Hello Faidon, On 8/24/07, Faidon Liambotis <[EMAIL PROTECTED]> wrote: > > > > It would be better if you used a binary of our own[1] and preferrably > the latest upstream version 1.4.11 (i.e. packages >= 1:1.4.11~dfsg-1)
I just tried first the same call scenario without enabling dumping the core file and verbosity on my newly built asterisk-1.4.11~dfsg-1 on my Debian GNU/Linux Etch and still, the Asterisk crashed. I will try again performing the same call scenario with the core dump enable on my side so that I can send you the core dump file later on. After that, I will download and install the binary Asterisk related packages that you have from http://pkg-voip.buildserver.net/ and perform again the same call scenario on my side if the Asterisk will still crash. Anyway, below is the banner I got when entering to the Asterisk shell and following the version of my Asterisk: # asterisk -r Asterisk 1.4.11-BRIstuffed-0.4.0-test4, Copyright (C) 1999 - 2007 Digium, Inc. and others. Created by Mark Spencer <[EMAIL PROTECTED]> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.4.11-BRIstuffed-0.4.0-test4 currently running on gnubie (pid = 6382) gnubie*CLI> core show version Asterisk 1.4.11-BRIstuffed-0.4.0-test4 built by root @ gnubie on a i686 running Linux on 2007-08-24 04:31:28 UTC To a PSTN telephone through what? > zaptel? analog or ISDN? BRI or PRI? Which card exactly? Zaptel using the Digium's Dev Kit TDM400P with 1 FXO and 1 FXS. What version of zaptel are you using? > If this was an ISDN interface, what version of libpri are you using? # dpkg -l | grep zaptel ii zaptel 1.4.5~dfsg-1 zapata telephony utilities ii zaptel-modules-2.6.18-5-686 1.4.5~dfsg-1+2.6.18.dfsg.1-13etch1 zaptel modules for Linux (kernel 2.6.18-5-68 Please provide as much information as possible. Whatever you may think > that is important or unusual about your setup. I am using an OpenWengo SIP softphone on top of MS Windows XP laptop connected through a wireless network to the Asterisk PBX. Now, my PBX server hardware is based on an old Intel Celeron 1Ghz with 512MB RAM, Digium's Dev Kit with 1 FXO and 1 FXS, and an Atheros AR5005G PCMCIA card because this server of mine also act as my access point, firewall, gateway and router. I will list down below the information related to software: # cat /etc/debian_version 4.0 # uname -r 2.6.18-5-686 # dpkg -l | grep asterisk ii asterisk 1.4.11~dfsg-1 Open Source Private Branch Exchange (PBX) ii asterisk-config 1.4.11~dfsg-1 Configuration files for Asterisk ii asterisk-doc 1.4.11~dfsg-1 Source code documentation for Asterisk ii asterisk-sounds-main 1.4.11~dfsg-1 Core Sound files for Asterisk (English) # dpkg -l | grep zaptel ii zaptel 1.4.5~dfsg-1 zapata telephony utilities ii zaptel-modules-2.6.18-5-686 1.4.5~dfsg-1+2.6.18.dfsg.1-13etch1 zaptel modules for Linux (kernel 2.6.18-5-68 # dpkg -l | grep libtone ii libtonezone1 1.4.5~dfsg-1 tonezone library (runtime) I personally built the above packages on my Debian GNU/Linux Etch workstation and I got the source packages from the Debian Unstable repository. Unfortunately, it is working fine for me and for many others, so it is > something specific to your setup. Please do this scenario maybe at least 5 times until your Asterisk crash. Your call will be disconnected between 1 to 3 minutes but try to dial again and again even if you get an error because for sure, your zap channel will not be released, until such time that you can dial again to a PSTN number. All in all, a proper core dump with a known version will help us most. > Ok, I will do this later.. Thank you. GNUbie