Package: linux-2.6
Version: 3.0.0-3
Severity: important
Dear Maintainer,
I run daily-updated testing on an HP Mini 5102 with N10 graphics card (uses
i915) running XFCE4.8. When 3.0.0-1 kernel came in I installed both RT and non-
RT versions. On non-RT version, both suspend-to-ram and resume work as
expected. On RT kernel they work with only XFCE desktop running, however if
other programs are running as well (I've tried Chromium and Sylpheed), when
suspend is attempted, the screen goes black, fan runs high, and keyboard
becomes unresponsive, requiring a hard shutdown every time. I've reproduced
this about a dozen times.
Nothing unusual in pm-suspend log that I could see.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-rt-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-8) ) #1 SMP PREEMPT RT Sat Aug 27 17:34:31 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64
root=UUID=c3ec997b-c6e2-4fb0-882c-de8659f24c67 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 8.310756] lis3lv02d: 8 bits sensor found
[ 8.516681] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input4
[ 8.517505] Registered led device: hp::hddprotect
[ 8.517687] hp_accel: driver loaded
[ 8.531302] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.531316] i915 0000:00:02.0: setting latency timer to 64
[ 8.800468] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.836526] cfg80211: Calling CRDA to update world regulatory domain
[ 8.960305] brcmutil: module is from the staging directory, the quality is
unknown, you have been warned.
[ 9.019973] brcmsmac: module is from the staging directory, the quality is
unknown, you have been warned.
[ 9.053201] udevd[284]: renamed network interface eth0 to eth2
[ 9.065379] brcmsmac 0000:01:00.0: bus 1 slot 0 func 0 irq 5
[ 9.065413] brcmsmac 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.065430] brcmsmac 0000:01:00.0: setting latency timer to 64
[ 9.410152] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 9.410195] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.410202] [drm] Driver supports precise vblank timestamp query.
[ 9.410639] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.439655] Bluetooth: Core ver 2.16
[ 9.439807] NET: Registered protocol family 31
[ 9.439812] Bluetooth: HCI device and connection manager initialized
[ 9.439826] Bluetooth: HCI socket layer initialized
[ 9.439835] Bluetooth: L2CAP socket layer initialized
[ 9.442829] Bluetooth: SCO socket layer initialized
[ 9.503908] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.526989] usbcore: registered new interface driver btusb
[ 9.560717] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04711/0xa00000/0x20000
[ 9.614898] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input6
[ 9.787574] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 9.995473] [drm] initialized overlay support
[ 10.112655] fbcon: inteldrmfb (fb0) is primary device
[ 10.172831] Console: switching to colour frame buffer device 170x48
[ 10.184657] fb0: inteldrmfb frame buffer device
[ 10.184661] drm: registered panic notifier
[ 10.456646] Linux media interface: v0.10
[ 10.538740] Linux video capture interface: v2.00
[ 10.580876] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 10.640657] input: CNF8243 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
[ 10.642721] usbcore: registered new interface driver uvcvideo
[ 10.642729] USB Video Class driver (v1.1.0)
[ 10.736584] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.805124] acpi device:0d: registered as cooling_device7
[ 10.809775] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 10.817365] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.818274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.824494] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.824524] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.824547] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 10.824746] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 10.827892] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.033348] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 11.049235] input: HDA Intel Mic at Ext Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.051078] input: HDA Intel HP Out at Ext Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.226707] Adding 3994620k swap on /dev/sda5. Priority:-1 extents:1
across:3994620k
[ 12.247524] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.475796] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.737012] loop: module loaded
[ 14.883410] fuse init (API version 7.16)
[ 18.532149] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet
Project Team
[ 18.534783] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
[ 18.534849] NET: Registered protocol family 12
[ 18.749871] sky2 0000:43:00.0: eth2: enabling interface
[ 18.750660] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 19.436429] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 21.083696] Bluetooth: RFCOMM TTY layer initialized
[ 21.083739] Bluetooth: RFCOMM socket layer initialized
[ 21.083746] Bluetooth: RFCOMM ver 1.11
[ 21.106115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.106123] Bluetooth: BNEP filters: protocol multicast
[ 23.400663] lp: driver loaded but no devices found
[ 23.714855] ppdev: user-space parallel port driver
[ 30.079714] ieee80211 phy0: wl_ops_config: change monitor mode: false
(implement)
[ 30.079728] ieee80211 phy0: wl_ops_config: change power-save mode: false
(implement)
[ 30.097372] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[ 30.098997] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.978949] ieee80211 phy0: wl_ops_config: change monitor mode: false
(implement)
[ 38.978961] ieee80211 phy0: wl_ops_config: change power-save mode: false
(implement)
[ 38.980605] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[ 38.981897] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.607284] sky2 0000:43:00.0: eth2: disabling interface
[ 39.638323] sky2 0000:43:00.0: eth2: enabling interface
[ 39.639629] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 40.311245] ieee80211 phy0: wl_ops_config: change monitor mode: false
(implement)
[ 40.311258] ieee80211 phy0: wl_ops_config: change power-save mode: false
(implement)
[ 40.317235] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[ 40.318218] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 46.432715] wlan0: authenticate with 00:17:3f:c8:5f:8e (try 1)
[ 46.434635] wlan0: authenticated
[ 46.434791] wlan0: associate with 00:17:3f:c8:5f:8e (try 1)
[ 46.437195] wlan0: RX AssocResp from 00:17:3f:c8:5f:8e (capab=0x71 status=0
aid=3)
[ 46.437204] wlan0: associated
[ 46.440164] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[ 46.440180] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[ 46.440217] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 0 (implement)
[ 46.441764] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.747388] Intel AES-NI instructions are not detected.
[ 52.905145] padlock_aes: VIA PadLock not detected.
[ 56.955452] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 1 (implement)
[ 56.976066] wlan0: no IPv6 routers present
[ 57.944905] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Mini 5102 (VB558AV)
product_version: 0000000000000000000000000
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68PGU Ver. F.08
board_vendor: Hewlett-Packard
board_name: 3653
board_version: KBC Version 43.1E
** Loaded modules:
Module Size Used by
cryptd 14601 0
aes_x86_64 16796 1
aes_generic 33026 1 aes_x86_64
acpi_cpufreq 13009 1
mperf 12453 1 acpi_cpufreq
parport_pc 22395 0
ppdev 12763 0
cpufreq_conservative 13147 0
cpufreq_userspace 12576 0
lp 13138 0
parport 31913 3 parport_pc,ppdev,lp
cpufreq_powersave 12454 0
cpufreq_stats 12862 0
bnep 17631 2
rfcomm 33885 10
decnet 65645 0 [permanent]
uinput 17433 1
fuse 66275 1
loop 22666 0
snd_hda_codec_idt 53749 1
arc4 12458 2
uvcvideo 61887 0
videodev 66729 1 uvcvideo
media 18200 2 uvcvideo,videodev
joydev 17186 0
v4l2_compat_ioctl32 16531 1 videodev
hp_wmi 13329 0
sparse_keymap 12795 1 hp_wmi
btusb 17462 2
bluetooth 118309 23 bnep,rfcomm,btusb
evdev 17482 16
brcmsmac 528689 0
brcmutil 13419 1 brcmsmac
mac80211 186805 1 brcmsmac
snd_hda_intel 26140 2
snd_hda_codec 72735 2 snd_hda_codec_idt,snd_hda_intel
pcspkr 12579 0
snd_hwdep 13194 1 snd_hda_codec
cfg80211 136660 2 brcmsmac,mac80211
psmouse 55614 0
serio_raw 12846 0
rfkill 19040 4 hp_wmi,bluetooth,cfg80211
snd_pcm 67907 2 snd_hda_intel,snd_hda_codec
snd_seq 45182 0
crc_ccitt 12347 1 brcmsmac
snd_timer 22549 2 snd_pcm,snd_seq
snd_seq_device 13137 1 snd_seq
i915 347327 2
container 12581 0
drm_kms_helper 27216 1 i915
hp_accel 21104 0
snd 52898 12
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
lis3lv02d 17911 1 hp_accel
drm 167542 3 i915,drm_kms_helper
input_polldev 12906 1 lis3lv02d
wmi 13243 1 hp_wmi
i2c_algo_bit 12850 1 i915
soundcore 13204 1 snd
battery 13109 0
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
ac 12624 0
power_supply 13475 2 battery,ac
i2c_core 23961 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
button 12930 1 i915
video 17707 1 i915
processor 27994 3 acpi_cpufreq
ext4 318455 1
mbcache 13066 1 ext4
jbd2 62433 1 ext4
crc16 12343 2 bluetooth,ext4
sg 25946 0
sd_mod 36173 3
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
ata_piix 25358 2
libata 149011 2 ata_generic,ata_piix
uhci_hcd 26747 0
ehci_hcd 40050 0
scsi_mod 166720 3 sg,sd_mod,libata
sky2 45388 0
usbcore 128195 5 uvcvideo,btusb,uhci_hcd,ehci_hcd
fan 12674 0
thermal 17426 0
thermal_sys 17949 4 video,processor,fan,thermal
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether aa:00:04:00:0a:04 brd ff:ff:ff:ff:ff:ff
dnet 1.10/16 scope global eth2
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:26:82:a6:12:cf brd ff:ff:ff:ff:ff:ff
inet 10.1.1.5/24 brd 10.1.1.255 scope global wlan0
inet6 fe80::226:82ff:fea6:12cf/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1104 8 0 0 0 0 0 0 1104
8 0 0 0 0 0 0
eth2: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 185181 483 0 0 0 0 0 0 53188
193 0 0 0 0 0 0
*** Protocol statistics:
Ip:
484 total packets received
0 forwarded
0 incoming packets discarded
200 incoming packets delivered
175 requests sent out
51 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
91 segments received
87 segments send out
1 segments retransmited
0 bad segments received.
3 resets sent
Udp:
100 packets received
0 packets to unknown port received.
0 packet receive errors
84 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
1 delayed acks sent
45 packet headers predicted
30 acknowledgments not containing data payload received
1 other TCP timeouts
IpExt:
InMcastPkts: 35
OutMcastPkts: 15
InBcastPkts: 2
InOctets: 180883
OutOctets: 43700
InMcastOctets: 5779
OutMcastOctets: 3483
InBcastOctets: 656
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 94480000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 50a0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 94300000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 94400000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 94500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 94200000-942fffff
Prefetchable memory behind bridge: 0000000094a00000-0000000094bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=42, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 90200000-941fffff
Prefetchable memory behind bridge: 0000000094800000-00000000949fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=43, subordinate=43, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 0000000094600000-00000000947fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 5060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 5020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 94504400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=44, subordinate=44, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE
Controller [8086:27c0] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 5080 [size=16]
Region 5: Memory at 94504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n
[14e4:4353] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 94200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
43:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Yukon Optima
88E8059 [PCIe Gigabit Ethernet Controller with AVB] [11ab:4381] (rev 11)
Subsystem: Hewlett-Packard Company Device [103c:3653]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Expansion ROM at 94600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 03f0:231d Hewlett-Packard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-rt-amd64 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-rt-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.3
ii module-init-tools 3.16-1
Versions of packages linux-image-3.0.0-1-rt-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.0.0-1-rt-amd64 suggests:
pn grub-pc 1.99-12
pn linux-doc-3.0.0 <none>
Versions of packages linux-image-3.0.0-1-rt-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-rt-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-rt-amd64/postinst/depmod-error-initrd-3.0.0-1-rt-amd64:
false
linux-image-3.0.0-1-rt-amd64/postinst/missing-firmware-3.0.0-1-rt-amd64:
linux-image-3.0.0-1-rt-amd64/prerm/removing-running-kernel-3.0.0-1-rt-amd64:
true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
