reopen 666947 found 666947 0.9.13-2 thanks Dixi quod…
>sorry for this, but apparently, not all regressions in the new >emulation have been fixed. Still too severe regressions: >mv: memory exhausted These are still there, and it gets worse: the system boots and misbehaves. Boot log: tg@zigo:~/Aranym $ ./runheadless ARAnyM 0.9.13 Using config file: 'aranym.headless' >>> Missing value in Config file aranym.headless on line 8 !!! Could not open joystick 0 ARAnyM RTC Timer: /dev/rtc: No such file or directory ARAnyM LILO: Error loading ramdisk 'root.bin' Blitter tried to read byte from register ff8a00 at 007232 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-2-atari (Debian 3.2.14-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1+m68k.3) ) #1 Tue Apr 10 01:42:07 UTC 2012 [ 0.000000] Atari hardware found: VIDEL STDMA-SCSI ST_MFP YM2149 PCM CODEC DSP56K SCC ANALOG_JOY BLITTER IDE TT_CLK FDC_SPEED [ 0.000000] NatFeats found (ARAnyM, 1.0) [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 198432 [ 0.000000] Kernel command line: root=/dev/nfhd8p1 console=nfcon devtmpfs.mount=1 BOOT_IMAGE=vmlinux [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 787052k/787052k available (2752k kernel code, 10876k data, 112k init) [ 0.000000] NR_IRQS:72 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] Calibrating delay loop... 158.10 BogoMIPS (lpj=790528) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Security Framework initialized [ 0.070000] AppArmor: AppArmor disabled by boot time parameter [ 0.070000] Mount-cache hash table entries: 512 [ 0.070000] Initializing cgroup subsys cpuacct [ 0.070000] Initializing cgroup subsys memory [ 0.070000] Initializing cgroup subsys devices [ 0.070000] Initializing cgroup subsys freezer [ 0.070000] Initializing cgroup subsys blkio [ 0.070000] devtmpfs: initialized [ 0.080000] print_constraints: dummy: [ 0.080000] NET: Registered protocol family 16 [ 0.100000] bio: create slab <bio-0> at 0 [ 0.100000] SCSI subsystem initialized [ 0.140000] NET: Registered protocol family 2 [ 0.140000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.140000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.170000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.170000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.170000] TCP reno registered [ 0.170000] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.170000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.170000] NET: Registered protocol family 1 [ 0.170000] nfhd8: found device with 20971440 blocks (512 bytes) [ 0.190000] nfhd8: AHDI p1 p2 [ 0.190000] console [nfcon0] enabled [ 0.190000] nfeth: API 5 [ 0.190000] eth0: nfeth addr:192.168.0.1 (192.168.0.2) HWaddr:52:54:00:22:81:00 [ 0.200000] audit: initializing netlink socket (disabled) [ 0.200000] type=2000 audit(1331757211.200:1): initialized [ 0.200000] VFS: Disk quotas dquot_6.5.2 [ 0.200000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.200000] msgmni has been set to 1537 [ 0.210000] alg: No test for stdrng (krng) [ 0.210000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.210000] io scheduler noop registered [ 0.210000] io scheduler deadline registered [ 0.210000] io scheduler cfq registered (default) [ 0.210000] atafb_init: start [ 0.210000] atafb_init: initializing Falcon hw [ 0.210000] atafb: screen_base 00b9d000 real_screen_base 00b9d000 screen_len 311296 [ 0.210000] Determined 640x480, depth 4 [ 0.210000] virtual 640x972 [ 0.220000] Console: switching to colour frame buffer device 80x30 [ 0.230000] fb0: frame buffer device, using 304K of video memory [ 0.230000] Non-volatile memory driver v1.3 [ 0.230000] Atari floppy driver: max. HD, track buffering [ 0.230000] Probing floppy drive(s): [ 0.240000] fd0 [ 0.240000] Uniform Multi-Platform E-IDE driver [ 0.240000] ide: Falcon IDE controller [ 0.550000] hda: Master, ATA DISK drive [ 1.630000] ide0 at 0xfff00000 on irq 15 (serialized) [ 1.630000] ide-gd driver 1.18 [ 1.630000] hda: max request size: 128KiB [ 1.630000] hda: 20971440 sectors (10737 MB) w/256KiB Cache, CHS=20805/16/63 [ 1.650000] hda: AHDI hda1 hda2 [ 1.650000] ide-cd driver 5.00 [ 1.650000] scsi0: options CAN_QUEUE=8 CMD_PER_LUN=1 SCAT-GAT=0 TAGGED-QUEUING=no HOSTID=7 generic options AUTOSENSE REAL DMA SCSI-2 TAGGED QUEUING generic release=7 [ 1.650000] scsi0 : Atari native SCSI [ 1.660000] blk_queue_max_segments: set to minimum 1 [ 1.910000] blk_queue_max_segments: set to minimum 1 [ 1.910000] mousedev: PS/2 mouse device common for all mice [ 2.160000] input: Atari Keyboard as /devices/virtual/input/input0 [ 2.160000] input: Atari mouse as /devices/virtual/input/input1 [ 2.410000] blk_queue_max_segments: set to minimum 1 [ 2.660000] blk_queue_max_segments: set to minimum 1 [ 2.910000] blk_queue_max_segments: set to minimum 1 [ 2.910000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 2.910000] TCP cubic registered [ 2.910000] NET: Registered protocol family 17 [ 2.910000] NET: Registered protocol family 15 [ 2.910000] registered taskstats version 1 [ 2.910000] scsi: waiting for bus probes to complete ... [ 3.160000] blk_queue_max_segments: set to minimum 1 [ 3.410000] blk_queue_max_segments: set to minimum 1 [ 3.710000] rtc-generic rtc-generic: setting system clock to 2012-04-14 20:33:35 UTC (1334435615) [ 3.710000] EXT4-fs (nfhd8p1): mounting ext3 file system using the ext4 subsystem [ 3.750000] EXT4-fs (nfhd8p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.750000] VFS: Mounted root (ext3 filesystem) readonly on device 254:129. [ 3.800000] devtmpfs: mounted INIT: version 2.88 booting Setting hostname to 'ara5.mirbsd.org'...done. Setting the system clock. System Clock set to: Sat Apr 14 20:33:42 UTC 2012. Activating swap:swapon on /dev/nfhd8p2 swapon: /dev/nfhd8p2: found swap signature: version 1, page-size 4, same byte order swapon: /dev/nfhd8p2: pagesize=4096, swapsize=2037374976, devsize=2037377024 [ 11.180000] Adding 1989620k swap on /dev/nfhd8p2. Priority:-1 extents:1 across:1989620k . [ 11.530000] EXT4-fs (nfhd8p1): re-mounted. Opts: (null) Will now check root file system:fsck from util-linux 2.20.1 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/nfhd8p1 e2fsck 1.42.2 (27-Mar-2012) /dev/nfhd8p1: clean, 47534/1062880 files, 359514/2124023 blocks . [ 12.320000] EXT4-fs (nfhd8p1): re-mounted. Opts: errors=remount-ro readlink: memory exhausted Cannot initialize /proc/mounts. ... failed! Setting the system clock. System Clock set to: Sat Apr 14 20:33:45 UTC 2012. Cleaning up ifupdown.... Will now activate lvm and md swap:done. Will now check all file systems. fsck from util-linux 2.20.1 Checking all file systems. Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. Setting kernel variables ... /etc/sysctl.conf...done. Will now mount local filesystems:. Will now activate swapfile swap:done. Cleaning up temporary files...find: cannot search `.': Invalid argument . Checking minimum space in /tmp...done. Setting up networking.... Configuring network interfaces...Restarting openntpd: ntpd. [ 23.020000] ------------[ cut here ]------------ [ 23.020000] WARNING: at /tmp/buildd/linux-2.6-3.2.14/debian/build/source_m68k_none/kernel/irq/handle.c:130 handle_irq_event_percpu+0x130/0x13e() [ 23.020000] irq 3 handler nfeth_interrupt+0x0/0x190 enabled interrupts [ 23.020000] Modules linked in: [ 23.020000] Call Trace: [<0003047a>] warn_slowpath_common+0x48/0x6a [ 23.020000] [<00030488>] warn_slowpath_common+0x56/0x6a [ 23.020000] [<00030514>] warn_slowpath_fmt+0x2a/0x32 [ 23.020000] [<000666c2>] handle_irq_event_percpu+0x130/0x13e [ 23.020000] [<002aadd2>] printk+0x0/0x18 [ 23.020000] [<000666c2>] handle_irq_event_percpu+0x130/0x13e [ 23.020000] [<0000a338>] nfeth_interrupt+0x0/0x190 [ 23.020000] [<000666f0>] handle_irq_event+0x20/0x2c [ 23.020000] [<00065ef8>] generic_handle_irq+0x2c/0x3a [ 23.020000] [<00002940>] do_IRQ+0x20/0x32 [ 23.020000] [<00002766>] auto_irqhandler_fixup+0x4/0x6 [ 23.020000] [<000101c0>] srem+0x27e/0x292 [ 23.020000] [ 23.020000] ---[ end trace 57a5dc2330927342 ]--- done. Cleaning up temporary files...find: cannot search `.': Invalid argument . Initializing random number generator...[ 24.220000] NET: Registered protocol family 10 done. find: cannot search `/var/run/screen': Invalid argument INIT: Entering runlevel: 2 Starting system log daemon.... Starting kernel log daemon.... Starting OpenBSD Secure Shell server: sshd. Synchronising with 3.mirbsd.pool.ntp.org first. rdate: Could not set time of day: Invalid argument Starting openntpd: SSL tunnels disabled, see /etc/default/stunnel4 Starting Mail Transport Agent (MTA): sendmail. mv: memory exhausted mv: memory exhausted mv: memory exhausted mv: memory exhausted mv: memory exhausted find: cannot search `/var/lib/sudo' Starting periodic command scheduler: cron. Running local boot scripts (/etc/rc.local)It may take up to one minute to decide whether rngd works. Get statistics into syslog with: sudo pkill -USR1 rngd Initialisation sequence complete. . Updating the system logo...done. Now I can ssh onto the system, but things are totally weird: tg@blau:~ $ date -u; ssh ara5 'date -u; rdate -nvp herc.mirbsd.org' Sat Apr 14 20:39:37 GMT 2012 Sat Apr 14 20:39:37 UTC 2012 Mon Mar 27 17:25:29 UTC 1944 rdate: adjust local clock by -2147481500.516353 seconds So, the time is the same between local and ARAnyM system, but rdate (the very tool I use to (initially) sync them) shows a totally bogus time. (It does use floating point ops.) I also still worry about these lines: |readlink: memory exhausted |Cannot initialize /proc/mounts. ... failed! |Cleaning up temporary files...find: cannot search `.': Invalid argument |find: cannot search `/var/run/screen': Invalid argument And the best: root@ara5:~ # uptime 20:41:54 up -24855 days, -3:-14, 0 users, load average: 0.03, 0.07, 0.05 So, sorry for this, but someone needs to work on it again before it gets usable. Although, with this, it probably becomes an upstream problem. Still RC severity to prevent the faulty package from migrating to wheezy. bye, //mirabilos -- FWIW, I'm quite impressed with mksh interactively. I thought it was much *much* more bare bones. But it turns out it beats the living hell out of ksh93 in that respect. I'd even consider it for my daily use if I hadn't wasted half my life on my zsh setup. :-) -- Frank Terbeck in #!/bin/mksh -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
