Hi Julien,
Le -28163-01--10 14:59, Julien BLACHE a écrit :
Filipus Klutiero<[email protected]> wrote:
Hi,
and one in software. The CPU still heats too much under load. It
reaches 86° with cpuburn (TJMax is 90°) and still throttles. But
mcelog also no longer reports machine check events. It is difficult to
What you're seeing is most likely a difference between the trip
temperature set in firmware (ACPI) and the trip temperature at which the
CPU raises an MCE.
JB.
thank you.
# acpi -it
[...]
Thermal 1: ok, 51.0 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 90.0
degrees C
Thermal 1: trip point 1 switches to mode passive at temperature 85.0
degrees C
So you think that my CPU reached 90° even though it throttles starting
from 86°?
Note that the first overheating was reported in August and the PC was
cleaned by professionals on April 20th, so it had only accumulated dust
for 4 months.
Also, why was this report closed?
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
