Package: gnome-power-manager
Version: 2.20.2-3
Followup-For: Bug #472800
I am seeing the same behaviour on my sony vaio laptop.
Historically, this laptop had an etch system installed and at FOSDEM in
late february, i migrated to lenny.
With etch, gnome-power-manager was rather limited, it didn't catch the
power button press, and suspend-to-ram didn't work, even though doing it
by hand in /sys/power worked (well, it doesn't wake up, but you can at
least put it to sleep).
When i upgraded to lenny, i first had the dialog open when pressing the
power button, but there is something else which powers down the laptop
even without interacting with the dialog after a couple of seconds.
I remember having the low-battery dialog appear, but i don't know if it
was before or after the switch to lenny, but it has been broken since
some weeks now.
I attach a log containing both the dmesg output as well as the lspci
info.
Friendly,
Sven Luther
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-vserver-powerpc64
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
LSPCI OUTPUT
===========
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
09:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
09:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
09:04.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
09:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
DMESG OUTPUT
============
Linux version 2.6.24-1-686 (Debian 2.6.24-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 14:37:45 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6ba0
Entering add_active_range(0, 0, 259712) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259712
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 259712
On node 0 totalpages: 259712
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 237 pages used for memmap
HighMem zone: 30099 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F6AD0, 0024 (r2 PTLTD )
ACPI: XSDT 3F688A2E, 007C (r1 Sony VAIO 6040000 PTL 0)
ACPI: FACP 3F68FBF8, 00F4 (r3 Sony VAIO 20070711 PTL 1)
ACPI: DSDT 3F689A83, 60F1 (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: FACS 3F690FC0, 0040
ACPI: APIC 3F68FCEC, 0068 (r1 Sony VAIO 20070711 PTL 5A)
ACPI: HPET 3F68FD54, 0038 (r1 Sony VAIO 20070711 PTL 5A)
ACPI: MCFG 3F68FD8C, 003C (r1 Sony VAIO 20070711 PTL 5A)
ACPI: TCPA 3F68FDC8, 0032 (r1 Sony VAIO 20070711 PTL 5A52)
ACPI: SLIC 3F68FDFA, 0176 (r1 Sony VAIO 20070711 PTL 1000000)
ACPI: APIC 3F68FF70, 0068 (r1 Sony VAIO 20070711 PTL 0)
ACPI: BOOT 3F68FFD8, 0028 (r1 Sony VAIO 20070711 PTL 1)
ACPI: SSDT 3F689036, 025F (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: SSDT 3F688F90, 00A6 (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: SSDT 3F688AAA, 04E6 (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [EMAIL PROTECTED]
ACPI: DMI detected: Sony
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257683
Kernel command line: root=/dev/mapper/tael-root ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1064.057 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1019852k/1038848k available (1786k kernel code, 18300k reserved, 714k data, 248k init, 121344k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0377000 - 0xc03b5000 ( 248 kB)
.data : 0xc02be915 - 0xc0371384 ( 714 kB)
.text : 0xc0100000 - 0xc02be915 (1786 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet clockevent registered
Calibrating delay using timer specific routine.. 2131.21 BogoMIPS (lpj=4262437)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2128.09 BogoMIPS (lpj=4256187)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz stepping 02
Total of 2 processors activated (4259.31 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=10
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify [EMAIL PROTECTED]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:06: ioport range 0x680-0x6ff has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe01 has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: f6000000-f7ffffff
PREFETCH window: f0000000-f1ffffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: fc000000-fc0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: f8000000-f9ffffff
PREFETCH window: f2000000-f3ffffff
PCI: Bridge: 0000:00:1c.3
IO window: 4000-4fff
MEM window: fa000000-fbffffff
PREFETCH window: f4000000-f5ffffff
PCI: Bus 10, cardbus bridge: 0000:09:04.0
IO window: 00001400-000014ff
IO window: 00001c00-00001cff
PREFETCH window: 50000000-53ffffff
MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: fc100000-fc1fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:09:04.0 to 64
NET: Registered protocol family 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6204k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1206692489.744:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: SSDT 3F689807, 01B4 (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: SSDT 3F689295, 04ED (r1 Sony VAIO 20070711 PTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F6899BB, 00C8 (r1 Sony VAIO 20070711 PTL 20050624)
ACPI: SSDT 3F689782, 0085 (r1 Sony VAIO 20070711 PTL 20050624)
Marking TSC unstable due to: TSC halts in idle.
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [ATF0] (28 C)
ACPI: Thermal Zone [DTS0] (21 C)
ACPI: Thermal Zone [DTS1] (19 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xfc544000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Clocksource tsc unstable (delta = -155150038 ns)
ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI version 1.0
ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 23
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ICH7: IDE port disabled
Probing IDE interface ide0...
usb 5-5: new high speed USB device using ehci_hcd and address 2
firewire_core: created new fw device fw0 (0 config rom retries, S400)
usb 5-5: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb 5-6: new high speed USB device using ehci_hcd and address 3
usb 5-6: configuration #1 chosen from 1 choice
hub 5-6:1.0: USB hub found
hub 5-6:1.0: 3 ports detected
hda: TOSHIBA MK1011GAH, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 3.00 loaded.
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
usb 5-8: new high speed USB device using ehci_hcd and address 4
usb 5-8: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-6.2: new full speed USB device using ehci_hcd and address 5
usb 5-6.2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED]
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb-storage: device scan complete
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.31 PQ: 0 ANSI: 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Linux agpgart interface v0.102
sr 0:0:0:0: Attached scsi generic sg0 type 5
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.20 addr 0xf6000000 irq 16 Yukon-EC Ultra (0xb4) rev 3
sky2 eth0: addr 00:1a:80:55:98:f8
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Video Bus as /class/input/input3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
sony-laptop: Sony Programmable IO Control Driver v0.5.
sony-laptop: detected Type3 model
input: Sony Vaio Keys as /class/input/input4
input: Sony Vaio Jogdial as /class/input/input5
ACPI: Battery Slot [BAT1] (battery present)
sony-laptop: Sony Notebook Control Driver v0.5.
ACPI: AC Adapter [ACAD] (off-line)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
udev: renamed network interface eth0 to eth1
input: PC Speaker as /class/input/input6
intel_rng: FWH not detected
ricoh-mmc: Ricoh MMC controller found at 0000:09:04.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
Real Time Clock Driver v1.12ac
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
Yenta: CardBus bridge found at 0000:09:04.0 [104d:900e]
Yenta: ISA IRQ mask 0x04b8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
udev: renamed network interface wmaster0 to eth2
input: PS/2 Mouse as /class/input/input7
input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on dm-1, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/tael-swap. Priority:-1 extents:1 across:2097144k
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
sonypi: Sony Programmable I/O Controller Driver v1.26.
sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
sonypi: device allocated minor is 62
input: Sony Vaio Jogdial as /class/input/input9
input: Sony Vaio Keys as /class/input/input10
sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 652)
sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 663)
sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 665)
sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 652)
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 1-2: new low speed USB device using uhci_hcd and address 2
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
usb 1-2: configuration #1 chosen from 1 choice
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Trackball as /class/input/input11
input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
sky2 eth1: enabling interface
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
vmmon: module license 'unspecified' taints kernel.
[4034]: VMCI: Driver initialized.
[4034]: Module vmmon: registered with major=10 minor=165
[4034]: Module vmmon: initialized
/dev/vmnet: open called by PID 4086 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 4102 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
/dev/vmnet: open called by PID 4101 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4164 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4196 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4264 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: reset low speed USB device using uhci_hcd and address 2
vmnet1: no IPv6 routers present
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/all, error -71
vmnet8: no IPv6 routers present
usb 1-2: reset low speed USB device using uhci_hcd and address 2
eth1: no IPv6 routers present
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: reset low speed USB device using uhci_hcd and address 2
usb 1-2: failed to restore interface 0 altsetting 0 (error=-71)
usb 1-2: USB disconnect, address 2
usb 1-2: new low speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Trackball as /class/input/input12
input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.0-2
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
usb 1-2: reset low speed USB device using uhci_hcd and address 3
sky2 eth1: rx error, status 0xa20002 length 162
sky2 eth1: rx error, status 0xa20020 length 162
sky2 eth1: rx error, status 0xa20020 length 162
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0020 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0xa20002 length 162
sky2 eth1: rx error, status 0xa20002 length 162
sky2 eth1: rx error, status 0x2a40002 length 676
sky2 eth1: rx error, status 0xa20002 length 162
sky2 eth1: rx error, status 0x59a0002 length 1434
sky2 eth1: rx error, status 0x59a0002 length 1434
