Package: wodim Version: 9:1.1.9-1 Severity: grave Justification: renders package unusable
The first error: "Cannot load media" happens when wodim is invoked as a regular user that is a member of the cdrom group, so permissions should not be a problem. The second error: "Cannot init drive" happens when wodim is invoked as root. Using or not using the -dummy option doesn't make a difference. The hardware: Philips CDD2600 CD burner connected to an Adaptec 1542CF SCSI controller. All the devices are recognized correctly. Inserting a good data CD in the drive generates the event and the contents can be opened in a new window. First, here's the output of the regular user invocation: > wodim -v dev=/dev/scd0 -dummy debian-testing-i386-netinst.iso wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'PHILIPS ' Identification : 'CDD2600 ' Revision : '1.07' Device seems to be: Philips CDD-2600. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 12582912 = 12288 KB Track 01: data 148 MB Total size: 171 MB (16:57.05) = 76279 sectors Lout start: 171 MB (16:59/04) = 76279 sectors wodim: Cannot load media. The invocation as root: # wodim -v dev=/dev/scd0 -dummy debian-testing-i386-netinst.iso wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'PHILIPS ' Identification : 'CDD2600 ' Revision : '1.07' Device seems to be: Philips CDD-2600. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 12582912 = 12288 KB Track 01: data 148 MB Total size: 171 MB (16:57.05) = 76279 sectors Lout start: 171 MB (16:59/04) = 76279 sectors Current Secsize: 2048 ATIP info from disk: Is not unrestricted Disk application code: 0 ATIP start of lead in: -11849 (97:24/01) ATIP start of lead out: 359847 (79:59/72) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 25 Manufacturer: Taiyo Yuden Company Limited wodim: Warning: controller returns zero sized Speed/Dummy information page. wodim: Warning: controller returns wrong size for Speed/Dummy information page. wodim: Warning: controller returns wrong page 0 for Speed/Dummy information page (23). wodim: Cannot init drive. The relevant parts of dmesg: SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods Configuring Adaptec (SCSI-ID 7) at IO:134, IRQ 10, DMA priority 5 scsi0 : Adaptec 1542 isa bounce pool size: 16 pages scsi 0:0:1:0: Processor HP C1750A 3125 PQ: 0 ANSI: 1 scsi 0:0:1:0: Attached scsi generic sg0 type 3 scsi 0:0:4:0: Sequential-Access ARCHIVE Python 25501-XXX 2.50 PQ: 0 ANSI: 2 scsi 0:0:4:0: Attached scsi generic sg1 type 1 st: Version 20080224, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods st 0:0:4:0: Attached scsi tape st0 st 0:0:4:0: st0: try direct i/o: no (alignment 4 B) scsi 0:0:6:0: CD-ROM PHILIPS CDD2600 1.07 PQ: 0 ANSI: 2 scsi 0:0:6:0: Attached scsi generic sg2 type 5 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ Driver 'osst' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:6:0: Attached scsi CD-ROM sr0 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.261 (PREEMPT) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages wodim depends on: ii libc6 2.7-16 GNU C Library: Shared libraries ii libcap2 2.11-2 support for getting/setting POSIX. Versions of packages wodim recommends: ii genisoimage 9:1.1.9-1 Creates ISO-9660 CD-ROM filesystem Versions of packages wodim suggests: pn cdrkit-doc <none> (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
