Package: linux-2.6
Version: 2.6.32-3
Severity: critical
File: bnx2
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-3) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sat Dec 26 17:13:29 UTC 2009
** Command line:
root=/dev/sda3 ro pci=nomsi ipv6.disable=1 quiet
** Not tainted
** Kernel log:
[ 0.971039] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.971097] usb usb1: configuration #1 chosen from 1 choice
[ 0.971117] hub 1-0:1.0: USB hub found
[ 0.971123] hub 1-0:1.0: 2 ports detected
[ 0.971161] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.971172] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.971175] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.971180] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.971200] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.975078] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 0.975085] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fc000
[ 0.990770] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.990798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.990802] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.990805] usb usb2: Product: EHCI Host Controller
[ 0.990808] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 0.990812] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.990862] usb usb2: configuration #1 chosen from 1 choice
[ 0.990880] hub 2-0:1.0: USB hub found
[ 0.990884] hub 2-0:1.0: 2 ports detected
[ 1.274264] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.274283] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.274300] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.274325] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.278255] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.282311] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.414396] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.414400] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.414462] usb 1-1: configuration #1 chosen from 1 choice
[ 1.414529] hub 1-1:1.0: USB hub found
[ 1.414635] hub 1-1:1.0: 6 ports detected
[ 1.437977] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.451297] ata4.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100, ATAPI
AN
[ 1.455775] ata4.00: configured for UDMA/100
[ 1.478294] scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A
PQ: 0 ANSI: 5
[ 1.516041] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.516045] Uniform CD-ROM driver Revision: 3.20
[ 1.516142] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.523315] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 1.525823] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.601670] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 1.601696] mptsas 0000:01:00.0: setting latency timer to 64
[ 1.657977] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.657982] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.658053] usb 2-1: configuration #1 chosen from 1 choice
[ 1.658113] hub 2-1:1.0: USB hub found
[ 1.658218] hub 2-1:1.0: 8 ports detected
[ 1.933129] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
[ 2.025218] usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
[ 2.025222] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.025290] usb 2-1.5: configuration #1 chosen from 1 choice
[ 2.025347] hub 2-1.5:1.0: USB hub found
[ 2.025455] hub 2-1.5:1.0: 4 ports detected
[ 19.876907] scsi6 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1,
MaxQ=266, IRQ=16
[ 19.910395] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy
0, sas_addr 0x1221000000000000
[ 19.913175] scsi 6:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 3B05
PQ: 0 ANSI: 5
[ 19.915066] scsi 6:0:0:0: Attached scsi generic sg1 type 0
[ 19.916716] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy
1, sas_addr 0x1221000001000000
[ 19.919430] scsi 6:0:1:0: Direct-Access ATA WDC WD2502ABYS-1 3B05
PQ: 0 ANSI: 5
[ 19.921302] scsi 6:0:1:0: Attached scsi generic sg2 type 0
[ 19.922981] mptsas: ioc0: attaching raid volume, channel 1, id 0
[ 19.923759] scsi 6:1:0:0: Direct-Access Dell VIRTUAL DISK 1028
PQ: 0 ANSI: 5
[ 19.930502] scsi 6:1:0:0: Attached scsi generic sg3 type 0
[ 19.944416] sd 6:1:0:0: [sda] 487063552 512-byte logical blocks: (249 GB/232
GiB)
[ 19.945026] sd 6:1:0:0: [sda] Write Protect is off
[ 19.945028] sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 19.945418] sd 6:1:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 19.946671] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 19.981633] sd 6:1:0:0: [sda] Attached SCSI disk
[ 20.212724] PM: Starting manual resume from disk
[ 20.245576] kjournald starting. Commit interval 5 seconds
[ 20.245587] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.993900] udevd version 125 started
[ 21.458096] Monitor-Mwait will be used to enter C-1 state
[ 21.492377] Monitor-Mwait will be used to enter C-3 state
[ 21.492441] processor LNXCPU:00: registered as cooling_device0
[ 21.546062] processor LNXCPU:01: registered as cooling_device1
[ 21.546110] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 21.546115] ACPI: Power Button [PWRF]
[ 21.619074] processor LNXCPU:02: registered as cooling_device2
[ 21.677938] processor LNXCPU:03: registered as cooling_device3
[ 21.863917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.866187] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.012638] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 22.063850] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 22.097523] Error: Driver 'pcspkr' is already registered, aborting...
[ 23.347208] Adding 9823708k swap on /dev/sda5. Priority:-1 extents:1
across:9823708k
[ 23.430862] EXT3 FS on sda3, internal journal
[ 24.388623] loop: module loaded
[ 25.860134] RPC: Registered udp transport module.
[ 25.860136] RPC: Registered tcp transport module.
[ 25.860137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.922504] Slow work thread pool: Starting up
[ 25.922674] Slow work thread pool: Ready
[ 25.922709] FS-Cache: Loaded
[ 25.945404] FS-Cache: Netfs 'nfs' registered for caching
[ 25.989909] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 27.754209] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 33.681949] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 33.701317] NFSD: starting 90-second grace period
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R210
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.3.4
board_vendor: Dell Inc.
board_name: 0M877N
board_version: A02
** Loaded modules:
Module Size Used by
nfsd 253670 13
exportfs 3170 1 nfsd
nfs 239972 0
lockd 57523 2 nfsd,nfs
fscache 29802 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33300 2 nfsd,nfs
sunrpc 161057 11 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop 11767 0
snd_pcm 60615 0
snd_timer 15502 1 snd_pcm
snd 44718 2 snd_pcm,snd_timer
soundcore 4614 1 snd
snd_page_alloc 6217 1 snd_pcm
dcdbas 5048 0
evdev 7336 0
pcspkr 1699 0
shpchp 25928 0
pci_hotplug 21171 1 shpchp
button 4618 0
processor 29479 4
ext3 106454 1
jbd 37037 1 ext3
mbcache 4970 1 ext3
sd_mod 29673 3
crc_t10dif 1276 1 sd_mod
sg 18728 0
sr_mod 12602 0
cdrom 29399 1 sr_mod
ehci_hcd 30578 0
mptsas 29092 2
ahci 31494 0
mptscsih 15832 1 mptsas
bnx2 57257 0
libata 131655 1 ahci
usbcore 121559 2 ehci_hcd
nls_base 6377 1 usbcore
mptbase 48286 2 mptsas,mptscsih
scsi_transport_sas 19849 1 mptsas
scsi_mod 121909 7
sd_mod,sg,sr_mod,mptsas,mptscsih,libata,scsi_transport_sas
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 172.16.15.140
netmask 255.255.255.0
gateway 172.16.15.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether b8:ac:6f:83:2a:67 brd ff:ff:ff:ff:ff:ff
inet 172.16.15.140/24 brd 172.16.15.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether b8:ac:6f:83:2a:68 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 9892 116 0 0 0 0 0 0 9892
116 0 0 0 0 0 0
eth0: 1241295 11756 0 0 0 0 0 0 394045
3211 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3539 total packets received
163 with invalid addresses
0 forwarded
0 incoming packets discarded
3376 incoming packets delivered
2994 requests sent out
Icmp:
1833 ICMP messages received
0 input ICMP message failed.
ICMP-Eingabehistogramm:
destination unreachable: 4
echo requests: 1829
1833 ICMP messages sent
0 ICMP messages failed
ICMP-Ausgabehistogramm:
destination unreachable: 4
echo replies: 1829
IcmpMsg:
InType3: 4
InType8: 1829
OutType0: 1829
OutType3: 4
Tcp:
13 active connections openings
6 passive connection openings
2 failed connection attempts
2 connection resets received
4 connections established
1336 segments received
961 segments send out
0 segments retransmited
0 bad segments received.
4 resets sent
Udp:
207 packets received
0 packets to unknown port received.
0 packet receive errors
200 packets sent
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
16 delayed acks sent
218 packets directly queued to recvmsg prequeue.
2896 bytes directly in process context from backlog
233840 bytes directly received in process context from prequeue
221 packet headers predicted
148 packets header predicted and directly queued to user
481 acknowledgments not containing data payload received
2 connections reset due to early user close
IpExt:
InBcastPkts: 71
OutBcastPkts: 59
InOctets: 580183
OutOctets: 330621
InBcastOctets: 12397
OutBcastOctets: 9475
*** Device features:
eth0: 0x1909b3
eth1: 0x1909b3
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Clarksfield/Lynnfield DMI
[8086:d130] (rev 11)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
Enable-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
00:03.0 PCI bridge [0604]: Intel Corporation Clarksfield/Lynnfield PCI Express
Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: df100000-df2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Dell Device [1028:02a5]
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
Enable-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x16, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 1, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:08.0 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield
System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.1 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield
Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.2 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield
System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.3 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield
Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Device [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Device [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host
Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 1
[8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: da000000-ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device [1028:02a5]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host
Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device [1028:02a5]
00:1f.0 ISA bridge [0601]: Intel Corporation Ibex Peak LPC Interface Controller
[8086:3b14] (rev 05)
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller [0106]: Intel Corporation Ibex Peak 6 port SATA AHCI
Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at ecd0 [size=8]
Region 1: I/O ports at ecc8 [size=4]
Region 2: I/O ports at ecd8 [size=8]
Region 3: I/O ports at eccc [size=4]
Region 4: I/O ports at ece0 [size=32]
Region 5: Memory at df0fe000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E
PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
Subsystem: Dell SAS 6/iR Adapter RAID Controller [1028:1f0e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at df100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: mptsas
Kernel modules: mptsas
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716
Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1
<64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <2us, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Device Serial Number 67-2a-83-fe-ff-6f-ac-b8
Capabilities: [110] Advanced Error Reporting <?>
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel <?>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716
Gigabit Ethernet [14e4:163b] (rev 20)
Subsystem: Dell Device [1028:02a5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1
<64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <2us, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Device Serial Number 68-2a-83-fe-ff-6f-ac-b8
Capabilities: [110] Advanced Error Reporting <?>
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel <?>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW
WPCM450 [Hermon] - Winbond/Nuvoton [102b:0532] (rev 0a) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:02a5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 002 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64:
false
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64:
true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64:
true
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
