Package: acpi-support Version: 0.138-10 Severity: important Hi,
Just did a fresh install of Debian Wheezy and noticed that the count of load cycles of my hard-drive are increasing constantly and at an undesired frequency. This issue is famous and was already reported five years ago as #448673 At that time, acpi-support upstream was updated to include some 90-hdparm.sh scripts at /etc/acpi to perform hdparm operations at due time, which solved the problem for debian package too. But, Debian´s acpi-support upstream is linked to Ubuntu´s package (as seen in http://packages.qa.debian.org/a/acpi-support.html). Some time later, Ubuntu´s own hdparm and pm-utils packages evolved to include a chain of other scritps that already took care of calling hdparm with correct parameters, starting from pm-powersave at /etc/acpi/. Those changes only affected Ubuntu. So 90hdparm.sh scripts became redundand at Ubuntu, and they were removed from its package. As it is the upstream for Debian acpi-support, they were also removed after an update - see Debian acpi-support 0.129-1 changelog for details. However, Debian do not have the same solution using pm-utils, so basically the load cycle bug was free again. As discussed extensively in the past, this may not even be considered a bug, and definitely is a hardware manufacturer´s problem. Also, now there are easy solutions: (i) just installing laptop-mode-tools or (ii) copying one of the 90-hdparms.sh scripts, now supplied at /usr/share/doc/acpi-support/examples/acpi/, to /etc/pm/power.d/. But the fact is, for a fresh new install, even including laptop packages, some hard drives may start cycling to death. I only noticed this because of the head parking noise, and when checked already have ~3K cycles in 120 hours of use. Have I noticed only one year later, maybe the counter was already at number much closer to it´s factory "limits". Maybe I'm missing something here, but that's what I've found these days. Info: # hdparm -i /dev/sda /dev/sda: Model=WDC WD7500BPVT-75HXZT3, FwRev=03.01A03, SerialNo=WD-WX81E81TDZ47 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=1465149168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode $ uname -a Linux trouble 3.2.0-1-amd64 #1 SMP Fri Feb 17 05:17:36 UTC 2012 x86_64 GNU/Linux Many thanks Igor