Your message dated Wed, 27 Feb 2013 02:09:50 +0000
with message-id <20130227020949.gr9...@decadent.org.uk>
and subject line Re: Bug#701781: linux-image-2.6.32-5-kirkwood: Cannot load
usbcore kernel module
has caused the Debian Bug report #701781,
regarding linux-image-2.6.32-5-kirkwood: Cannot load usbcore kernel module
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
701781: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=701781
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-48squeeze1
Severity: critical
Justification: breaks unrelated software
When try to insert usbcore module get message
FATAL: Error inserting usbcore
(/lib/modules/2.6.32-5-kirkwood/kernel/drivers/usb/core/usbcore.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
syslog shows:
kernel: [ 365.043708] usbcore: Unknown symbol current_is_keventd
kernel: [ 365.049776] usbcore: Unknown symbol add_device_randomness
So no modules depending on usb can load.
usbcore and dependent modules load when using
linux-image-2.6.32-5-kirkwood_2.6.32-46_armel.deb, but not with later versions:
linux-image-2.6.32-5-kirkwood_2.6.32-48_armel.deb or
linux-image-2.6.32-5-kirkwood_2.6.32-48squeeze1_armel.deb
Note that using latest linux-base does not affect the problem - an old version
is installed as I have
to downgrade to linux-image-2.6.32-5-kirkwood_2.6.32-46_armel to use the
system. I initially saw the
problem with all the latest packages intalled.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-45) (da...@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 Sun May 6 16:57:51 UTC 2012
** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
** Not tainted
** Kernel log:
[ 25.663305] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 25.703333] ata2.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
[ 25.709023] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 25.773404] ata2.00: configured for UDMA/133
[ 25.778020] scsi 1:0:0:0: Direct-Access ATA ST1000NM0011 SN03
PQ: 0 ANSI: 5
[ 25.834569] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 25.842858] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 25.851801] sd 0:0:0:0: [sda] Write Protect is off
[ 25.856658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.856905] sd 1:0:0:0: [sdb] Write Protect is off
[ 25.861727] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.861906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.871097] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.881514] sda:
[ 25.884036] sdb: sdb1 sdb2 sdb3 < sda1 sda2 sda3 < sdb5 sda5 sdb6 >
[ 25.915560] sda6 >
[ 25.921200] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 25.931331] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.323601] md: raid1 personality registered for level 1
[ 26.351570] mdadm: sending ioctl 1261 to a partition!
[ 26.356692] mdadm: sending ioctl 1261 to a partition!
[ 26.362367] mdadm: sending ioctl 1261 to a partition!
[ 26.367509] mdadm: sending ioctl 1261 to a partition!
[ 26.372954] mdadm: sending ioctl 1261 to a partition!
[ 26.378112] mdadm: sending ioctl 1261 to a partition!
[ 26.383703] mdadm: sending ioctl 1261 to a partition!
[ 26.388789] mdadm: sending ioctl 1261 to a partition!
[ 26.394854] mdadm: sending ioctl 1261 to a partition!
[ 26.399933] mdadm: sending ioctl 1261 to a partition!
[ 26.428623] md: md0 stopped.
[ 26.451073] md: bind<sdb1>
[ 26.463788] md: bind<sda1>
[ 26.473348] raid1: raid set md0 active with 2 out of 2 mirrors
[ 26.479354] md0: detected capacity change from 0 to 248500224
[ 26.490560] md0: unknown partition table
[ 26.722733] md: md1 stopped.
[ 26.735482] md: bind<sdb2>
[ 26.746362] md: bind<sda2>
[ 26.765069] raid1: raid set md1 active with 2 out of 2 mirrors
[ 26.771072] md1: detected capacity change from 0 to 279957504
[ 26.782237] md1: unknown partition table
[ 27.014813] md: md2 stopped.
[ 27.036009] md: bind<sdb6>
[ 27.039216] md: bind<sda6>
[ 27.057734] raid1: raid set md2 active with 2 out of 2 mirrors
[ 27.063854] md2: detected capacity change from 0 to 999172202496
[ 27.075301] md2: unknown partition table
[ 27.332238] device-mapper: uevent: version 1.0.3
[ 27.339717] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 27.509207] kjournald starting. Commit interval 5 seconds
[ 27.514776] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.603054] udev[196]: starting version 164
[ 29.040458] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 29.297606] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 29.304326] mv643xx_eth smi: probed
[ 29.326156] usbcore: Unknown symbol current_is_keventd
[ 29.332136] usbcore: Unknown symbol add_device_randomness
[ 29.381591] net eth0: port 0 with MAC address 00:08:9b:c0:da:a1
[ 30.422949] Adding 488144k swap on /dev/sda5. Priority:-1 extents:1
across:488144k
[ 30.438974] Adding 488144k swap on /dev/sdb5. Priority:-2 extents:1
across:488144k
[ 30.643725] EXT3 FS on md1, internal journal
[ 30.942044] loop: module loaded
[ 33.825666] kjournald starting. Commit interval 5 seconds
[ 33.873752] EXT3 FS on dm-3, internal journal
[ 33.878151] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.900191] kjournald starting. Commit interval 5 seconds
[ 33.906331] EXT3 FS on dm-2, internal journal
[ 33.910728] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.942959] kjournald starting. Commit interval 5 seconds
[ 33.949118] EXT3 FS on dm-0, internal journal
[ 33.953539] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.982274] kjournald starting. Commit interval 5 seconds
[ 34.023714] EXT3 FS on dm-1, internal journal
[ 34.028108] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.882253] NET: Registered protocol family 10
[ 36.175888] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.565047] RPC: Registered udp transport module.
[ 36.569781] RPC: Registered tcp transport module.
[ 36.574649] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.764652] Slow work thread pool: Starting up
[ 36.780822] Slow work thread pool: Ready
[ 36.786242] FS-Cache: Loaded
[ 36.986029] FS-Cache: Netfs 'nfs' registered for caching
[ 37.165030] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 37.626579] fuse init (API version 7.13)
[ 38.220696] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.445300] nf_conntrack version 0.5.0 (3994 buckets, 15976 max)
[ 38.455583] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 38.463095] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 38.471130] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 38.865673] svc: failed to register lockdv1 RPC service (errno 97).
[ 38.907399] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 38.947449] NFSD: starting 90-second grace period
[ 39.351008] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 39.358101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.581825] FW-INP IN=eth0 OUT=
MAC=00:08:9b:c0:da:a1:00:04:ed:dc:26:4c:08:00 SRC=208.67.220.220
DST=192.168.3.96 LEN=51 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=53
DPT=53242 LEN=31
[ 39.599084] FW-INP IN=eth0 OUT=
MAC=00:08:9b:c0:da:a1:00:04:ed:dc:26:4c:08:00 SRC=208.67.222.222
DST=192.168.3.96 LEN=51 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=53
DPT=55869 LEN=31
[ 50.343293] eth0: no IPv6 routers present
[ 365.043708] usbcore: Unknown symbol current_is_keventd
[ 365.049776] usbcore: Unknown symbol add_device_randomness
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : QNAP TS-119/TS-219
Revision : 0000
** Loaded modules:
Module Size Used by
ipt_MASQUERADE 1464 0
xt_multiport 2341 0
xt_tcpudp 2129 0
nf_conntrack_irc 2757 0
nf_conntrack_ftp 4998 0
xt_state 1125 0
xt_limit 1442 0
ipt_LOG 4585 0
iptable_nat 4305 0
nf_nat 13025 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 10003 3 iptable_nat,nf_nat
nf_conntrack 49371 7
ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 945 1 nf_conntrack_ipv4
iptable_filter 2012 0
ip_tables 9004 2 iptable_nat,iptable_filter
x_tables 10753 8
ipt_MASQUERADE,xt_multiport,xt_tcpudp,xt_state,xt_limit,ipt_LOG,iptable_nat,ip_tables
fuse 51452 1
nfsd 247752 13
exportfs 3008 1 nfsd
nfs 270812 0
lockd 63197 2 nfsd,nfs
fscache 34161 1 nfs
nfs_acl 2277 2 nfsd,nfs
auth_rpcgss 33350 2 nfsd,nfs
sunrpc 171391 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipv6 253672 26
ext2 55355 1
loop 11435 0
hmac 2475 0
sha1_generic 1717 0
mv_cesa 9270 0
evdev 6582 1
mv643xx_eth 22574 0
nls_base 5367 0
libphy 14844 1 mv643xx_eth
aes_generic 32820 1 mv_cesa
gpio_keys 3074 0
inet_lro 5060 1 mv643xx_eth
ext3 111204 5
jbd 37738 1 ext3
mbcache 4860 2 ext2,ext3
dm_mod 56891 12
raid1 19757 3
md_mod 80506 4 raid1
sd_mod 31344 10
crc_t10dif 1106 1 sd_mod
sata_mv 24398 8
libata 137914 1 sata_mv
scsi_mod 124484 2 sd_mod,libata
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 6.0.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-46 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
pn firmware-linux-free <none> (no description available)
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood:
false
linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood:
true
--- End Message ---
--- Begin Message ---
On Wed, Feb 27, 2013 at 12:47:46PM +1100, Peter Barker wrote:
> Package: linux-2.6
> Version: 2.6.32-48squeeze1
> Severity: critical
> Justification: breaks unrelated software
>
> When try to insert usbcore module get message
> FATAL: Error inserting usbcore
> (/lib/modules/2.6.32-5-kirkwood/kernel/drivers/usb/core/usbcore.ko): Unknown
> symbol in module, or unknown parameter (see dmesg)
> syslog shows:
> kernel: [ 365.043708] usbcore: Unknown symbol current_is_keventd
> kernel: [ 365.049776] usbcore: Unknown symbol add_device_randomness
> So no modules depending on usb can load.
[...]
You didn't reboot, or you didn't install the new kernel in flash.
Ben.
--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus
--- End Message ---