2010/8/26 Toni Mueller <supp...@oeko.net>: > Package: grub-pc > Version: 1.98+20100804-2 > Severity: important > > > Hi, > > my machine is a standard PC with two SATA disks, bundled as md0 and md1, > with /boot on md0, and everything else in a LUKS encrypted container on > md1 with LVM inside. So, booting normally works by fetching the kernel > and initrd from /boot, then asking for a passphrase to unlock the > container, then proceed with the boot process. > > Yesterday, I upgraded to all the latest and greatest in Testing, which > included both new versions of grub-pc and > linux-image--2.6.32-5-686-bigmem (I have 8GB RAM in my machine) and > grub-pc presented me with a statement like "your UUIDs are garbled. I > need to regenerate them, or you'll be unable to boot.", with my two > disks selected as the default devices to regenerate UUIDs for. I > accepted, understanding that grub-pc wanted to write new MBRs to the > disks, then shut down the machine after the upgrade finished. Today, the > machine booted to the point where it would normally ask for the > passphrase, but instead, it said: > > Volume group "ev0" not found > Skipping volume group ev0 > Unable to find LVM volume ev0/root > Volume group "ev0" not found > Skipping volume group ev0 > Unable to find LVM volume ev0/swap > > After several (5?) minutes where the machine didn't do anything I was > able to see, the screen was suddenly flushed with a large number of > messages like: > > /sys/devices/virtual/block/md0 (10715) > /sys/devices/virtual/block/md1 (10716) > /sys/devices/virtual/block/md0 (10717) > /sys/devices/virtual/block/md1 (10718) > /sys/devices/virtual/block/md0 (10719) > /sys/devices/virtual/block/md1 (10720) > /sys/devices/virtual/block/md0 (10721) > Unlocking the disk /dev/md1 (md1_crypt) > Enter the passphrase: > > After entering the passphrase, the machine used several more minutes > while the cpu cooler went into high pitch, then it emitted the following > message: > > 10 logical volume(s) in volume group "ev0" now active > cryptsetup: md1_crypt set up successfully > > Then it took some more time, after which it emitted a flurry of > messages, ending with this: > > > /sys/devices/virtual/block/md0 (25598) > /sys/devices/virtual/block/md1 (25599) > /sys/devices/virtual/block/md0 (25600) > /sys/devices/virtual/block/md1 (25601)
May this be related to #583917, mdadm: long delay (6-200 minutes) during boot (root device detection) after upgrade on RAID/LVM/LUKS setup? Does downgrading to mdadm 3.1.1 help? -- Agustin -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org