reassign 648826 tp-smapi-source stop On Tue, Nov 15, 2011 at 02:25:50PM +0100, Salvo Tomaselli wrote: > Package: linux-2.6 > > Version: 3.1.1-1 > Severity: normal > Tags: upstream > > I have a lenovo thinkpad E520 and i was attempting to use hdapsd but i can't > load the hdaps module: > > FATAL: Error inserting hdaps (/lib/modules/3.1.0-1-amd64/updates/hdaps.ko): > No such device or address > > the hardware supports disk protection.
why would that be an linux-2.6 bug, never seen it shipping that thingy!? (; next time check with dpkg -S hdaps.ko to whom that belongs. > -- Package-specific info: > ** Version: > Linux version 3.1.0-1-amd64 (Debian 3.1.1-1) (b...@decadent.org.uk) (gcc > version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:02:25 UTC 2011 > > ** Command line: > BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 > root=UUID=c6438b86-a1c0-4336-9950-0c597e8bfe4a ro quiet > > ** Tainted: O (4096) > * Out-of-tree module has been loaded. next hint!? > ** Kernel log: > [ 9176.240675] restoring control 00000000-0000-0000-0000-000000000101/0/2 > [ 9176.240683] restoring control 00000000-0000-0000-0000-000000000101/1/3 > [ 9176.240687] restoring control 00000000-0000-0000-0000-000000000101/2/6 > [ 9176.240692] restoring control 00000000-0000-0000-0000-000000000101/3/7 > [ 9176.240696] restoring control 00000000-0000-0000-0000-000000000101/4/8 > [ 9176.240700] restoring control 00000000-0000-0000-0000-000000000101/5/9 > [ 9176.240705] restoring control 00000000-0000-0000-0000-000000000101/6/10 > [ 9176.240709] restoring control 00000000-0000-0000-0000-000000000101/8/1 > [ 9176.240714] restoring control 00000000-0000-0000-0000-000000000101/12/11 > [ 9176.243265] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: > -32 (exp. 2). > [ 9176.243275] uvcvideo 1-1.5:1.0: reset_resume error -5 > [ 9176.391601] sdhci-pci 0000:03:00.0: setting latency timer to 64 > [ 9178.514371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 9178.730470] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 9178.730481] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) > filtered out > [ 9178.730489] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered > out > [ 9178.766000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded > [ 9178.766011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) > filtered out > [ 9178.766019] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered > out > [ 9178.769887] ata1.00: configured for UDMA/133 > [ 9178.792624] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9178.858664] PM: resume of devices complete after 2972.943 msecs > [ 9178.859229] PM: Finishing wakeup. > [ 9178.859233] Restarting tasks ... done. > [ 9178.863306] video LNXVIDEO:00: Restoring backlight state > [ 9178.966925] cfg80211: Calling CRDA to update world regulatory domain > [ 9180.159858] CPU1: Package power limit notification (total events = 1) > [ 9180.159862] CPU0: Package power limit notification (total events = 1) > [ 9180.159878] CPU3: Package power limit notification (total events = 1) > [ 9180.159881] CPU2: Package power limit notification (total events = 1) > [ 9180.177881] CPU1: Package power limit normal > [ 9180.177884] CPU0: Package power limit normal > [ 9180.177905] CPU3: Package power limit normal > [ 9180.177908] CPU2: Package power limit normal > [ 9184.674270] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9184.737443] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9185.103020] r8169 0000:02:00.0: eth0: link down > [ 9185.103805] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 9189.386717] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9189.478528] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9190.529419] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9190.614498] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9191.011313] r8169 0000:02:00.0: eth0: link down > [ 9191.012203] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 9191.342176] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9191.417425] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9193.759098] wlan0: authenticate with e8:ba:70:e6:19:82 (try 1) > [ 9193.761327] wlan0: authenticated > [ 9193.761592] wlan0: associate with e8:ba:70:e6:19:82 (try 1) > [ 9193.768175] wlan0: RX AssocResp from e8:ba:70:e6:19:82 (capab=0x431 > status=0 aid=168) > [ 9193.768184] wlan0: associated > [ 9193.775379] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 9202.597629] wlan0: deauthenticating from e8:ba:70:e6:19:82 by local choice > (reason=3) > [ 9202.766027] cfg80211: Calling CRDA for country: SE > [ 9202.849962] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9202.952135] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9203.305739] r8169 0000:02:00.0: eth0: link down > [ 9203.306595] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 9203.571700] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9203.655646] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9203.771097] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9203.856090] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9204.277281] r8169 0000:02:00.0: eth0: link down > [ 9204.278138] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 9208.460296] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9208.531499] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9208.934782] r8169 0000:02:00.0: eth0: link down > [ 9208.935192] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 9209.166251] iwlagn 0000:08:00.0: L1 Enabled; Disabling L0S > [ 9209.236545] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 9211.381282] wlan0: authenticate with e8:ba:70:e6:19:82 (try 1) > [ 9211.383798] wlan0: authenticated > [ 9211.383939] wlan0: associate with e8:ba:70:e6:19:82 (try 1) > [ 9211.390217] wlan0: RX AssocResp from e8:ba:70:e6:19:82 (capab=0x431 > status=0 aid=168) > [ 9211.390221] wlan0: associated > [ 9211.394612] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 9220.054926] iwlagn 0000:08:00.0: Tx aggregation enabled on ra = > e8:ba:70:e6:19:82 tid = 0 > [ 9221.484092] wlan0: no IPv6 routers present > [ 9295.073504] [Hardware Error]: Machine check events logged > [11496.172836] Disabling lock debugging due to kernel taint > [11496.173876] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11496.173880] thinkpad_ec: initial ec test failed > [11506.492408] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11506.492418] thinkpad_ec: initial ec test failed > [11538.869556] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11538.869560] thinkpad_ec: initial ec test failed > [11781.705857] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11781.705862] thinkpad_ec: initial ec test failed > [11838.258922] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11838.258927] thinkpad_ec: initial ec test failed > [11924.716005] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11924.716010] thinkpad_ec: initial ec test failed > [11947.454632] tps65010: version 2 May 2005 > [11947.484634] tps65010: no chip? > [11952.724330] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [11952.724342] thinkpad_ec: initial ec test failed > [12102.241187] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [12102.241192] thinkpad_ec: initial ec test failed > [12322.112803] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: > (0x01:0x00)->0xfffffff0 > [12322.112813] thinkpad_ec: initial ec test failed > > ** Model information > sys_vendor: LENOVO > product_name: 11433LG > product_version: ThinkPad E520 > chassis_vendor: LENOVO > chassis_version: Not Available > bios_vendor: LENOVO > bios_version: 8HET35WW(1.17) > board_vendor: LENOVO > board_name: 11433LG > board_version: Not Available > > ** Loaded modules: > Module Size Used by > tps65023_regulator 13101 0 > regmap_i2c 12482 1 tps65023_regulator > tps6507x_regulator 13388 0 > tps6507x_ts 12663 0 > cryptd 14517 0 > aes_x86_64 16796 2 > aes_generic 33026 1 aes_x86_64 > acpi_cpufreq 12935 0 > mperf 12453 1 acpi_cpufreq > cpufreq_conservative 13147 0 > cpufreq_stats 12866 0 > cpufreq_userspace 12576 0 > cpufreq_powersave 12454 0 > binfmt_misc 12957 1 > input_polldev 12906 0 > fuse 61981 1 > loop 22597 0 > snd_hda_codec_hdmi 26548 1 > snd_hda_codec_conexant 45245 1 > arc4 12458 2 > joydev 17266 0 > iwlagn 166592 0 > uvcvideo 57788 0 > videodev 70858 1 uvcvideo > mac80211 183093 1 iwlagn > media 18148 2 uvcvideo,videodev > v4l2_compat_ioctl32 16567 1 videodev > snd_hda_intel 26182 2 > i915 348449 2 > snd_hda_codec 72799 3 > snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel > drm_kms_helper 27227 1 i915 > battery 13109 0 > ac 12624 0 > snd_hwdep 13186 1 snd_hda_codec > snd_pcm_oss 41081 0 > snd_mixer_oss 17916 1 snd_pcm_oss > snd_pcm 63744 4 > snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm_oss > psmouse 55543 0 > drm 167371 3 i915,drm_kms_helper > i2c_i801 16870 0 > thinkpad_acpi 61270 0 > acer_wmi 21931 0 > i2c_algo_bit 12841 1 i915 > cfg80211 132703 2 iwlagn,mac80211 > i2c_core 23876 8 > tps65023_regulator,regmap_i2c,videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit > power_supply 13475 2 battery,ac > sparse_keymap 12760 1 acer_wmi > serio_raw 12850 0 > snd_timer 22917 1 snd_pcm > evdev 17562 13 > pcspkr 12579 0 > snd_page_alloc 13003 2 snd_hda_intel,snd_pcm > rfkill 19012 3 thinkpad_acpi,acer_wmi,cfg80211 > snd 52798 14 > snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,thinkpad_acpi,snd_timer > soundcore 13065 1 snd > nvram 13049 1 thinkpad_acpi > video 17628 1 i915 > button 12937 1 i915 > wmi 13243 1 acer_wmi > processor 27949 1 acpi_cpufreq > ext4 312988 2 > mbcache 13065 1 ext4 > jbd2 62015 1 ext4 > crc16 12343 1 ext4 > usb_storage 43919 0 > uas 13296 0 > sg 25874 0 > sd_mod 36136 4 > sr_mod 21899 0 > cdrom 35401 1 sr_mod > crc_t10dif 12348 1 sd_mod > thermal 17383 0 > thermal_sys 18040 3 video,processor,thermal > ahci 24997 3 > libahci 22860 1 ahci > libata 140545 2 ahci,libahci > ehci_hcd 40215 0 > scsi_mod 162376 6 usb_storage,uas,sg,sr_mod,sd_mod,libata > usbcore 124095 5 uvcvideo,usb_storage,uas,ehci_hcd > sdhci_pci 13483 0 > sdhci 26577 1 sdhci_pci > mmc_core 63754 1 sdhci > r8169 42391 0 > mii 12675 1 r8169 > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor > Family DRAM Controller [8086:0104] (rev 09) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > Kernel driver in use: agpgart-intel > > 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation > Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) > (prog-if 00 [VGA controller]) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 42 > Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at 5000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: <access denied> > Kernel driver in use: i915 > > 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 > Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx+ > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at d2605000 (64-bit, non-prefetchable) [size=16] > Capabilities: <access denied> > > 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset > Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 > [EHCI]) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at d260a000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset > Family High Definition Audio Controller [8086:1c20] (rev 04) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 44 > Region 0: Memory at d2600000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal > decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00004000-00004fff > Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=07, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: d1e00000-d25fffff > Prefetchable memory behind bridge: 00000000d0500000-00000000d0cfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 > Memory behind bridge: d1d00000-d1dfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=09, subordinate=0d, sec-latency=0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: d1500000-d1cfffff > Prefetchable memory behind bridge: 00000000d0d00000-00000000d14fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset > Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 > [EHCI]) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at d2609000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC > Controller [8086:1c49] (rev 04) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > > 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series > Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 > [AHCI 1.0]) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 41 > Region 0: I/O ports at 5088 [size=8] > Region 1: I/O ports at 5094 [size=4] > Region 2: I/O ports at 5080 [size=8] > Region 3: I/O ports at 5090 [size=4] > Region 4: I/O ports at 5060 [size=32] > Region 5: Memory at d2608000 (32-bit, non-prefetchable) [size=2K] > Capabilities: <access denied> > Kernel driver in use: ahci > > 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family > SMBus Controller [8086:1c22] (rev 04) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at d2604000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at efa0 [size=32] > Kernel driver in use: i801_smbus > > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 40 > Region 0: I/O ports at 4000 [size=256] > Region 2: Memory at d0404000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at d0400000 (64-bit, prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: r8169 > > 03:00.0 System peripheral [0880]: Ricoh Co Ltd Device [1180:e823] (rev 07) > (prog-if 01) > Subsystem: Lenovo Device [17aa:21e2] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at d1e00000 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: sdhci-pci > > 08:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 > [8086:0084] > Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 43 > Region 0: Memory at d1d00000 (64-bit, non-prefetchable) [size=8K] > Capabilities: <access denied> > Kernel driver in use: iwlagn > > > ** USB devices: > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > Bus 001 Device 003: ID 04f2:b257 Chicony Electronics Co., Ltd > > > -- System Information: > Debian Release: wheezy/sid > APT prefers unstable > APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores) > Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-3.1.0-1-amd64 depends on: > ii debconf [debconf-2.0] 1.5.41 > ii initramfs-tools [linux-initramfs-tool] 0.99 > ii linux-base 3.4 > ii module-init-tools 3.16-1 > > Versions of packages linux-image-3.1.0-1-amd64 recommends: > pn firmware-linux-free <none> > > Versions of packages linux-image-3.1.0-1-amd64 suggests: > pn extlinux 2:4.04+dfsg-7 > pn grub-pc 1.99-14 > pn linux-doc-3.1 <none> > > Versions of packages linux-image-3.1.0-1-amd64 is related to: > pn firmware-bnx2 <none> > pn firmware-bnx2x <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > pn firmware-iwlwifi 0.34 > pn firmware-linux <none> > pn firmware-linux-nonfree <none> > pn firmware-qlogic <none> > pn firmware-ralink <none> > pn xen-hypervisor <none> > > -- debconf information: > * linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64: > linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: > linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false > linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true > > > > -- > To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: http://lists.debian.org/20111115132550.20859.42886.reportbug@hal9000 > -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org