--- Begin Message ---
Package: kumofs
Version: 0.4.12-3
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package failed to install. As per
definition of the release team this makes the package too buggy for a
release, thus the severity.
From the attached log (scroll to the bottom...):
Unpacking kumofs (from .../kumofs_0.4.12-3_amd64.deb) ...
Setting up kumofs (0.4.12-3) ...
chown: cannot access `/var/run/kumofs': No such file or directory
dpkg: error processing kumofs (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
kumofs
E: Sub-process /usr/bin/dpkg returned an error code (1)
I assume you just do a "mkdir /var/run/kumofs" instead of
a "mkdir -p /var/run/kumofs". Please also note that /var/run might no exist
on boot neither.
cheers,
Holger
Start: 2010-11-14 22:47:39 UTC
Package: kumofs
Priority: extra
Section: misc
Installed-Size: 1460
Maintainer: Taku YASUI <t...@debian.org>
Architecture: amd64
Version: 0.4.12-3
Depends: libc6 (>= 2.3.2), libgcc1 (>= 1:4.1.1), libmsgpack3 (>= 0.5.1), libmsgpackc2 (>= 0.5.1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0), libtokyocabinet8 (>= 1.4.14), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, ruby, libmsgpack-ruby1.8, adduser
Filename: pool/main/k/kumofs/kumofs_0.4.12-3_amd64.deb
Size: 550662
MD5sum: 207726a6605c4a66ad690f5be867d196
SHA1: e85b1ccc35ae80c973f3cf031551337845f6355d
SHA256: 429beb250be3cf0207cfef3dd8e89b2ebc653284d92bed1354918b24013220c4
Description: simple and fast distributed key-value store
Kumofs is a simple and fast distributed key-value store which can use
a memcached client library to get, set, delete, or compare-and-swap
values. Tokyo Cabinet serves as a high-performance back-end.
.
Main features of kumofs:
* data is partitioned and replicated over multiple servers;
* performance on single node systems is comparable with memcached;
* read and write performance improve when servers are added;
* servers can be added, restarted, or removed on the fly with no
configuration change;
* automatic rebalancing is supported via a consistency control
algorithm;
* it provides a safe Compare-And-Swap operation;
* the memcached protocol is supported.
.
Kumofs is used at Nico Nico Douga, the most popular video sharing
service in Japan.
Homepage: http://kumofs.sourceforge.net/
Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ kumofs
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.39~201011142118 starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ kumofs
0m0.0s INFO: Running on: Linux piatti 2.6.32.25-dsa-amd64 #1 SMP Fri Oct 29 08:43:30 UTC 2010 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpasJzUQ
0m0.0s DEBUG: Unpacking sid.tar.gz into /org/piuparts.debian.org/tmp/tmpasJzUQ
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpasJzUQ', '-zxf', 'sid.tar.gz']
0m2.0s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpasJzUQ', '-zxf', 'sid.tar.gz']
0m2.0s DEBUG: Created policy-rc.d and chmodded it.
0m2.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'update']
0m4.6s DUMP:
Get:1 http://piatti.debian.org sid Release.gpg [835 B]
Ign http://piatti.debian.org/debian/ sid/contrib Translation-en
Ign http://piatti.debian.org/debian/ sid/main Translation-en
Ign http://piatti.debian.org/debian/ sid/non-free Translation-en
Get:2 http://piatti.debian.org sid Release [104 kB]
Ign http://piatti.debian.org sid/main amd64 Packages/DiffIndex
Ign http://piatti.debian.org sid/contrib amd64 Packages/DiffIndex
Ign http://piatti.debian.org sid/non-free amd64 Packages/DiffIndex
Get:3 http://piatti.debian.org sid/main amd64 Packages [9083 kB]
Get:4 http://piatti.debian.org sid/contrib amd64 Packages [72.0 kB]
Get:5 http://piatti.debian.org sid/non-free amd64 Packages [146 kB]
Fetched 9405 kB in 1s (6694 kB/s)
Reading package lists...
0m4.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'update']
0m4.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-yf', 'upgrade']
0m9.9s DUMP:
Reading package lists...
Building dependency tree...
The following packages will be upgraded:
base-files debianutils gcc-4.4-base libgcc1 liblzma2 libstdc++6
sensible-utils tar xz-utils
9 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 1995 kB of archives.
After this operation, 618 kB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ sid/main base-files amd64 5.10 [68.6 kB]
Get:2 http://piatti.debian.org/debian/ sid/main sensible-utils all 0.0.5 [6218 B]
Get:3 http://piatti.debian.org/debian/ sid/main debianutils amd64 3.4.2 [57.1 kB]
Get:4 http://piatti.debian.org/debian/ sid/main tar amd64 1.25-2 [969 kB]
Get:5 http://piatti.debian.org/debian/ sid/main gcc-4.4-base amd64 4.4.5-7 [122 kB]
Get:6 http://piatti.debian.org/debian/ sid/main libstdc++6 amd64 4.4.5-7 [341 kB]
Get:7 http://piatti.debian.org/debian/ sid/main libgcc1 amd64 1:4.4.5-7 [45.0 kB]
Get:8 http://piatti.debian.org/debian/ sid/main liblzma2 amd64 5.0.0-2 [184 kB]
Get:9 http://piatti.debian.org/debian/ sid/main xz-utils amd64 5.0.0-2 [201 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 1995 kB in 0s (43.2 MB/s)
(Reading database ... 6114 files and directories currently installed.)
Preparing to replace base-files 5.9 (using .../base-files_5.10_amd64.deb) ...
Unpacking replacement base-files ...
Setting up base-files (5.10) ...
(Reading database ... 6114 files and directories currently installed.)
Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.5_all.deb) ...
Unpacking replacement sensible-utils ...
Setting up sensible-utils (0.0.5) ...
(Reading database ... 6117 files and directories currently installed.)
Preparing to replace debianutils 3.4.1 (using .../debianutils_3.4.2_amd64.deb) ...
Unpacking replacement debianutils ...
Setting up debianutils (3.4.2) ...
(Reading database ... 6127 files and directories currently installed.)
Preparing to replace tar 1.24-1 (using .../archives/tar_1.25-2_amd64.deb) ...
Unpacking replacement tar ...
Setting up tar (1.25-2) ...
(Reading database ... 6127 files and directories currently installed.)
Preparing to replace gcc-4.4-base 4.4.5-6 (using .../gcc-4.4-base_4.4.5-7_amd64.deb) ...
Unpacking replacement gcc-4.4-base ...
Setting up gcc-4.4-base (4.4.5-7) ...
(Reading database ... 6127 files and directories currently installed.)
Preparing to replace libstdc++6 4.4.5-6 (using .../libstdc++6_4.4.5-7_amd64.deb) ...
Unpacking replacement libstdc++6 ...
Setting up libstdc++6 (4.4.5-7) ...
(Reading database ... 6127 files and directories currently installed.)
Preparing to replace libgcc1 1:4.4.5-6 (using .../libgcc1_1%3a4.4.5-7_amd64.deb) ...
Unpacking replacement libgcc1 ...
Setting up libgcc1 (1:4.4.5-7) ...
(Reading database ... 6127 files and directories currently installed.)
Preparing to replace liblzma2 4.999.9beta+20100810-1 (using .../liblzma2_5.0.0-2_amd64.deb) ...
Unpacking replacement liblzma2 ...
Setting up liblzma2 (5.0.0-2) ...
(Reading database ... 6128 files and directories currently installed.)
Preparing to replace xz-utils 4.999.9beta+20100810-1 (using .../xz-utils_5.0.0-2_amd64.deb) ...
Unpacking replacement xz-utils ...
Setting up xz-utils (5.0.0-2) ...
0m9.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-yf', 'upgrade']
0m9.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'clean']
0m9.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'clean']
0m9.9s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpasJzUQ/tmp/scripts/
0m9.9s INFO: Running scripts post_setup
0m10.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--get-selections', '*']
0m10.6s DUMP:
apt install
base-files install
base-passwd install
bash install
bsdutils install
coreutils install
dash install
debconf install
debconf-i18n install
debian-archive-keyring install
debianutils install
diffutils install
dpkg install
e2fslibs install
e2fsprogs install
findutils install
gcc-4.4-base install
gnupg install
gpgv install
grep install
gzip install
hostname install
initscripts install
insserv install
libacl1 install
libattr1 install
libblkid1 install
libbz2-1.0 install
libc-bin install
libc6 install
libcomerr2 install
libdb4.8 install
libgcc1 install
liblocale-gettext-perl install
liblzma2 install
libncurses5 install
libpam-modules install
libpam-runtime install
libpam0g install
libreadline6 install
libselinux1 install
libsepol1 install
libslang2 install
libss2 install
libstdc++6 install
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libusb-0.1-4 install
libuuid1 install
login install
lsb-base install
mawk install
mount install
ncurses-base install
ncurses-bin install
passwd install
perl-base install
readline-common install
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tzdata install
util-linux install
xz-utils install
zlib1g install
0m10.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--get-selections', '*']
0m10.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-cache', 'show', 'kumofs']
0m10.7s DUMP:
Package: kumofs
Priority: extra
Section: misc
Installed-Size: 1460
Maintainer: Taku YASUI <t...@debian.org>
Architecture: amd64
Version: 0.4.12-3
Depends: libc6 (>= 2.3.2), libgcc1 (>= 1:4.1.1), libmsgpack3 (>= 0.5.1), libmsgpackc2 (>= 0.5.1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0), libtokyocabinet8 (>= 1.4.14), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, ruby, libmsgpack-ruby1.8, adduser
Filename: pool/main/k/kumofs/kumofs_0.4.12-3_amd64.deb
Size: 550662
MD5sum: 207726a6605c4a66ad690f5be867d196
SHA1: e85b1ccc35ae80c973f3cf031551337845f6355d
SHA256: 429beb250be3cf0207cfef3dd8e89b2ebc653284d92bed1354918b24013220c4
Description: simple and fast distributed key-value store
Kumofs is a simple and fast distributed key-value store which can use
a memcached client library to get, set, delete, or compare-and-swap
values. Tokyo Cabinet serves as a high-performance back-end.
.
Main features of kumofs:
* data is partitioned and replicated over multiple servers;
* performance on single node systems is comparable with memcached;
* read and write performance improve when servers are added;
* servers can be added, restarted, or removed on the fly with no
configuration change;
* automatic rebalancing is supported via a consistency control
algorithm;
* it provides a safe Compare-And-Swap operation;
* the memcached protocol is supported.
.
Kumofs is used at Nico Nico Douga, the most popular video sharing
service in Japan.
Homepage: http://kumofs.sourceforge.net/
0m10.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-cache', 'show', 'kumofs']
0m10.7s DEBUG: Starting command: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpL1iNnx/piuparts-depends-dummy']
0m10.7s DUMP:
dpkg-deb: building package `piuparts-depends-dummy' in `/org/piuparts.debian.org/tmp/tmpL1iNnx/piuparts-depends-dummy.deb'.
0m10.7s DEBUG: Command ok: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpL1iNnx/piuparts-depends-dummy']
0m10.7s DEBUG: Copying /org/piuparts.debian.org/tmp/tmpL1iNnx/piuparts-depends-dummy.deb to /org/piuparts.debian.org/tmp/tmpasJzUQ/tmp
0m10.7s INFO: Running scripts pre_install
0m10.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m10.9s DUMP:
Selecting previously deselected package piuparts-depends-dummy.
(Reading database ... 6131 files and directories currently installed.)
Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ...
dpkg: dependency problems prevent configuration of piuparts-depends-dummy:
piuparts-depends-dummy depends on libmsgpack3 (>= 0.5.1); however:
Package libmsgpack3 is not installed.
piuparts-depends-dummy depends on libmsgpackc2 (>= 0.5.1); however:
Package libmsgpackc2 is not installed.
piuparts-depends-dummy depends on libssl0.9.8 (>= 0.9.8m-1); however:
Package libssl0.9.8 is not installed.
piuparts-depends-dummy depends on libtokyocabinet8 (>= 1.4.14); however:
Package libtokyocabinet8 is not installed.
piuparts-depends-dummy depends on ruby; however:
Package ruby is not installed.
piuparts-depends-dummy depends on libmsgpack-ruby1.8; however:
Package libmsgpack-ruby1.8 is not installed.
piuparts-depends-dummy depends on adduser; however:
Package adduser is not installed.
dpkg: error processing piuparts-depends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
piuparts-depends-dummy
0m10.9s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb']
0m10.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-yf', '--no-remove', 'install']
0m14.7s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
Correcting dependencies... Done
The following extra packages will be installed:
adduser libgdbm3 libmsgpack-ruby1.8 libmsgpack3 libmsgpackc2 libreadline5
libruby1.8 libssl0.9.8 libtokyocabinet8 ruby ruby1.8
Suggested packages:
perl-modules ri ruby-dev ruby1.8-examples ri1.8
The following NEW packages will be installed:
adduser libgdbm3 libmsgpack-ruby1.8 libmsgpack3 libmsgpackc2 libreadline5
libruby1.8 libssl0.9.8 libtokyocabinet8 ruby ruby1.8
0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 4015 kB of archives.
After this operation, 12.9 MB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ sid/main libmsgpack3 amd64 0.5.4-1 [14.5 kB]
Get:2 http://piatti.debian.org/debian/ sid/main libmsgpackc2 amd64 0.5.4-1 [13.4 kB]
Get:3 http://piatti.debian.org/debian/ sid/main libssl0.9.8 amd64 0.9.8o-2 [945 kB]
Get:4 http://piatti.debian.org/debian/ sid/main libtokyocabinet8 amd64 1.4.37-6 [285 kB]
Get:5 http://piatti.debian.org/debian/ sid/main libgdbm3 amd64 1.8.3-9 [46.2 kB]
Get:6 http://piatti.debian.org/debian/ sid/main libreadline5 amd64 5.2-7 [146 kB]
Get:7 http://piatti.debian.org/debian/ sid/main libruby1.8 amd64 1.8.7.302-2 [2061 kB]
Get:8 http://piatti.debian.org/debian/ sid/main ruby1.8 amd64 1.8.7.302-2 [310 kB]
Get:9 http://piatti.debian.org/debian/ sid/main ruby all 4.5 [21.7 kB]
Get:10 http://piatti.debian.org/debian/ sid/main libmsgpack-ruby1.8 amd64 0.4.3-2 [12.5 kB]
Get:11 http://piatti.debian.org/debian/ sid/main adduser all 3.112+nmu1 [159 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 4015 kB in 0s (5110 kB/s)
Selecting previously deselected package libmsgpack3.
(Reading database ... 6131 files and directories currently installed.)
Unpacking libmsgpack3 (from .../libmsgpack3_0.5.4-1_amd64.deb) ...
Selecting previously deselected package libmsgpackc2.
Unpacking libmsgpackc2 (from .../libmsgpackc2_0.5.4-1_amd64.deb) ...
Selecting previously deselected package libssl0.9.8.
Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-2_amd64.deb) ...
Selecting previously deselected package libtokyocabinet8.
Unpacking libtokyocabinet8 (from .../libtokyocabinet8_1.4.37-6_amd64.deb) ...
Selecting previously deselected package libgdbm3.
Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ...
Selecting previously deselected package libreadline5.
Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ...
Selecting previously deselected package libruby1.8.
Unpacking libruby1.8 (from .../libruby1.8_1.8.7.302-2_amd64.deb) ...
Selecting previously deselected package ruby1.8.
Unpacking ruby1.8 (from .../ruby1.8_1.8.7.302-2_amd64.deb) ...
Selecting previously deselected package ruby.
Unpacking ruby (from .../apt/archives/ruby_4.5_all.deb) ...
Selecting previously deselected package libmsgpack-ruby1.8.
Unpacking libmsgpack-ruby1.8 (from .../libmsgpack-ruby1.8_0.4.3-2_amd64.deb) ...
Selecting previously deselected package adduser.
Unpacking adduser (from .../adduser_3.112+nmu1_all.deb) ...
Setting up libmsgpack3 (0.5.4-1) ...
Setting up libmsgpackc2 (0.5.4-1) ...
Setting up libssl0.9.8 (0.9.8o-2) ...
Setting up libtokyocabinet8 (1.4.37-6) ...
Setting up libgdbm3 (1.8.3-9) ...
Setting up libreadline5 (5.2-7) ...
Setting up libruby1.8 (1.8.7.302-2) ...
Setting up ruby1.8 (1.8.7.302-2) ...
Setting up ruby (4.5) ...
Setting up libmsgpack-ruby1.8 (0.4.3-2) ...
Setting up adduser (3.112+nmu1) ...
Setting up piuparts-depends-dummy (0.invalid.0) ...
0m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-yf', '--no-remove', 'install']
0m14.7s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok
0m14.7s INFO: Running scripts post_install
0m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'clean']
0m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', 'clean']
0m14.7s DEBUG: Removing /org/piuparts.debian.org/tmp/tmpasJzUQ/tmp/piuparts-depends-dummy.deb
0m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m14.7s DUMP:
(Reading database ... 6992 files and directories currently installed.)
Removing piuparts-depends-dummy ...
0m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--purge', 'piuparts-depends-dummy']
0m14.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--remove', '--pending']
0m14.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'dpkg', '--remove', '--pending']
0m15.5s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-y', 'install', 'kumofs']
0m16.7s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
kumofs
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 551 kB of archives.
After this operation, 1495 kB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ sid/main kumofs amd64 0.4.12-3 [551 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 551 kB in 0s (5257 kB/s)
Selecting previously deselected package kumofs.
(Reading database ... 6992 files and directories currently installed.)
Unpacking kumofs (from .../kumofs_0.4.12-3_amd64.deb) ...
Setting up kumofs (0.4.12-3) ...
chown: cannot access `/var/run/kumofs': No such file or directory
dpkg: error processing kumofs (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
kumofs
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m16.7s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'apt-get', '-y', 'install', 'kumofs']
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
kumofs
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 551 kB of archives.
After this operation, 1495 kB of additional disk space will be used.
Get:1 http://piatti.debian.org/debian/ sid/main kumofs amd64 0.4.12-3 [551 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 551 kB in 0s (5257 kB/s)
Selecting previously deselected package kumofs.
(Reading database ... 6992 files and directories currently installed.)
Unpacking kumofs (from .../kumofs_0.4.12-3_amd64.deb) ...
Setting up kumofs (0.4.12-3) ...
chown: cannot access `/var/run/kumofs': No such file or directory
dpkg: error processing kumofs (--configure):
subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
Errors were encountered while processing:
kumofs
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m16.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'umount', '/proc']
0m16.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpasJzUQ', 'umount', '/proc']
0m17.1s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpasJzUQ
End: 2010-11-14 22:47:56 UTC
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
