Hi Ola,
在 2005/10/3 上午 3:39 時，Ola Lundqvist 寫到：
Now I have run the entire test suite...
zircone:/srv/vservers/labradorit/root# ./testfs.sh -l -t -D /dev/
loop4 -M /mnt/t
Linux-VServer FS Test [V0.09] Copyright (C) 2005 H.Poetzl
Linux 2.4.27-mppe+ctx+vlan-686-smp i686/0.30.204
VCI: <none> (unknown)
Sorry, it's my fault again, I didn't mention all the steps.
You should make a loopback file and run losetup /dev/loop4
loopbackfile before run the testfs.sh script.
The VCI shouldn't be <none> if you have setup /dev/loop4 correctly, I
did same thing and got same errors when I forgot to setup the /dev/
loop4 after a reboot.
Here is what I did for create a loopback file and the run losetup:
# dd bs=1024k count=1024 if=/dev/zero of=1gb.testfile
# losetup /dev/loop4 1gb.testfs
Note: I have other loopback files running on /dev/loop{0,1,2,3}
already, so I use /dev/loop4 in my case.
Very sorry for made your confused. Could you please test it again?
I think the testfs.sh script will give you information of VCI and do
the real checks on each task after you setup /dev/loop4 correctly.
If the testfs.sh give you fails on 109 and 121, that can confirm this
is bug.
For other fails, you may ask Bertl, cause upstream author knows much
more than me, also much better than I forward your questions to him. :)
I suggest to put or mention these test tasks in util-vserver package
for our users to make sure the vserver patch+tools work properly.
Should I create another report as wistlist or only mentioned here is
enough?
Regards,
-Andrew
