Robert Millan wrote: > On Wed, Jan 13, 2010 at 08:43:18AM -0600, Jonathan Nieder wrote:
>> Version 1.98~experimental.20091229-1 is similar: though the boot menu >> looks like text mode, when Linux boots, it is garbled and I cannot >> make out anything until I start X. > > Please could each of you attach your dmesg? Three files are attached: 1. dmesg.bad-grub.txt: dmesg after boot with grub-pc 1.98~experimental.20100111.1-1 2. good-bad-diff.txt: diff -u between boot with grub from sid and grub from experimental. Most importantly, we find -[ 0.000000] Console: colour VGA+ 80x25 +[ 0.000000] Console: colour dummy device 80x25 3. kconfig.txt.xz: compressed .config for this kernel $ egrep 'VGA|CON(SOLE|_)' /boot/config-2.6.33-rc3-next-20100113-03029-ge0ba2ee # CONFIG_NETCONSOLE is not set CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_FIX_EARLYCON_MEM=y CONFIG_VGA_ARB=y # CONFIG_VGASTATE is not set CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SISUSBVGA is not set Hope that helps, Jonathan
[ 0.000000] Linux version 2.6.33-rc3-next-20100113-03029-ge0ba2ee (j...@progeny) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #6 PREEMPT Wed Jan 13 07:28:51 CST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000bfdb000 (usable) [ 0.000000] BIOS-e820: 000000000bfdb000 - 000000000c000000 (reserved) [ 0.000000] BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xbfdb max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF8000000 write-back [ 0.000000] 1 base 008000000 mask FFC000000 write-back [ 0.000000] 2 base 0100A0000 mask FFFFE0000 write-through [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000bfdb000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 000be00000 page 2M [ 0.000000] 000be00000 - 000bfdb000 page 4k [ 0.000000] kernel direct mapping tables up to bfdb000 @ 7000-d000 [ 0.000000] RAMDISK: 08eba000 - 090237c8 [ 0.000000] ACPI: RSDP 000f4c80 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 0bff0000 0002C (v01 DELL CPi R 27D20B07 ASL 00000061) [ 0.000000] ACPI: FACP 0bff0400 00074 (v01 DELL CPi R 27D20B07 ASL 00000061) [ 0.000000] ACPI: DSDT 0bff0800 02ACA (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0bfff800 00040 [ 0.000000] ACPI: BOOT 0bff07c0 00028 (v01 DELL CPi R 27D20B07 ASL 00000061) [ 0.000000] 191MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0bfdb000 [ 0.000000] low ram: 0 - 0bfdb000 [ 0.000000] node 0 low ram: 00000000 - 0bfdb000 [ 0.000000] node 0 bootmap 00005000 - 000067fc [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 000bfdb000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 0000953b2c] TEXT DATA BSS ==> [0000100000 - 0000953b2c] [ 0.000000] #2 [0008eba000 - 00090237c8] RAMDISK ==> [0008eba000 - 00090237c8] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000954000 - 000095b198] BRK ==> [0000954000 - 000095b198] [ 0.000000] #5 [0000001000 - 0000005000] ACPI WAKEUP ==> [0000001000 - 0000005000] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000005000 - 0000007000] BOOTMAP ==> [0000005000 - 0000007000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000bfdb [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000bfdb [ 0.000000] On node 0 totalpages: 49018 [ 0.000000] free_area_init_node: node 0, pgdat c0421038, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 352 pages used for memmap [ 0.000000] Normal zone: 44667 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Allocating PCI resources starting at 10100000 (gap: 10100000:efd00000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48634 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-rc3-next-20100113-03029-ge0ba2ee root=UUID=3b48df60-83e0-4fd2-a152-22b942ab5599 ro quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 184292k/196460k available (2042k kernel code, 11776k reserved, 1167k data, 248k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) [ 0.000000] vmalloc : 0xcc7db000 - 0xfffe2000 ( 824 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcbfdb000 ( 191 MB) [ 0.000000] .init : 0xc0423000 - 0xc0461000 ( 248 kB) [ 0.000000] .data : 0xc02febe1 - 0xc0422984 (1167 kB) [ 0.000000] .text : 0xc0100000 - 0xc02febe1 (2042 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 [ 0.000000] CPU 0 irqstacks, hard=c03f8000 soft=c03f9000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 601.363 MHz processor. [ 0.000111] Calibrating delay loop (skipped), value calculated using timer frequency.. 1202.72 BogoMIPS (lpj=6013630) [ 0.000270] Mount-cache hash table entries: 512 [ 0.011459] mce: CPU supports 5 MCE banks [ 0.011515] Performance Events: [ 0.011526] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.011536] no hardware sampling interrupt available. [ 0.011545] p6 PMU driver. [ 0.011582] ... version: 0 [ 0.011591] ... bit width: 32 [ 0.011599] ... generic registers: 2 [ 0.011608] ... value mask: 00000000ffffffff [ 0.011618] ... max period: 000000007fffffff [ 0.011627] ... fixed-purpose events: 0 [ 0.011635] ... event mask: 0000000000000003 [ 0.011643] CPU: Intel Celeron (Coppermine) stepping 06 [ 0.011672] Checking 'hlt' instruction... OK. [ 0.050644] ACPI: Core revision 20091214 [ 0.065942] ACPI: setting ELCR to 0200 (from 0820) [ 0.070130] devtmpfs: initialized [ 0.074653] NET: Registered protocol family 16 [ 0.078347] ACPI: bus type pci registered [ 0.083669] PCI: PCI BIOS revision 2.10 entry at 0xfc13e, last bus=1 [ 0.083683] PCI: Using configuration type 1 for base access [ 0.108852] bio: create slab <bio-0> at 0 [ 0.118382] ACPI: EC: Look up EC in DSDT [ 0.171401] ACPI: Interpreter enabled [ 0.171447] ACPI: (supports S0 S1 S3 S5) [ 0.171707] ACPI: Using PIC for interrupt routing [ 0.276062] ACPI: Power Resource [PADA] (on) [ 0.286524] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.306533] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.307421] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.346802] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.346820] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.346835] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.346849] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000effff] (ignored) [ 0.346864] pci_root PNP0A03:00: host bridge window [mem 0x0c000000-0x1009ffff] (ignored) [ 0.346878] pci_root PNP0A03:00: host bridge window [mem 0x10100000-0xffdfffff] (ignored) [ 0.347098] pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref] [ 0.347532] pci 0000:00:03.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.347598] pci 0000:00:03.0: supports D1 D2 [ 0.347610] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.347630] pci 0000:00:03.0: PME# disabled [ 0.347729] pci 0000:00:03.1: reg 10: [mem 0x00000000-0x00000fff] [ 0.347794] pci 0000:00:03.1: supports D1 D2 [ 0.347805] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.347824] pci 0000:00:03.1: PME# disabled [ 0.348151] pci 0000:00:07.1: reg 20: [io 0x0860-0x086f] [ 0.348331] pci 0000:00:07.2: reg 20: [io 0xdce0-0xdcff] [ 0.348568] pci 0000:00:07.3: quirk: [io 0x0800-0x083f] claimed by PIIX4 ACPI [ 0.348590] pci 0000:00:07.3: quirk: [io 0x0840-0x084f] claimed by PIIX4 SMB [ 0.348611] pci 0000:00:07.3: PIIX4 devres B PIO at 00e0-00e7 [ 0.348627] pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f [ 0.348644] pci 0000:00:07.3: PIIX4 devres G PIO at 0290-0297 [ 0.348776] pci 0000:00:08.0: reg 10: [io 0xd800-0xd8ff] [ 0.348806] pci 0000:00:08.0: reg 14: [mem 0xf3ffe000-0xf3ffffff] [ 0.348937] pci 0000:00:08.0: supports D1 D2 [ 0.348949] pci 0000:00:08.0: PME# supported from D1 D2 D3hot [ 0.348967] pci 0000:00:08.0: PME# disabled [ 0.349224] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.349253] pci 0000:01:00.0: reg 14: [io 0xec00-0xecff] [ 0.349281] pci 0000:01:00.0: reg 18: [mem 0xfdffc000-0xfdffffff] [ 0.349347] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.349431] pci 0000:01:00.0: supports D1 D2 [ 0.349602] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.349622] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.349642] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeffffff] [ 0.349662] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 0.349916] pci_bus 0000:00: on NUMA node 0 [ 0.349950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.350764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.450950] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.451687] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.452287] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 0.453009] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.456708] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.456733] vgaarb: loaded [ 0.458264] SCSI subsystem initialized [ 0.458576] libata version 3.00 loaded. [ 0.460805] PCI: Using ACPI for IRQ routing [ 0.460828] PCI: pci_cache_line_size set to 32 bytes [ 0.465421] cfg80211: Calling CRDA to update world regulatory domain [ 0.467000] Switching to clocksource tsc [ 0.467847] pnp: PnP ACPI init [ 0.468001] ACPI: bus type pnp registered [ 0.501635] pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f] [ 0.501657] pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f] [ 0.502622] pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f] [ 0.502644] pnp 00:03: disabling [io 0x0810-0x083f] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f] [ 0.649550] pnp: PnP ACPI: found 16 devices [ 0.649566] ACPI: ACPI bus type pnp unregistered [ 0.649682] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved [ 0.649704] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved [ 0.649724] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.649744] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.649763] system 00:00: [mem 0x00100000-0x0bfeffff] could not be reserved [ 0.649781] system 00:00: [mem 0x0bff0000-0x0bffffff] has been reserved [ 0.649800] system 00:00: [mem 0x100a0000-0x100fffff] has been reserved [ 0.649819] system 00:00: [mem 0xffe00000-0xffffffff] has been reserved [ 0.649886] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.649905] system 00:02: [io 0x0854-0x0855] has been reserved [ 0.649963] system 00:03: [io 0x0850-0x0853] has been reserved [ 0.649982] system 00:03: [io 0x0856-0x085f] has been reserved [ 0.650000] system 00:03: [io 0x0840-0x084f] has been reserved [ 0.650017] system 00:03: [io 0x0600-0x067f] has been reserved [ 0.650035] system 00:03: [io 0x0680-0x06ff] has been reserved [ 0.650093] system 00:04: [io 0xf000-0xf0fe] has been reserved [ 0.650112] system 00:04: [io 0xf100-0xf1fe] has been reserved [ 0.650130] system 00:04: [io 0xf200-0xf2fe] has been reserved [ 0.650147] system 00:04: [io 0xf400-0xf4fe] has been reserved [ 0.650165] system 00:04: [io 0xf500-0xf5fe] has been reserved [ 0.650183] system 00:04: [io 0xf600-0xf6fe] has been reserved [ 0.650200] system 00:04: [io 0xf800-0xf8fe] has been reserved [ 0.650218] system 00:04: [io 0xf900-0xf9fe] has been reserved [ 0.650236] system 00:04: [io 0xfa00-0xfafe] has been reserved [ 0.650254] system 00:04: [io 0xfc00-0xfcfe] has been reserved [ 0.650271] system 00:04: [io 0xfd00-0xfdfe] has been reserved [ 0.650289] system 00:04: [io 0xfe00-0xfefe] has been reserved [ 0.650307] system 00:04: [mem 0xed000000-0xedffffff] has been reserved [ 0.650375] system 00:09: [io 0x03f0-0x03f1] has been reserved [ 0.690283] pci 0000:00:03.0: BAR 9: assigned [mem 0x14000000-0x17ffffff pref] [ 0.690307] pci 0000:00:03.0: BAR 10: assigned [mem 0x18000000-0x1bffffff] [ 0.690327] pci 0000:00:03.1: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref] [ 0.690346] pci 0000:00:03.1: BAR 10: assigned [mem 0x20000000-0x23ffffff] [ 0.690365] pci 0000:00:03.0: BAR 0: assigned [mem 0x10100000-0x10100fff] [ 0.690392] pci 0000:00:03.0: BAR 0: set to [mem 0x10100000-0x10100fff] (PCI address [0x10100000-0x10100fff] [ 0.690413] pci 0000:00:03.1: BAR 0: assigned [mem 0x10101000-0x10101fff] [ 0.690437] pci 0000:00:03.1: BAR 0: set to [mem 0x10101000-0x10101fff] (PCI address [0x10101000-0x10101fff] [ 0.690463] pci 0000:00:03.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.690484] pci 0000:00:03.0: BAR 8: assigned [io 0x1400-0x14ff] [ 0.690504] pci 0000:00:03.1: BAR 7: assigned [io 0x1800-0x18ff] [ 0.690524] pci 0000:00:03.1: BAR 8: assigned [io 0x1c00-0x1cff] [ 0.690547] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.690561] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.690578] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.690602] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeffffff] [ 0.690624] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 0.690650] pci 0000:00:03.0: CardBus bridge to [bus 02-05] [ 0.690663] pci 0000:00:03.0: bridge window [io 0x1000-0x10ff] [ 0.690683] pci 0000:00:03.0: bridge window [io 0x1400-0x14ff] [ 0.690704] pci 0000:00:03.0: bridge window [mem 0x14000000-0x17ffffff pref] [ 0.690725] pci 0000:00:03.0: bridge window [mem 0x18000000-0x1bffffff] [ 0.690744] pci 0000:00:03.1: CardBus bridge to [bus 06-09] [ 0.690757] pci 0000:00:03.1: bridge window [io 0x1800-0x18ff] [ 0.690776] pci 0000:00:03.1: bridge window [io 0x1c00-0x1cff] [ 0.690797] pci 0000:00:03.1: bridge window [mem 0x1c000000-0x1fffffff pref] [ 0.690818] pci 0000:00:03.1: bridge window [mem 0x20000000-0x23ffffff] [ 0.690882] pci 0000:00:03.0: enabling device (0000 -> 0003) [ 0.692058] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.692074] PCI: setting IRQ 11 as level-triggered [ 0.692091] pci 0000:00:03.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.692143] pci 0000:00:03.1: enabling device (0000 -> 0003) [ 0.692174] pci 0000:00:03.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.692205] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.692220] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.692234] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.692248] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeffffff] [ 0.692261] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] [ 0.692276] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff] [ 0.692288] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff] [ 0.692302] pci_bus 0000:02: resource 2 [mem 0x14000000-0x17ffffff pref] [ 0.692315] pci_bus 0000:02: resource 3 [mem 0x18000000-0x1bffffff] [ 0.692329] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff] [ 0.692341] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff] [ 0.692354] pci_bus 0000:06: resource 2 [mem 0x1c000000-0x1fffffff pref] [ 0.692368] pci_bus 0000:06: resource 3 [mem 0x20000000-0x23ffffff] [ 0.692503] NET: Registered protocol family 2 [ 0.692908] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.693938] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.694248] TCP bind hash table entries: 8192 (order: 6, 262144 bytes) [ 0.697386] TCP: Hash tables configured (established 8192 bind 8192) [ 0.697523] TCP reno registered [ 0.697566] UDP hash table entries: 128 (order: 1, 10240 bytes) [ 0.697803] UDP-Lite hash table entries: 128 (order: 1, 10240 bytes) [ 0.698419] NET: Registered protocol family 1 [ 0.698491] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.698662] pci 0000:01:00.0: Boot video device [ 0.698684] PCI: CLS 32 bytes, default 32 [ 0.699389] Unpacking initramfs... [ 2.048367] Freeing initrd memory: 1445k freed [ 2.057389] Simple Boot Flag at 0x79 set to 0x1 [ 2.062176] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.100732] msgmni has been set to 362 [ 2.104160] alg: No test for stdrng (krng) [ 2.104745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.104867] io scheduler noop registered [ 2.105572] io scheduler cfq registered (default) [ 2.148113] ata_piix 0000:00:07.1: version 2.13 [ 2.149090] scsi0 : ata_piix [ 2.151992] scsi1 : ata_piix [ 2.152925] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x860 irq 14 [ 2.152941] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x868 irq 15 [ 2.156361] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.165012] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.165167] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.168694] mice: PS/2 mouse device common for all mice [ 2.172887] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.172965] rtc0: alarms up to one day, 114 bytes nvram [ 2.173545] cpuidle: using governor ladder [ 2.173564] cpuidle: using governor menu [ 2.173618] TCP cubic registered [ 2.177155] rtc_cmos 00:07: setting system clock to 2010-01-20 05:38:57 UTC (1263965937) [ 2.180252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.330893] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 [ 2.330910] ata1.00: 117210240 sectors, multi 8: LBA48 [ 2.370640] ata1.00: configured for UDMA/33 [ 2.373024] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 2.380373] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 2.380855] sd 0:0:0:0: [sda] Write Protect is off [ 2.380872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.381072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.384488] sda: sda1 sda2 < [ 2.430336] ata2.01: NODEV after polling detection [ 2.440911] sda5 > [ 2.445830] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.450498] ata2.00: ATAPI: SAMSUNG CD-ROM SN-124, q008, max UDMA/33, CDB intr [ 2.490387] ata2.00: configured for UDMA/33 [ 2.492163] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SN-124 q008 PQ: 0 ANSI: 5 [ 2.494560] Freeing unused kernel memory: 248k freed [ 2.496361] Write protecting the kernel text: 2044k [ 2.496702] Write protecting the kernel read-only data: 984k [ 2.893369] Synaptics Touchpad, model: 1, fw: 5.5, id: 0x9b58b1, caps: 0x804793/0x0 [ 2.893397] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.946318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 4.529119] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 6.638604] udev: starting version 150 [ 7.411427] ACPI: AC Adapter [AC] (on-line) [ 7.814053] Marking TSC unstable due to TSC halts in idle [ 7.854123] Switching to clocksource acpi_pm [ 7.929010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 7.963788] ACPI: Lid Switch [LID] [ 7.964335] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 8.018293] ACPI: Power Button [PBTN] [ 8.365905] Linux agpgart interface v0.103 [ 8.543918] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.556412] yenta_cardbus 0000:00:03.0: CardBus bridge found [1028:00b0] [ 8.556472] yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI [ 8.556484] yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI [ 8.556505] yenta_cardbus 0000:00:03.0: TI: mfunc 0x01261222, devctl 0x64 [ 8.734456] thermal LNXTHERM:01: registered as thermal_zone0 [ 8.734542] ACPI: Thermal Zone [THM] (64 C) [ 9.008628] ACPI: Battery Slot [BAT0] (battery present) [ 9.009184] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 9.009736] ACPI: Sleep Button [SBTN] [ 9.053801] ACPI: Battery Slot [BAT1] (battery absent) [ 9.189642] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 9.189658] Uniform CD-ROM driver Revision: 3.20 [ 9.190808] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x04f8, PCI irq 11 [ 9.190823] yenta_cardbus 0000:00:03.0: Socket status: 30000020 [ 9.193416] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.203487] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 9.217370] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000 [ 9.217508] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x840, revision 0 [ 9.218744] yenta_cardbus 0000:00:03.1: CardBus bridge found [1028:00b0] [ 9.218804] yenta_cardbus 0000:00:03.1: Using CSCINT to route CSC interrupts to PCI [ 9.218816] yenta_cardbus 0000:00:03.1: Routing CardBus interrupts to PCI [ 9.218837] yenta_cardbus 0000:00:03.1: TI: mfunc 0x01261222, devctl 0x64 [ 9.311320] usbcore: registered new interface driver usbfs [ 9.312798] usbcore: registered new interface driver hub [ 9.314215] usbcore: registered new device driver usb [ 9.460878] yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x04f8, PCI irq 11 [ 9.460894] yenta_cardbus 0000:00:03.1: Socket status: 30000006 [ 9.483998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.600709] uhci_hcd: USB Universal Host Controller Interface driver [ 9.601503] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 9.601550] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 9.602258] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 9.602350] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 [ 9.609872] hub 1-0:1.0: USB hub found [ 9.610287] hub 1-0:1.0: 2 ports detected [ 9.803389] IBM TrackPoint firmware: 0x0b, buttons: 2/3 [ 9.851985] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 9.852186] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 9.852511] pci 0000:02:00.0: BAR 0: assigned [mem 0x18000000-0x1800ffff] [ 9.852540] pci 0000:02:00.0: BAR 0: set to [mem 0x18000000-0x1800ffff] (PCI address [0x18000000-0x1800ffff] [ 9.862735] ath5k 0000:02:00.0: enabling device (0000 -> 0002) [ 9.862943] ath5k 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 9.863495] ath5k 0000:02:00.0: registered as 'phy0' [ 9.974861] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 9.974879] PCI: setting IRQ 5 as level-triggered [ 9.974896] Maestro3 0000:00:08.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 9.974924] Maestro3 0000:00:08.0: firmware: requesting ess/maestro3_assp_kernel.fw [ 10.077193] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5 [ 10.143975] Maestro3 0000:00:08.0: firmware: requesting ess/maestro3_assp_minisrc.fw [ 10.549593] ath: EEPROM regdomain: 0x60 [ 10.549608] ath: EEPROM indicates we should expect a direct regpair map [ 10.549626] ath: Country alpha2 being used: 00 [ 10.549635] ath: Regpair used: 0x60 [ 10.567970] phy0: Selected rate control algorithm 'minstrel' [ 10.574962] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 10.574982] ath5k phy0: RF5112B multiband radio found (0x36) [ 12.055037] Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1 across:1461872k [ 12.769994] loop: module loaded [ 15.701971] NET: Registered protocol family 17 [ 19.852387] wlan0: direct probe to 00:16:b6:c7:42:de (try 1) [ 19.855213] wlan0: direct probe responded [ 19.855484] wlan0: authenticate with 00:16:b6:c7:42:de (try 1) [ 19.857776] wlan0: authenticated [ 19.858707] wlan0: associate with 00:16:b6:c7:42:de (try 1) [ 19.860937] wlan0: RX AssocResp from 00:16:b6:c7:42:de (capab=0x411 status=0 aid=3) [ 19.860955] wlan0: associated
diff --git a/dmesg.normal.notimes b/dmesg.bad-grub.notimes index d9e34f7..4686148 100644 --- a/dmesg.normal.notimes +++ b/dmesg.bad-grub.notimes @@ -32,7 +32,7 @@ init_memory_mapping: 0000000000000000-000000000bfdb000 0000200000 - 000be00000 page 2M 000be00000 - 000bfdb000 page 4k kernel direct mapping tables up to bfdb000 @ 7000-d000 -RAMDISK: 08eba000 - 090237aa +RAMDISK: 08eba000 - 090237c8 ACPI: RSDP 000f4c80 00014 (v00 DELL ) ACPI: RSDT 0bff0000 0002C (v01 DELL CPi R 27D20B07 ASL 00000061) ACPI: FACP 0bff0400 00074 (v01 DELL CPi R 27D20B07 ASL 00000061) @@ -47,7 +47,7 @@ ACPI: BOOT 0bff07c0 00028 (v01 DELL CPi R 27D20B07 ASL 00000061) (8 early reservations) ==> bootmem [0000000000 - 000bfdb000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 0000953b2c] TEXT DATA BSS ==> [0000100000 - 0000953b2c] - #2 [0008eba000 - 00090237aa] RAMDISK ==> [0008eba000 - 00090237aa] + #2 [0008eba000 - 00090237c8] RAMDISK ==> [0008eba000 - 00090237c8] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000954000 - 000095b198] BRK ==> [0000954000 - 000095b198] #5 [0000001000 - 0000005000] ACPI WAKEUP ==> [0000001000 - 0000005000] @@ -90,7 +90,7 @@ SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16 CPU 0 irqstacks, hard=c03f8000 soft=c03f9000 -Console: colour VGA+ 80x25 +Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 @@ -305,7 +305,7 @@ rtc0: alarms up to one day, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered -rtc_cmos 00:07: setting system clock to 2010-01-20 03:12:41 UTC (1263957161) +rtc_cmos 00:07: setting system clock to 2010-01-20 05:38:57 UTC (1263965937) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100 ata1.00: 117210240 sectors, multi 8: LBA48 @@ -331,10 +331,12 @@ input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 EXT4-fs (sda1): mounted filesystem with ordered data mode udev: starting version 150 ACPI: AC Adapter [AC] (on-line) -input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 Marking TSC unstable due to TSC halts in idle -ACPI: Lid Switch [LID] Switching to clocksource acpi_pm +input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 +ACPI: Lid Switch [LID] +input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 +ACPI: Power Button [PBTN] Linux agpgart interface v0.103 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) yenta_cardbus 0000:00:03.0: CardBus bridge found [1028:00b0] @@ -342,15 +344,16 @@ yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:03.0: TI: mfunc 0x01261222, devctl 0x64 thermal LNXTHERM:01: registered as thermal_zone0 -ACPI: Thermal Zone [THM] (32 C) +ACPI: Thermal Zone [THM] (64 C) ACPI: Battery Slot [BAT0] (battery present) -input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 -ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SBTN] ACPI: Battery Slot [BAT1] (battery absent) +sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray +Uniform CD-ROM driver Revision: 3.20 yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x04f8, PCI irq 11 yenta_cardbus 0000:00:03.0: Socket status: 30000020 +sr 1:0:0:0: Attached scsi CD-ROM sr0 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000 piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x840, revision 0 @@ -361,9 +364,6 @@ yenta_cardbus 0000:00:03.1: TI: mfunc 0x01261222, devctl 0x64 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb -sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray -Uniform CD-ROM driver Revision: 3.20 -sr 1:0:0:0: Attached scsi CD-ROM sr0 yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x04f8, PCI irq 11 yenta_cardbus 0000:00:03.1: Socket status: 30000006 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver @@ -399,7 +399,6 @@ Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1 across:1461872k loop: module loaded NET: Registered protocol family 17 wlan0: direct probe to 00:16:b6:c7:42:de (try 1) -wlan0: direct probe to 00:16:b6:c7:42:de (try 1) wlan0: direct probe responded wlan0: authenticate with 00:16:b6:c7:42:de (try 1) wlan0: authenticated
kconfig.txt.xz
Description: Binary data