Package: linux-2.6 Version: 3.1.4-1 Severity: normal
Dear Maintainer, yesterday I decided to get a webcam and got the above mentioned error with two different uvc-supported models (Logitech C270, MS HD 5000). I have a HP dc5850 microtower, it has an AMD Phenom II with AMD780 chipset (Radeon 3100 integrated graphics). Each time I plugged the Logitech C270 into the system, two other USB devices (Samsung Printer, DLink wireless) stopped working. I only got the other devices working again through a reboot, simple unloading/reloading of the modules wouldn't help. Most of the times also the USB mouse (MS Wireless 5000) would quit (the keyboard is PS/2). I installed the webcam successfully on Windows 7, but when booting into Linux the USB devices stopped working. I returned the Logitech and got a Microsoft HD-5000 webcam instead. I installed it in Windows 7 and rebooted to Linux. I was able to make a test call with Skype on Linux and see my test image there, but when I quit Skype the USB devices stopped working, and rebooting with the webcam attached didn't help, i had to reboot again without the webcam. There is a similar problem described here, but without a solution: http://lkml.org/lkml/2011/4/25/22 I asked for help on the linux-uvc-devel list: Alexey Fisher advised me to try older kernel versions and certain USB options. I tried Debian kernels 2.6.32 and 2.6.38, both would boot with USB up, but as soon as I accessed the webcam, USB would go down with similar error messages as current kernels. Setting "echo -1 > /sys/module/usbcore/parameters/autosuspend" or "echo Y > /sys/module/usbcore/parameters/old_scheme_first" didn't help either. Today I was able to work around this problem by plugging the camera into the frontside USB ports, before I had been using the backside ports. Seems to be a different controller, in the log files it is now usb 2-4 instead of 1-4 or the like. I am attaching parts of my kern.log. If you need more info, I am glad to give it... Thanks for your work! Michael Attaching the Logitech C270: Dec 1 15:55:22 ossietzky kernel: [ 352.973454] usb 1-4: New USB device found, idVendor=046d, idProduct=0825 Dec 1 15:55:22 ossietzky kernel: [ 352.973465] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 Dec 1 15:55:22 ossietzky kernel: [ 352.973473] usb 1-4: SerialNumber: 8D2C8ED0 Dec 1 15:55:23 ossietzky kernel: [ 354.218816] Linux media interface: v0.10 Dec 1 15:55:23 ossietzky kernel: [ 354.229217] Linux video capture interface: v2.00 Dec 1 15:55:24 ossietzky kernel: [ 355.264233] 5:3:3: cannot get freq at ep 0x86 Dec 1 15:55:24 ossietzky kernel: [ 355.403959] usbcore: registered new interface driver snd-usb-audio Dec 1 15:55:24 ossietzky kernel: [ 355.403999] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825) Dec 1 15:55:24 ossietzky kernel: [ 355.419004] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input9 Dec 1 15:55:24 ossietzky kernel: [ 355.419162] usbcore: registered new interface driver uvcvideo Dec 1 15:55:24 ossietzky kernel: [ 355.419168] USB Video Class driver (1.1.1) Dec 1 15:55:24 ossietzky kernel: [ 355.610354] ehci_hcd 0000:00:12.2: force halt; handshake ffffc90000326424 00004000 00000000 -> -110 Dec 1 15:55:24 ossietzky kernel: [ 355.610366] ehci_hcd 0000:00:12.2: HC died; cleaning up Dec 1 15:55:24 ossietzky kernel: [ 355.610430] usb 1-2: USB disconnect, device number 3 Dec 1 15:55:24 ossietzky kernel: [ 355.610894] wlan0: deauthenticating from 00:c0:02:1a:80:bc by local choice (reason=3) Dec 1 15:55:24 ossietzky kernel: [ 355.732203] cfg80211: Calling CRDA to update world regulatory domain Dec 1 15:55:26 ossietzky kernel: [ 357.152254] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.152370] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.152445] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.152488] usb 1-3: USB disconnect, device number 4 Dec 1 15:55:26 ossietzky kernel: [ 357.152857] usb 1-4: USB disconnect, device number 5 Dec 1 15:55:26 ossietzky kernel: [ 357.153172] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.153865] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.154647] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.154687] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.154751] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.155342] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.155978] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.156948] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.157033] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.157274] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.158023] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.158847] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.160317] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.160404] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.160666] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.161445] 5:3:4: usb_set_interface failed Dec 1 15:55:26 ossietzky kernel: [ 357.162302] 5:3:4: usb_set_interface failed Etc. Microsoft HD-5000 loads successfully, turns bad: Dec 1 16:57:47 ossietzky kernel: [ 1459.700093] usb 1-5: new high speed USB device number 5 using ehci_hcd Dec 1 16:57:47 ossietzky kernel: [ 1459.848657] usb 1-5: New USB device found, idVendor=045e, idProduct=076d Dec 1 16:57:47 ossietzky kernel: [ 1459.848661] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Dec 1 16:57:47 ossietzky kernel: [ 1459.848664] usb 1-5: Product: Microsoft® LifeCam HD-5000 Dec 1 16:57:47 ossietzky kernel: [ 1459.848666] usb 1-5: Manufacturer: Microsoft Dec 1 16:57:48 ossietzky kernel: [ 1460.465318] Linux media interface: v0.10 Dec 1 16:57:48 ossietzky kernel: [ 1460.476086] Linux video capture interface: v2.00 Dec 1 16:57:49 ossietzky kernel: [ 1461.584177] 5:3:1: cannot get freq at ep 0x82 Dec 1 16:57:49 ossietzky kernel: [ 1461.587036] usbcore: registered new interface driver snd-usb-audio Dec 1 16:57:49 ossietzky kernel: [ 1461.587042] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d) Dec 1 16:57:49 ossietzky kernel: [ 1461.592307] input: Microsoft® LifeCam HD-5000 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input9 Dec 1 16:57:49 ossietzky kernel: [ 1461.592388] usbcore: registered new interface driver uvcvideo Dec 1 16:57:49 ossietzky kernel: [ 1461.592390] USB Video Class driver (1.1.1) Dec 1 16:57:50 ossietzky kernel: [ 1462.784195] 5:3:1: cannot get freq at ep 0x82 Dec 1 16:57:51 ossietzky kernel: [ 1463.908198] 5:3:1: cannot get freq at ep 0x82 ... Dec 1 17:00:02 ossietzky kernel: [ 1594.705830] wlan0: associate with 00:c0:02:1a:80:bc (try 1) Dec 1 17:00:02 ossietzky kernel: [ 1594.708637] wlan0: RX AssocResp from 00:c0:02:1a:80:bc (capab=0x471 status=0 aid=3) Dec 1 17:00:02 ossietzky kernel: [ 1594.708641] wlan0: associated Dec 1 17:00:02 ossietzky kernel: [ 1594.721821] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Dec 1 17:00:13 ossietzky kernel: [ 1605.728012] wlan0: no IPv6 routers present Dec 1 17:00:25 ossietzky kernel: [ 1617.612006] ehci_hcd 0000:00:12.2: force halt; handshake ffffc90000326424 00004000 00000000 -> -110 Dec 1 17:00:25 ossietzky kernel: [ 1617.612006] ehci_hcd 0000:00:12.2: HC died; cleaning up Dec 1 17:00:25 ossietzky kernel: [ 1617.612284] usb 1-2: USB disconnect, device number 6 Dec 1 17:00:25 ossietzky kernel: [ 1617.628461] wlan0: deauthenticating from 00:c0:02:1a:80:bc by local choice (reason=3) Dec 1 17:00:25 ossietzky kernel: [ 1617.680162] cfg80211: Calling CRDA to update world regulatory domain Dec 1 17:00:26 ossietzky kernel: [ 1619.080244] usb 1-3: USB disconnect, device number 4 Dec 1 17:00:26 ossietzky kernel: [ 1619.080377] usb 1-5: USB disconnect, device number 5 -- Package-specific info: ** Version: Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (wa...@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=66e75d80-ed82-400a-9c84-397b29fef7ce ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 6.542504] [drm] pitch is 4608 [ 6.542584] fbcon: radeondrmfb (fb0) is primary device [ 6.568759] Console: switching to colour frame buffer device 144x54 [ 6.577371] fb0: radeondrmfb frame buffer device [ 6.577373] drm: registered panic notifier [ 6.577379] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0 [ 6.603470] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 6.606476] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 6.609463] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 6.612465] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS [ 6.615460] scsi 4:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS [ 6.615490] scsi: killing requests for dead queue [ 6.615528] scsi: killing requests for dead queue [ 6.615558] scsi: killing requests for dead queue [ 6.615587] scsi: killing requests for dead queue [ 6.615616] scsi: killing requests for dead queue [ 6.615645] scsi: killing requests for dead queue [ 6.615674] scsi: killing requests for dead queue [ 6.615703] scsi: killing requests for dead queue [ 6.680321] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 6.687940] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 6.713074] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 6.715565] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.720567] sd 4:0:0:4: [sdf] Attached SCSI removable disk [ 6.812516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8 [ 6.867015] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.867437] Registered led device: rt73usb-phy0::radio [ 6.867452] Registered led device: rt73usb-phy0::assoc [ 6.867466] Registered led device: rt73usb-phy0::quality [ 6.868170] usbcore: registered new interface driver rt73usb [ 8.038433] Adding 3004148k swap on /dev/sda2. Priority:-1 extents:1 across:3004148k [ 8.333928] EXT3-fs (sda4): using internal journal [ 8.571040] loop: module loaded [ 8.590124] smsc47b397: found SMSC SCH5317 (base address 0x0880, revision 1) [ 12.948663] fuse init (API version 7.17) [ 13.384597] kjournald starting. Commit interval 5 seconds [ 13.384819] EXT3-fs (dm-3): using internal journal [ 13.384823] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 13.446185] kjournald starting. Commit interval 5 seconds [ 13.446429] EXT3-fs (dm-2): using internal journal [ 13.446433] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 13.649802] kjournald starting. Commit interval 5 seconds [ 13.650065] EXT3-fs (dm-0): using internal journal [ 13.650068] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 13.699924] kjournald starting. Commit interval 5 seconds [ 13.700183] EXT3-fs (dm-1): using internal journal [ 13.700186] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 20.818970] Disabling lock debugging due to kernel taint [ 20.823635] vboxdrv: Found 4 processor cores. [ 20.823937] vboxdrv: fAsync=0 offMin=0x31f offMax=0x1977 [ 20.824031] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 20.824033] vboxdrv: Successfully loaded version 4.1.6_Debian (interface 0x00190000). [ 21.850197] vboxpci: IOMMU not found (not registered) [ 26.400560] tg3 0000:3f:00.0: irq 41 for MSI/MSI-X [ 26.448328] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.855786] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.916023] wlan0: authenticate with 00:c0:02:1a:80:bc (try 1) [ 30.917777] wlan0: authenticated [ 30.973258] wlan0: associate with 00:c0:02:1a:80:bc (try 1) [ 30.975888] wlan0: RX AssocResp from 00:c0:02:1a:80:bc (capab=0x471 status=0 aid=4) [ 30.975891] wlan0: associated [ 30.988059] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.444102] Bluetooth: Core ver 2.16 [ 41.444124] NET: Registered protocol family 31 [ 41.444126] Bluetooth: HCI device and connection manager initialized [ 41.444129] Bluetooth: HCI socket layer initialized [ 41.444130] Bluetooth: L2CAP socket layer initialized [ 41.444135] Bluetooth: SCO socket layer initialized [ 41.458206] Bluetooth: RFCOMM TTY layer initialized [ 41.458210] Bluetooth: RFCOMM socket layer initialized [ 41.458212] Bluetooth: RFCOMM ver 1.11 [ 41.549036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.549039] Bluetooth: BNEP filters: protocol multicast [ 41.632016] wlan0: no IPv6 routers present [ 46.633444] lp: driver loaded but no devices found [ 46.639368] ppdev: user-space parallel port driver [ 72.194693] powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor (4 cpu cores) (version 2.20.00) [ 72.194735] powernow-k8: 0 : pstate 0 (2600 MHz) [ 72.194737] powernow-k8: 1 : pstate 1 (1900 MHz) [ 72.194739] powernow-k8: 2 : pstate 2 (1400 MHz) [ 72.194741] powernow-k8: 3 : pstate 3 (800 MHz) [ 76.214148] Did not find alt setting 1 for intf 0, config 1 [ 175.600541] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 232.053230] evolution[3994]: segfault at 21 ip 00007fdea70cfe58 sp 00007fff6d0c1fa0 error 4 in libcamel-1.2.so.23.0.0[7fdea7084000+73000] [ 834.512062] usb 2-4: new high speed USB device number 3 using ehci_hcd [ 834.661116] usb 2-4: New USB device found, idVendor=045e, idProduct=076d [ 834.661126] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 834.661135] usb 2-4: Product: Microsoft® LifeCam HD-5000 [ 834.661141] usb 2-4: Manufacturer: Microsoft [ 835.266496] Linux media interface: v0.10 [ 835.272650] Linux video capture interface: v2.00 [ 836.376145] 3:3:1: cannot get freq at ep 0x82 [ 836.378923] usbcore: registered new interface driver snd-usb-audio [ 836.378960] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d) [ 836.387344] input: Microsoft® LifeCam HD-5000 as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input9 [ 836.387552] usbcore: registered new interface driver uvcvideo [ 836.387558] USB Video Class driver (1.1.1) [ 837.656136] 3:3:1: cannot get freq at ep 0x82 [ 838.800142] 3:3:1: cannot get freq at ep 0x82 [ 1023.272167] 3:3:1: cannot get freq at ep 0x82 ** Model information sys_vendor: Hewlett-Packard product_name: HP Compaq dc5850 Microtower product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 786F6 v03.10 board_vendor: Hewlett-Packard board_name: 3029h board_version: ** Loaded modules: uvcvideo videodev media v4l2_compat_ioctl32 snd_usb_audio snd_usbmidi_lib powernow_k8 mperf cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats parport_pc ppdev lp parport bnep rfcomm bluetooth crc16 pci_stub vboxpci (O) vboxnetadp (O) vboxnetflt (O) vboxdrv (O) binfmt_misc fuse smsc47b397 loop dm_crypt arc4 snd_hda_codec_analog tpm_infineon joydev rt73usb crc_itu_t snd_hda_intel snd_hda_codec rt2x00usb rt2x00lib snd_hwdep snd_pcm_oss snd_mixer_oss usbhid snd_pcm snd_seq_midi hid mac80211 radeon cfg80211 snd_rawmidi snd_seq_midi_event snd_seq snd_timer usb_storage uas ttm drm_kms_helper drm snd_seq_device edac_core i2c_algo_bit power_supply snd tpm_tis shpchp tpm tpm_bios edac_mce_amd soundcore hp_wmi psmouse sparse_keymap snd_page_alloc sp5100_tco rfkill pcspkr i2c_piix4 i2c_core processor pci_hotplug k10temp evdev serio_raw wmi thermal_sys button ext3 jbd mbcache dm_mod sr_mod sd_mod cdrom crc_t10dif ohci_hcd floppy ahci libahci ehci_hcd tg3 libphy libata scsi_mod usbcore ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:24:21:7b:ce:ac brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:24:01:9c:32:23 brd ff:ff:ff:ff:ff:ff inet 192.168.1.3/24 brd 192.168.1.255 scope global wlan0 inet6 fe80::224:1ff:fe9c:3223/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 413537 3533 0 0 0 0 0 0 413537 3533 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 6947059 15251 0 0 0 0 0 0 2582651 15780 0 0 0 0 0 0 *** Protocol statistics: Ip: 16849 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 16825 incoming packets delivered 18678 requests sent out 196 dropped because of missing route 44 reassemblies required 22 packets reassembled ok Icmp: 60 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 60 73 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 73 IcmpMsg: InType3: 60 OutType3: 73 Tcp: 649 active connections openings 37 passive connection openings 27 failed connection attempts 129 connection resets received 10 connections established 8700 segments received 9791 segments send out 387 segments retransmited 0 bad segments received. 595 resets sent Udp: 8080 packets received 73 packets to unknown port received. 0 packet receive errors 8639 packets sent UdpLite: TcpExt: 4 packets pruned from receive queue because of socket buffer overrun 166 TCP sockets finished time wait in fast timer 578 delayed acks sent Quick ack mode was activated 36 times 361 packets directly queued to recvmsg prequeue. 1699 bytes directly in process context from backlog 24498 bytes directly received in process context from prequeue 3440 packet headers predicted 77 packets header predicted and directly queued to user 941 acknowledgments not containing data payload received 807 predicted acknowledgments 8 congestion windows recovered without slow start by DSACK 148 congestion windows recovered without slow start after partial ack 2 timeouts after SACK recovery 225 other TCP timeouts 60 packets collapsed in receive queue due to low socket buffer 37 DSACKs sent for old packets 49 DSACKs received 185 connections reset due to unexpected data 128 connections reset due to early user close 17 connections aborted due to timeout TCPDSACKIgnoredNoUndo: 16 TCPSackShiftFallback: 17 IpExt: InMcastPkts: 56 OutMcastPkts: 45 InBcastPkts: 349 OutBcastPkts: 248 InOctets: 7028822 OutOctets: 2400730 InMcastOctets: 13995 OutMcastOctets: 6016 InBcastOctets: 77637 OutBcastOctets: 37965 ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR+ <PERR- INTx- Latency: 32 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f01fffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 Memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 2100 [size=16] Region 5: Memory at f0308000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0304000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0305000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0308400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0306000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0307000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at f0308500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 3100 Graphics [1002:9611] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 1100 [size=256] Region 2: Memory at f0100000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:3029] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04e8:342c Samsung Electronics Co., Ltd Bus 001 Device 004: ID 07d1:3c03 D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.C1) [Ralink RT73] Bus 002 Device 002: ID 0bda:0181 Realtek Semiconductor Corp. Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 002 Device 003: ID 045e:076d Microsoft Corp. LifeCam HD-5000 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (900, 'testing'), (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable'), (10, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.1.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.1.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-amd64 suggests: ii grub-pc 1.99-14 ii linux-doc-3.1 3.1.1-1 Versions of packages linux-image-3.1.0-1-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux 0.34 pn firmware-linux-nonfree 0.34 pn firmware-qlogic <none> pn firmware-ralink 0.34 pn xen-hypervisor <none> -- debconf information: linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org