--- Begin Message ---
Package: qpdf
Version: 2.3.1-3
Severity: serious
Justification: FTBFS
User: debian-...@lists.debian.org
Usertags: ftbfs-gcc-4.7
Hello,
qpdf currently FTBFS in sid, most probably due to the switch to
gcc-4.7:
include/qpdf/QPDFExc.hh:22:6: error: 'off_t' has not been declared
See attached log.
Samuel
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.4 (SMP w/8 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages qpdf depends on:
ii libc6 2.13-32
ii libgcc1 1:4.7.0-7
ii libpcre3 1:8.30-5
ii libqpdf3 2.3.1-3
ii libstdc++6 4.7.0-7
ii zlib1g 1:1.2.7.dfsg-1
qpdf recommends no packages.
qpdf suggests no packages.
-- no debconf information
--
Samuel Thibault <samuel.thiba...@fnac.net>
RK > Some "PC speakers" are actually buzzers in some cases rather than
RK > real loudspeakers which give a squark rather than a beep.
DW They're not _that_ bad. Even on most recent hardware, mp3s played
DW through the PC speaker are relatively recognisable :)
-+- lkml -+-
W: /home/samy/.pbuilderrc does not exist
dpkg-buildpackage: source package qpdf
dpkg-buildpackage: source version 2.3.1-3
dpkg-buildpackage: source changed by Jay Berkenbilt <q...@debian.org>
dpkg-source -i -I --before-build qpdf-2.3.1
fakeroot debian/rules clean
test -x debian/rules
dh_testroot
rm -f debian/stamp-makefile-build debian/stamp-makefile-install
/usr/bin/make -C . -k distclean
Please run ./configure before running /usr/bin/make
make[1]: Entering directory `/tmp/qpdf-2.3.1'
Makefile:46: *** unable to continue with build. Stop.
make[1]: Leaving directory `/tmp/qpdf-2.3.1'
make: [makefile-clean] Error 2 (ignored)
rm -f debian/stamp-autotools
rmdir --ignore-fail-on-non-empty .
rmdir: failed to remove `.': Invalid argument
make: [makefile-clean] Error 1 (ignored)
rm -f -r debian/l_stamps
for i in ./config.guess ./config.sub ; do \
if test -e $i.cdbs-orig ; then \
mv $i.cdbs-orig $i ; \
fi ; \
done
dh_clean
rm -f debian/stamp-autotools-files
rm -f *.cdbs-config_list
dpkg-source -i -I -b qpdf-2.3.1
dpkg-source: info: using source format `3.0 (quilt)'
dpkg-source: info: building qpdf using existing ./qpdf_2.3.1.orig.tar.gz
dpkg-source: info: building qpdf in qpdf_2.3.1-3.debian.tar.gz
dpkg-source: info: building qpdf in qpdf_2.3.1-3.dsc
dpkg-genchanges -S >../qpdf_2.3.1-3_source.changes
dpkg-genchanges: not including original source code in upload
dpkg-source -i -I --after-build qpdf-2.3.1
dpkg-buildpackage: binary and diff upload (original source NOT included)
W: /home/samy/.pbuilderrc does not exist
I: using fakeroot in build.
I: Current time: Fri May 18 14:15:11 CEST 2012
I: pbuilder-time-stamp: 1337343311
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/base.tgz]
I: creating local configuration
I: copying local configuration
I: mounting /proc filesystem
I: mounting /dev/pts filesystem
I: Mounting /var/cache/pbuilder/ccache
I: policy-rc.d already exists
I: Obtaining the cached apt archive contents
I: Setting up ccache
I: Installing the build-deps
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: amd64
Maintainer: Debian Pbuilder Team <pbuilder-ma...@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by
pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: cdbs (>= 0.4.93~), debhelper (>= 8.1.3), libpcre3-dev, zlib1g-dev,
hardening-wrapper
dpkg-deb: building package `pbuilder-satisfydepends-dummy' in
`/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 11946 files and directories currently installed.)
Unpacking pbuilder-satisfydepends-dummy (from
.../pbuilder-satisfydepends-dummy.deb) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring
anyway as you requested:
pbuilder-satisfydepends-dummy depends on cdbs (>= 0.4.93~); however:
Package cdbs is not installed.
pbuilder-satisfydepends-dummy depends on debhelper (>= 8.1.3); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on libpcre3-dev; however:
Package libpcre3-dev is not installed.
pbuilder-satisfydepends-dummy depends on zlib1g-dev; however:
Package zlib1g-dev is not installed.
pbuilder-satisfydepends-dummy depends on hardening-wrapper; however:
Package hardening-wrapper is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
The following NEW packages will be installed:
bsdmainutils{a} cdbs{a} debhelper{a} file{a} gettext{a} gettext-base{a}
groff-base{a} hardening-wrapper{a} html2text{a} intltool-debian{a}
libasprintf0c2{a} libcroco3{a} libffi5{a} libgettextpo0{a}
libglib2.0-0{a} libmagic1{a} libpcre3{a} libpcre3-dev{a} libpcrecpp0{a}
libpipeline1{a} libunistring0{a} libxml2{a} man-db{a} po-debconf{a}
zlib1g-dev{a}
0 packages upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/10.7 MB of archives. After unpacking 27.6 MB will be used.
Writing extended state information...
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpipeline1:amd64.
(Reading database ... 11946 files and directories currently installed.)
Unpacking libpipeline1:amd64 (from .../libpipeline1_1.2.1-1_amd64.deb) ...
Selecting previously unselected package libasprintf0c2:amd64.
Unpacking libasprintf0c2:amd64 (from .../libasprintf0c2_0.18.1.1-8_amd64.deb)
...
Selecting previously unselected package libmagic1:amd64.
Unpacking libmagic1:amd64 (from .../libmagic1_5.11-1_amd64.deb) ...
Selecting previously unselected package libpcre3:amd64.
Unpacking libpcre3:amd64 (from .../libpcre3_1%3a8.30-5_amd64.deb) ...
Selecting previously unselected package libxml2:amd64.
Unpacking libxml2:amd64 (from .../libxml2_2.7.8.dfsg-9_amd64.deb) ...
Selecting previously unselected package libffi5:amd64.
Unpacking libffi5:amd64 (from .../libffi5_3.0.10-3_amd64.deb) ...
Selecting previously unselected package libglib2.0-0:amd64.
Unpacking libglib2.0-0:amd64 (from .../libglib2.0-0_2.32.3-1_amd64.deb) ...
Selecting previously unselected package libcroco3:amd64.
Unpacking libcroco3:amd64 (from .../libcroco3_0.6.5-1_amd64.deb) ...
Selecting previously unselected package libunistring0:amd64.
Unpacking libunistring0:amd64 (from .../libunistring0_0.9.3-5_amd64.deb) ...
Selecting previously unselected package libgettextpo0:amd64.
Unpacking libgettextpo0:amd64 (from .../libgettextpo0_0.18.1.1-8_amd64.deb) ...
Selecting previously unselected package libpcrecpp0:amd64.
Unpacking libpcrecpp0:amd64 (from .../libpcrecpp0_1%3a8.30-5_amd64.deb) ...
Selecting previously unselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_9.0.1_amd64.deb) ...
Selecting previously unselected package groff-base.
Unpacking groff-base (from .../groff-base_1.21-7_amd64.deb) ...
Selecting previously unselected package man-db.
Unpacking man-db (from .../man-db_2.6.1-2_amd64.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../archives/file_5.11-1_amd64.deb) ...
Selecting previously unselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.1.1-8_amd64.deb) ...
Selecting previously unselected package cdbs.
Unpacking cdbs (from .../archives/cdbs_0.4.111_all.deb) ...
Selecting previously unselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-15_amd64.deb) ...
Selecting previously unselected package gettext.
Unpacking gettext (from .../gettext_0.18.1.1-8_amd64.deb) ...
Selecting previously unselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb)
...
Selecting previously unselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2_all.deb) ...
Selecting previously unselected package debhelper.
Unpacking debhelper (from .../debhelper_9.20120513_all.deb) ...
Selecting previously unselected package hardening-wrapper.
Unpacking hardening-wrapper (from .../hardening-wrapper_2.1_amd64.deb) ...
Adding 'diversion of /usr/bin/gcc-4.2 to /usr/bin/gcc-4.2.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/g++-4.2 to /usr/bin/g++-4.2.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/gcc-4.3 to /usr/bin/gcc-4.3.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/g++-4.3 to /usr/bin/g++-4.3.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/gcc-4.4 to /usr/bin/gcc-4.4.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/g++-4.4 to /usr/bin/g++-4.4.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/gcc-4.5 to /usr/bin/gcc-4.5.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/g++-4.5 to /usr/bin/g++-4.5.real by
hardening-wrapper'
Adding 'diversion of /usr/bin/gcc-4.6 to /usr/bin/gcc-4.6.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Adding 'diversion of /usr/bin/g++-4.6 to /usr/bin/g++-4.6.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Adding 'diversion of /usr/bin/gcc-4.7 to /usr/bin/gcc-4.7.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Adding 'diversion of /usr/bin/g++-4.7 to /usr/bin/g++-4.7.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Adding 'diversion of /usr/bin/ld.bfd to /usr/bin/ld.bfd.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Adding 'diversion of /usr/bin/ld.gold to /usr/bin/ld.gold.real by
hardening-wrapper'
dpkg-divert: warning: files list file for package `hardening-wrapper' missing,
assuming package has no files currently installed.
Selecting previously unselected package libpcre3-dev.
Unpacking libpcre3-dev (from .../libpcre3-dev_1%3a8.30-5_amd64.deb) ...
Selecting previously unselected package zlib1g-dev:amd64.
Unpacking zlib1g-dev:amd64 (from .../zlib1g-dev_1%3a1.2.7.dfsg-1_amd64.deb) ...
Setting up libpipeline1:amd64 (1.2.1-1) ...
Setting up libasprintf0c2:amd64 (0.18.1.1-8) ...
Setting up libmagic1:amd64 (5.11-1) ...
Setting up libpcre3:amd64 (1:8.30-5) ...
Setting up libxml2:amd64 (2.7.8.dfsg-9) ...
Setting up libffi5:amd64 (3.0.10-3) ...
Setting up libglib2.0-0:amd64 (2.32.3-1) ...
No schema files found: doing nothing.
Setting up libcroco3:amd64 (0.6.5-1) ...
Setting up libunistring0:amd64 (0.9.3-5) ...
Setting up libgettextpo0:amd64 (0.18.1.1-8) ...
Setting up libpcrecpp0:amd64 (1:8.30-5) ...
Setting up bsdmainutils (9.0.1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write)
in auto mode.
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in
auto mode.
Setting up groff-base (1.21-7) ...
Setting up man-db (2.6.1-2) ...
Building database of manual pages ...
Setting up file (5.11-1) ...
Setting up gettext-base (0.18.1.1-8) ...
Setting up cdbs (0.4.111) ...
Setting up html2text (1.3.2a-15) ...
Setting up gettext (0.18.1.1-8) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20120513) ...
Setting up hardening-wrapper (2.1) ...
Setting up libpcre3-dev (1:8.30-5) ...
Setting up zlib1g-dev:amd64 (1:1.2.7.dfsg-1) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
fakeroot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/109 kB of archives.
After this operation, 324 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
fakeroot
debconf: delaying package configuration, since apt-utils is not installed
Authentication warning overridden.
Selecting previously unselected package fakeroot.
(Reading database ... 13557 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.18.3-1_amd64.deb) ...
Processing triggers for man-db ...
Setting up fakeroot (1.18.3-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot
(fakeroot) in auto mode.
I: Copying back the cached apt archive contents
I: Copying source file
I: copying [../qpdf_2.3.1-3.dsc]
I: copying [../qpdf_2.3.1.orig.tar.gz]
I: copying [../qpdf_2.3.1-3.debian.tar.gz]
I: Extracting source
dpkg-source: warning: extracting unsigned source package (qpdf_2.3.1-3.dsc)
dpkg-source: info: extracting qpdf in qpdf-2.3.1
dpkg-source: info: unpacking qpdf_2.3.1.orig.tar.gz
dpkg-source: info: unpacking qpdf_2.3.1-3.debian.tar.gz
dpkg-source: info: applying pcre.patch
dpkg-source: info: applying man-typo.patch
I: Building the package
I: Running cd tmp/buildd/*/ && env
PATH="/usr/lib/ccache:/usr/sbin:/usr/bin:/sbin:/bin" dpkg-buildpackage -us -uc
-i -I -rfakeroot
dpkg-buildpackage: source package qpdf
dpkg-buildpackage: source version 2.3.1-3
dpkg-buildpackage: source changed by Jay Berkenbilt <q...@debian.org>
dpkg-source -i -I --before-build qpdf-2.3.1
dpkg-buildpackage: host architecture amd64
fakeroot debian/rules clean
test -x debian/rules
dh_testroot
rm -f debian/stamp-makefile-build debian/stamp-makefile-install
/usr/bin/make -C . -k distclean
Please run ./configure before running /usr/bin/make
make[1]: Entering directory `/tmp/buildd/qpdf-2.3.1'
Makefile:46: *** unable to continue with build. Stop.
make[1]: Leaving directory `/tmp/buildd/qpdf-2.3.1'
make: [makefile-clean] Error 2 (ignored)
rm -f debian/stamp-autotools
rmdir --ignore-fail-on-non-empty .
rmdir: failed to remove `.': Invalid argument
make: [makefile-clean] Error 1 (ignored)
rm -f -r debian/l_stamps
for i in ./config.guess ./config.sub ; do \
if test -e $i.cdbs-orig ; then \
mv $i.cdbs-orig $i ; \
fi ; \
done
dh_clean
rm -f debian/stamp-autotools-files
rm -f *.cdbs-config_list
dpkg-source -i -I -b qpdf-2.3.1
dpkg-source: info: using source format `3.0 (quilt)'
dpkg-source: info: building qpdf using existing ./qpdf_2.3.1.orig.tar.gz
dpkg-source: info: building qpdf in qpdf_2.3.1-3.debian.tar.gz
dpkg-source: info: building qpdf in qpdf_2.3.1-3.dsc
debian/rules build
test -x debian/rules
mkdir -p "."
/usr/share/cdbs/1/rules/buildcore.mk:109: WARNING: DEB_COMPRESS_EXCLUDE is a
deprecated variable
if test -e /usr/share/misc/config.guess ; then \
for i in ./config.guess ; do \
if ! test -e $i.cdbs-orig ; then \
mv $i $i.cdbs-orig ; \
cp --remove-destination
/usr/share/misc/config.guess $i ; \
fi ; \
done ; \
fi
if test -e /usr/share/misc/config.sub ; then \
for i in ./config.sub ; do \
if ! test -e $i.cdbs-orig ; then \
mv $i $i.cdbs-orig ; \
cp --remove-destination
/usr/share/misc/config.sub $i ; \
fi ; \
done ; \
fi
touch debian/stamp-autotools-files
chmod a+x /tmp/buildd/qpdf-2.3.1/./configure
mkdir -p .
cd . && CFLAGS="-Wall -g" CXXFLAGS="-g -O2 -fstack-protector
--param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall"
CPPFLAGS="-D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro"
/tmp/buildd/qpdf-2.3.1/./configure --build=x86_64-linux-gnu --prefix=/usr
--includedir="\${prefix}/include" --mandir="\${prefix}/share/man"
--infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var
--libexecdir="\${prefix}/lib/qpdf" --srcdir=. --disable-maintainer-mode
--disable-dependency-tracking --disable-silent-rules
--libdir="\${prefix}/lib/x86_64-linux-gnu" --disable-test-compare-images
configure: WARNING: unrecognized options: --disable-maintainer-mode,
--disable-dependency-tracking, --disable-silent-rules
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 3458764513820540925
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking how to run the C++ preprocessor... g++ -E
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared
libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared
libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared
libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for whether to use external libraries distribution... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for library containing deflate... -lz
checking pcre.h usability... yes
checking pcre.h presence... yes
checking for pcre.h... yes
checking for library containing pcre_compile... -lpcre
checking for uint16_t... yes
checking for uint32_t... yes
checking for random... yes
checking for gnu make >= 3.81... yes
checking for whether gcc supports -MD -MF x.dep -MP... yes
checking which build rules to use... libtool
checking for whether gcc supports -Wall... yes
checking for whether to use -Werror... no
checking for xml to xhtml docbook stylesheets... no
checking for xml to fo docbook stylesheets... no
checking for docbook 4.x xml DTD... no
checking for fop... no
checking for xsltproc... no
checking for xmllint... no
configure: creating ./config.status
config.status: creating autoconf.mk
config.status: creating manual/html.xsl
config.status: creating manual/print.xsl
config.status: creating libqpdf/qpdf/qpdf-config.h
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-maintainer-mode,
--disable-dependency-tracking, --disable-silent-rules
touch debian/stamp-autotools
/usr/bin/make -C .
make[1]: Entering directory `/tmp/buildd/qpdf-2.3.1'
sed -e 's:@PACKAGE_VERSION@:2.3.1:g' \
-e 's:@docdir@:/usr/share/doc/qpdf:g' \
< manual/qpdf.1.in > doc/qpdf.1
sed -e 's:@PACKAGE_VERSION@:2.3.1:g' \
-e 's:@docdir@:/usr/share/doc/qpdf:g' \
< manual/fix-qdf.1.in > doc/fix-qdf.1
sed -e 's:@PACKAGE_VERSION@:2.3.1:g' \
-e 's:@docdir@:/usr/share/doc/qpdf:g' \
< manual/zlib-flate.1.in > doc/zlib-flate.1
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/BitStream.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/BitStream.cc -o libqpdf/build/BitStream.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/BitStream.tdep > libqpdf/build/BitStream.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/BitWriter.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/BitWriter.cc -o libqpdf/build/BitWriter.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/BitWriter.tdep > libqpdf/build/BitWriter.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Buffer.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Buffer.cc -o libqpdf/build/Buffer.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Buffer.tdep > libqpdf/build/Buffer.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/MD5.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/MD5.cc -o libqpdf/build/MD5.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/MD5.tdep > libqpdf/build/MD5.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/PCRE.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/PCRE.cc -o libqpdf/build/PCRE.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/PCRE.tdep > libqpdf/build/PCRE.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pipeline.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pipeline.cc -o libqpdf/build/Pipeline.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pipeline.tdep > libqpdf/build/Pipeline.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_AES_PDF.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_AES_PDF.cc -o libqpdf/build/Pl_AES_PDF.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_AES_PDF.tdep > libqpdf/build/Pl_AES_PDF.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_ASCII85Decoder.tdep -MP -Iinclude
-Ilibqpdf -c libqpdf/Pl_ASCII85Decoder.cc -o libqpdf/build/Pl_ASCII85Decoder.o;
sed -e 's/\.o:/.lo:/' < libqpdf/build/Pl_ASCII85Decoder.tdep >
libqpdf/build/Pl_ASCII85Decoder.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_ASCIIHexDecoder.tdep -MP -Iinclude
-Ilibqpdf -c libqpdf/Pl_ASCIIHexDecoder.cc -o
libqpdf/build/Pl_ASCIIHexDecoder.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_ASCIIHexDecoder.tdep > libqpdf/build/Pl_ASCIIHexDecoder.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_Buffer.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_Buffer.cc -o libqpdf/build/Pl_Buffer.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_Buffer.tdep > libqpdf/build/Pl_Buffer.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_Count.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_Count.cc -o libqpdf/build/Pl_Count.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_Count.tdep > libqpdf/build/Pl_Count.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_Discard.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_Discard.cc -o libqpdf/build/Pl_Discard.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_Discard.tdep > libqpdf/build/Pl_Discard.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_Flate.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_Flate.cc -o libqpdf/build/Pl_Flate.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_Flate.tdep > libqpdf/build/Pl_Flate.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_LZWDecoder.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_LZWDecoder.cc -o libqpdf/build/Pl_LZWDecoder.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/Pl_LZWDecoder.tdep >
libqpdf/build/Pl_LZWDecoder.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_MD5.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_MD5.cc -o libqpdf/build/Pl_MD5.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_MD5.tdep > libqpdf/build/Pl_MD5.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_PNGFilter.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_PNGFilter.cc -o libqpdf/build/Pl_PNGFilter.o; sed -e 's/\.o:/.lo:/'
< libqpdf/build/Pl_PNGFilter.tdep > libqpdf/build/Pl_PNGFilter.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_QPDFTokenizer.tdep -MP -Iinclude -Ilibqpdf
-c libqpdf/Pl_QPDFTokenizer.cc -o libqpdf/build/Pl_QPDFTokenizer.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/Pl_QPDFTokenizer.tdep >
libqpdf/build/Pl_QPDFTokenizer.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_RC4.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_RC4.cc -o libqpdf/build/Pl_RC4.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/Pl_RC4.tdep > libqpdf/build/Pl_RC4.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/Pl_StdioFile.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/Pl_StdioFile.cc -o libqpdf/build/Pl_StdioFile.o; sed -e 's/\.o:/.lo:/'
< libqpdf/build/Pl_StdioFile.tdep > libqpdf/build/Pl_StdioFile.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF.cc -o libqpdf/build/QPDF.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF.tdep > libqpdf/build/QPDF.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFExc.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDFExc.cc -o libqpdf/build/QPDFExc.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDFExc.tdep > libqpdf/build/QPDFExc.dep
In file included from libqpdf/QPDFExc.cc:1:0:
include/qpdf/QPDFExc.hh:22:6: error: 'off_t' has not been declared
In file included from libqpdf/QPDFExc.cc:1:0:
include/qpdf/QPDFExc.hh:44:5: error: 'off_t' does not name a type
include/qpdf/QPDFExc.hh:51:7: error: 'off_t' has not been declared
include/qpdf/QPDFExc.hh:57:5: error: 'off_t' does not name a type
libqpdf/QPDFExc.cc:4:1: error: prototype for
'QPDFExc::QPDFExc(qpdf_error_code_e, const string&, const string&, off_t, const
string&)' does not match any in class 'QPDFExc'
In file included from libqpdf/QPDFExc.cc:1:0:
include/qpdf/QPDFExc.hh:15:7: error: candidates are: QPDFExc::QPDFExc(const
QPDFExc&)
include/qpdf/QPDFExc.hh:19:5: error:
QPDFExc::QPDFExc(qpdf_error_code_e, const string&, const string&, int, const
string&)
libqpdf/QPDFExc.cc:23:1: error: prototype for 'std::string
QPDFExc::createWhat(const string&, const string&, off_t, const string&)' does
not match any in class 'QPDFExc'
In file included from libqpdf/QPDFExc.cc:1:0:
include/qpdf/QPDFExc.hh:49:24: error: candidate is: static std::string
QPDFExc::createWhat(const string&, const string&, int, const string&)
libqpdf/QPDFExc.cc:77:28: error: no 'off_t QPDFExc::getFilePosition() const'
member function declared in class 'QPDFExc'
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFObject.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDFObject.cc -o libqpdf/build/QPDFObject.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDFObject.tdep > libqpdf/build/QPDFObject.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFObjectHandle.tdep -MP -Iinclude -Ilibqpdf
-c libqpdf/QPDFObjectHandle.cc -o libqpdf/build/QPDFObjectHandle.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/QPDFObjectHandle.tdep >
libqpdf/build/QPDFObjectHandle.dep
In file included from libqpdf/QPDFObjectHandle.cc:1:0:
include/qpdf/QPDFObjectHandle.hh:329:36: error: 'off_t' has not been declared
include/qpdf/QPDFObjectHandle.hh:373:32: error: 'off_t' has not been declared
libqpdf/QPDFObjectHandle.cc:605:1: error: prototype for 'QPDFObjectHandle
QPDFObjectHandle::newStream(QPDF*, int, int, QPDFObjectHandle, off_t, int)'
does not match any in class 'QPDFObjectHandle'
In file included from libqpdf/QPDFObjectHandle.cc:1:0:
include/qpdf/QPDFObjectHandle.hh:371:29: error: candidates are: static
QPDFObjectHandle QPDFObjectHandle::newStream(QPDF*, int, int, QPDFObjectHandle,
int, int)
In file included from libqpdf/QPDFObjectHandle.cc:1:0:
include/qpdf/QPDFObjectHandle.hh:136:29: error: static
QPDFObjectHandle QPDFObjectHandle::newStream(QPDF*, PointerHolder<Buffer>)
In file included from libqpdf/QPDFObjectHandle.cc:1:0:
include/qpdf/QPDFObjectHandle.hh:120:29: error: static
QPDFObjectHandle QPDFObjectHandle::newStream(QPDF*)
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFTokenizer.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDFTokenizer.cc -o libqpdf/build/QPDFTokenizer.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/QPDFTokenizer.tdep >
libqpdf/build/QPDFTokenizer.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFWriter.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDFWriter.cc -o libqpdf/build/QPDFWriter.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDFWriter.tdep > libqpdf/build/QPDFWriter.dep
libqpdf/QPDFWriter.cc: In member function 'void QPDFWriter::generateID()':
libqpdf/QPDFWriter.cc:1415:13: warning: narrowing conversion of '151' from
'int' to 'char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDFWriter.cc:1415:13: warning: narrowing conversion of '147' from
'int' to 'char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDFWriter.cc:1415:13: warning: narrowing conversion of '132' from
'int' to 'char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDFWriter.cc:1415:13: warning: narrowing conversion of '131' from
'int' to 'char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDFWriter.cc:1415:13: warning: narrowing conversion of '149' from
'int' to 'char' inside { } is ill-formed in C++11 [-Wnarrowing]
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDFXRefEntry.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDFXRefEntry.cc -o libqpdf/build/QPDFXRefEntry.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/QPDFXRefEntry.tdep >
libqpdf/build/QPDFXRefEntry.dep
In file included from libqpdf/QPDFXRefEntry.cc:2:0:
include/qpdf/QPDFExc.hh:22:6: error: 'off_t' has not been declared
In file included from libqpdf/QPDFXRefEntry.cc:2:0:
include/qpdf/QPDFExc.hh:44:5: error: 'off_t' does not name a type
include/qpdf/QPDFExc.hh:51:7: error: 'off_t' has not been declared
include/qpdf/QPDFExc.hh:57:5: error: 'off_t' does not name a type
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Array.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Array.cc -o libqpdf/build/QPDF_Array.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Array.tdep > libqpdf/build/QPDF_Array.dep
In file included from libqpdf/qpdf/QPDF_Array.hh:7:0,
from libqpdf/QPDF_Array.cc:1:
include/qpdf/QPDFObjectHandle.hh:329:36: error: 'off_t' has not been declared
include/qpdf/QPDFObjectHandle.hh:373:32: error: 'off_t' has not been declared
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Bool.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Bool.cc -o libqpdf/build/QPDF_Bool.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Bool.tdep > libqpdf/build/QPDF_Bool.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Dictionary.tdep -MP -Iinclude -Ilibqpdf
-c libqpdf/QPDF_Dictionary.cc -o libqpdf/build/QPDF_Dictionary.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/QPDF_Dictionary.tdep >
libqpdf/build/QPDF_Dictionary.dep
In file included from libqpdf/qpdf/QPDF_Dictionary.hh:9:0,
from libqpdf/QPDF_Dictionary.cc:1:
include/qpdf/QPDFObjectHandle.hh:329:36: error: 'off_t' has not been declared
include/qpdf/QPDFObjectHandle.hh:373:32: error: 'off_t' has not been declared
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Integer.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Integer.cc -o libqpdf/build/QPDF_Integer.o; sed -e 's/\.o:/.lo:/'
< libqpdf/build/QPDF_Integer.tdep > libqpdf/build/QPDF_Integer.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Name.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Name.cc -o libqpdf/build/QPDF_Name.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Name.tdep > libqpdf/build/QPDF_Name.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Null.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Null.cc -o libqpdf/build/QPDF_Null.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Null.tdep > libqpdf/build/QPDF_Null.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Real.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Real.cc -o libqpdf/build/QPDF_Real.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Real.tdep > libqpdf/build/QPDF_Real.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_Stream.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_Stream.cc -o libqpdf/build/QPDF_Stream.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_Stream.tdep > libqpdf/build/QPDF_Stream.dep
In file included from libqpdf/qpdf/QPDF_Stream.hh:6:0,
from libqpdf/QPDF_Stream.cc:1:
include/qpdf/QPDFObjectHandle.hh:329:36: error: 'off_t' has not been declared
include/qpdf/QPDFObjectHandle.hh:373:32: error: 'off_t' has not been declared
In file included from libqpdf/QPDF_Stream.cc:1:0:
libqpdf/qpdf/QPDF_Stream.hh:16:3: error: 'off_t' has not been declared
libqpdf/qpdf/QPDF_Stream.hh:53:5: error: 'off_t' does not name a type
libqpdf/QPDF_Stream.cc:23:1: error: prototype for
'QPDF_Stream::QPDF_Stream(QPDF*, int, int, QPDFObjectHandle, off_t, int)' does
not match any in class 'QPDF_Stream'
In file included from libqpdf/QPDF_Stream.cc:1:0:
libqpdf/qpdf/QPDF_Stream.hh:11:7: error: candidates are:
QPDF_Stream::QPDF_Stream(const QPDF_Stream&)
libqpdf/qpdf/QPDF_Stream.hh:14:5: error:
QPDF_Stream::QPDF_Stream(QPDF*, int, int, QPDFObjectHandle, int, int)
libqpdf/QPDF_Stream.cc: In member function 'bool
QPDF_Stream::filterable(std::vector<std::basic_string<char> >&, int&, int&,
bool&)':
libqpdf/QPDF_Stream.cc:253:19: error: 'class QPDF_Stream' has no member named
'offset'
libqpdf/QPDF_Stream.cc: In member function 'bool
QPDF_Stream::pipeStreamData(Pipeline*, bool, bool, bool)':
libqpdf/QPDF_Stream.cc:402:20: error: 'class QPDF_Stream' has no member named
'offset'
libqpdf/QPDF_Stream.cc:412:14: error: 'class QPDF_Stream' has no member named
'offset'
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_String.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QPDF_String.cc -o libqpdf/build/QPDF_String.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_String.tdep > libqpdf/build/QPDF_String.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_encryption.tdep -MP -Iinclude -Ilibqpdf
-c libqpdf/QPDF_encryption.cc -o libqpdf/build/QPDF_encryption.o; sed -e
's/\.o:/.lo:/' < libqpdf/build/QPDF_encryption.tdep >
libqpdf/build/QPDF_encryption.dep
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '191' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '138' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '255' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '250' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '182' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '208' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '128' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '169' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
libqpdf/QPDF_encryption.cc:24:1: warning: narrowing conversion of '254' from
'int' to 'const char' inside { } is ill-formed in C++11 [-Wnarrowing]
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_linearization.tdep -MP -Iinclude
-Ilibqpdf -c libqpdf/QPDF_linearization.cc -o
libqpdf/build/QPDF_linearization.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QPDF_linearization.tdep > libqpdf/build/QPDF_linearization.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QPDF_optimization.tdep -MP -Iinclude
-Ilibqpdf -c libqpdf/QPDF_optimization.cc -o libqpdf/build/QPDF_optimization.o;
sed -e 's/\.o:/.lo:/' < libqpdf/build/QPDF_optimization.tdep >
libqpdf/build/QPDF_optimization.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QTC.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QTC.cc -o libqpdf/build/QTC.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QTC.tdep > libqpdf/build/QTC.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/QUtil.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/QUtil.cc -o libqpdf/build/QUtil.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/QUtil.tdep > libqpdf/build/QUtil.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/RC4.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/RC4.cc -o libqpdf/build/RC4.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/RC4.tdep > libqpdf/build/RC4.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/qpdf-c.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/qpdf-c.cc -o libqpdf/build/qpdf-c.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/qpdf-c.tdep > libqpdf/build/qpdf-c.dep
/bin/sh ./libtool --quiet --mode=compile g++ -D_FORTIFY_SOURCE=2 -g -O2
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security
-Wall -Wall -MD -MF libqpdf/build/rijndael.tdep -MP -Iinclude -Ilibqpdf -c
libqpdf/rijndael.cc -o libqpdf/build/rijndael.o; sed -e 's/\.o:/.lo:/' <
libqpdf/build/rijndael.tdep > libqpdf/build/rijndael.dep
/bin/sh ./libtool --mode=link g++ -g -O2 -fstack-protector
--param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -Wall -o
libqpdf/build/libqpdf.la libqpdf/build/BitStream.lo libqpdf/build/BitWriter.lo
libqpdf/build/Buffer.lo libqpdf/build/MD5.lo libqpdf/build/PCRE.lo
libqpdf/build/Pipeline.lo libqpdf/build/Pl_AES_PDF.lo
libqpdf/build/Pl_ASCII85Decoder.lo libqpdf/build/Pl_ASCIIHexDecoder.lo
libqpdf/build/Pl_Buffer.lo libqpdf/build/Pl_Count.lo
libqpdf/build/Pl_Discard.lo libqpdf/build/Pl_Flate.lo
libqpdf/build/Pl_LZWDecoder.lo libqpdf/build/Pl_MD5.lo
libqpdf/build/Pl_PNGFilter.lo libqpdf/build/Pl_QPDFTokenizer.lo
libqpdf/build/Pl_RC4.lo libqpdf/build/Pl_StdioFile.lo libqpdf/build/QPDF.lo
libqpdf/build/QPDFExc.lo libqpdf/build/QPDFObject.lo
libqpdf/build/QPDFObjectHandle.lo libqpdf/build/QPDFTokenizer.lo
libqpdf/build/QPDFWriter.lo libqpdf/build/QPDFXRefEntry.lo
libqpdf/build/QPDF_Array.lo libqpdf/build/QPDF_Bool.lo
libqpdf/build/QPDF_Dictionary.lo libqpdf/build/QPDF_Integer.lo
libqpdf/build/QPDF_Name.lo libqpdf/build/QPDF_Null.lo
libqpdf/build/QPDF_Real.lo libqpdf/build/QPDF_Stream.lo
libqpdf/build/QPDF_String.lo libqpdf/build/QPDF_encryption.lo
libqpdf/build/QPDF_linearization.lo libqpdf/build/QPDF_optimization.lo
libqpdf/build/QTC.lo libqpdf/build/QUtil.lo libqpdf/build/RC4.lo
libqpdf/build/qpdf-c.lo libqpdf/build/rijndael.lo -Wl,-z,relro -lpcre -lz
-rpath /usr/lib/x86_64-linux-gnu -version-info 7:1:4
libtool: link: `libqpdf/build/QPDFExc.lo' is not a valid libtool object
make[1]: *** [libqpdf/build/libqpdf.la] Error 1
make[1]: Leaving directory `/tmp/buildd/qpdf-2.3.1'
make: *** [debian/stamp-makefile-build] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2
E: Failed autobuilding of package
I: unmounting /var/cache/pbuilder/ccache filesystem
I: unmounting dev/pts filesystem
I: unmounting proc filesystem
I: cleaning the build env
I: removing directory /var/cache/pbuilder/build//26134 and its subdirectories
--- End Message ---
