-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Package: initscripts
Version: 2.88dsf-59.5
Severity: critical
When installing 2.88dsf-59.5 over 2.88dsf-59.4, the full installation
fails with the following message, leaving the system in a critical
state.
initscripts (2.88dsf-59.5) wird eingerichtet ...
/var/lib/dpkg/info/initscripts.postinst: 8: .: Can't open /lib/init/vars.sh
dpkg: Fehler beim Bearbeiten des Paketes initscripts (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2
zurück
Fehler traten auf beim Bearbeiten von:
initscripts
That error prevent all further installations.
Installating version 2.88dsf-59.4 solves the troubles.
- -- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.5.7 (SMP w/8 CPU cores)
Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages initscripts depends on:
ii coreutils 8.25-2
ii debianutils 4.7
ii lsb-base 9.20160601
ii mount 2.28-5
ii sysv-rc 2.88dsf-59.5
ii sysvinit-utils 2.88dsf-59.4
Versions of packages initscripts recommends:
ii e2fsprogs 1.43.1-1
ii psmisc 22.21-2.1+b1
initscripts suggests no packages.
- -- Configuration Files:
/etc/default/rcS changed:
DELAYLOGIN=yes
VERBOSE=yes
/etc/init.d/checkroot.sh changed:
PATH=/sbin:/bin:/usr/bin
FSCK_LOGFILE=/var/log/fsck/checkroot
[ "$FSCKFIX" ] || FSCKFIX=no
[ "$SULOGIN" ] || SULOGIN=no
. /lib/init/vars.sh
. /lib/lsb/init-functions
. /lib/init/mount-functions.sh
do_start () {
# Trap SIGINT so that we can handle user interrupt of fsck.
trap "" INT
#
# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to
# be spawned from this script *before anything else* with a timeout,
# like sysv does.
#
[ "$SULOGIN" = yes ] && sulogin -t 30 $CONSOLE
KERNEL="$(uname -s)"
MACHINE="$(uname -m)"
read_fstab
#
# Activate the swap device(s) in /etc/fstab. This needs to be done
# before fsck, since fsck can be quite memory-hungry.
#
ENABLE_SWAP=no
case "$KERNEL" in
Linux)
if [ "$NOSWAP" = yes ]
then
[ "$VERBOSE" = no ] || log_warning_msg "Not activating
swap as requested via bootoption noswap."
ENABLE_SWAP=no
else
if [ "$swap_on_lv" = yes ]
then
[ "$VERBOSE" = no ] || log_warning_msg "Not
activating swap on logical volume."
elif [ "$swap_on_file" = yes ]
then
[ "$VERBOSE" = no ] || log_warning_msg "Not
activating swap on swapfile."
else
ENABLE_SWAP=yes
fi
fi
;;
*)
ENABLE_SWAP=yes
;;
esac
if [ "$ENABLE_SWAP" = yes ]
then
if [ "$VERBOSE" = no ]
then
log_action_begin_msg "Activating swap"
swapon -a -e >/dev/null 2>&1
log_action_end_msg $?
else
log_daemon_msg "Activating swap"
swapon -a -v
log_end_msg $?
fi
fi
#
# Does the root device in /etc/fstab match with the actual device ?
# If not we try to use the /dev/root alias device, and if that
# fails we create a temporary node in /run.
#
# Do this only on Linux. Neither kFreeBSD nor Hurd have
# /dev/root and the device ids used here are specific to
# Linux.
KERNEL="$(uname)"
if [ "$rootcheck" = yes ] && [ "$KERNEL" = Linux ]
then
ddev="$(mountpoint -qx $rootdev)"
rdev="$(mountpoint -d /)"
if [ "$ddev" != "$rdev" ] && [ "$ddev" != "4:0" ]
then
if [ "$(mountpoint -qx /dev/root)" = "4:0" ]
then
rootdev=/dev/root
else
if \
rm -f /run/rootdev \
&& mknod -m 600 /run/rootdev b
${rdev%:*} ${rdev#*:} \
&& [ -e /run/rootdev ]
then
rootdev=/run/rootdev
else
rootfatal=yes
fi
fi
fi
fi
#
# Bother, said Pooh.
#
if [ "$rootfatal" = yes ]
then
log_failure_msg "The device node $rootdev for the root
filesystem is missing or incorrect
or there is no entry for the root filesystem listed in /etc/fstab.
The system is also unable to create a temporary node in /run.
This means you have to fix the problem manually."
log_warning_msg "A maintenance shell will now be started.
CONTROL-D will terminate this shell and restart the system."
# Start a single user shell on the console
if ! sulogin $CONSOLE
then
log_failure_msg "Attempt to start maintenance shell
failed.
Will restart in 5 seconds."
sleep 5
fi
[ "$VERBOSE" = no ] || log_action_msg "Will now restart"
reboot -f
fi
# See if we're on AC Power. If not, we're not gonna run our
# check. If on_ac_power (in /usr/) is unavailable, behave as
# before and check all file systems needing it.
#
# See if we want to check the root file system.
#
FSCKCODE=0
if [ -e /run/initramfs/fsck-root ]
then
rootcheck=no
fi
if is_fastboot_active
then
[ "$rootcheck" = yes ] && log_warning_msg "Fast boot enabled,
so skipping root file system check."
rootcheck=no
fi
#if which findmnt >/dev/null 2>&1
#then
# if [ "$(findmnt -f -n -o FSTYPE /)" = "btrfs" ]
# then
# [ "$rootcheck" = yes ] && log_warning_msg "btrfs root
detected, so skipping root file system check."
# rootcheck=no
# fi
#fi
if [ "$rootcheck" = yes ]
then
#
# Ensure that root is quiescent and read-only before fsck'ing.
#
# mount -n -o remount,ro / would be the correct syntax but
# mount can get confused when there is a "bind" mount defined
# in fstab that bind-mounts "/" somewhere else.
#
# So we use mount -n -o remount,ro $rootdev / but that can
# fail on older kernels on sparc64/alpha architectures due
# to a bug in sys_mount().
#
# As a compromise we try both.
#
if \
! mount -n -o remount,ro $rootdev /
\
&& ! mount -n -o remount,ro -t dummytype $rootdev /
2>/dev/null \
&& ! mount -n -o remount,ro /
2>/dev/null
then
log_failure_msg "Cannot check root file system because
it is not mounted read-only."
rootcheck=no
fi
fi
#
# The actual checking is done here.
#
if [ "$rootcheck" = yes ]
then
if [ -f /forcefsck ] || grep -q -s -w -i "forcefsck"
/proc/cmdline
then
force="-f"
else
force=""
fi
if [ "$FSCKFIX" = yes ]
then
fix="-y"
else
fix="-a"
fi
spinner="-C"
case "$TERM" in
dumb|network|unknown|"")
spinner="" ;;
esac
# This Linux/s390x special case should go away.
if [ "${KERNEL}:${MACHINE}" = Linux:s390x ]
then
spinner=""
fi
if [ "$VERBOSE" = no ]
then
log_action_begin_msg "Checking root file system"
logsave -s $FSCK_LOGFILE fsck $spinner $force $fix -t
$roottype $rootdev
FSCKCODE=$?
if [ "$FSCKCODE" = 0 ]
then
log_action_end_msg 0
else
log_action_end_msg 1 "code $FSCKCODE"
fi
else
log_daemon_msg "Will now check root file system"
logsave -s $FSCK_LOGFILE fsck $spinner $force $fix -V
-t $roottype $rootdev
FSCKCODE=$?
log_end_msg $FSCKCODE
fi
fi
#
# If there was a failure, drop into single-user mode.
#
# NOTE: "failure" is defined as exiting with a return code of
# 4 or larger. A return code of 1 indicates that file system
# errors were corrected but that the boot may proceed. A return
# code of 2 or 3 indicates that the system should immediately reboot.
#
if [ "$FSCKCODE" -eq 32 ]
then
log_warning_msg "File system check was interrupted by user"
elif [ "$FSCKCODE" -gt 3 ]
then
# Surprise! Re-directing from a HERE document (as in "cat <<
EOF")
# does not work because the root is currently read-only.
log_failure_msg "An automatic file system check (fsck) of the
root filesystem failed.
A manual fsck must be performed, then the system restarted.
The fsck should be performed in maintenance mode with the
root filesystem mounted in read-only mode."
log_warning_msg "The root filesystem is currently mounted in
read-only mode.
A maintenance shell will now be started.
After performing system maintenance, press CONTROL-D
to terminate the maintenance shell and restart the system."
# Start a single user shell on the console
if ! sulogin $CONSOLE
then
log_failure_msg "Attempt to start maintenance shell
failed.
Will restart in 5 seconds."
sleep 5
fi
[ "$VERBOSE" = no ] || log_action_msg "Will now restart"
reboot -f
elif [ "$FSCKCODE" -gt 1 ]
then
log_failure_msg "The file system check corrected errors on the
root partition
but requested that the system be restarted."
log_warning_msg "The system will be restarted in 5 seconds."
sleep 5
[ "$VERBOSE" = no ] || log_action_msg "Will now restart"
reboot -f
fi
#
# Remount root to final mode (rw or ro).
#
# See the comments above at the previous "mount -o remount"
# for an explanation why we try this twice.
#
if ! mount -n -o remount,$rootopts,$rootmode $fstabroot / 2>/dev/null
then
mount -n -o remount,$rootopts,$rootmode /
fi
# If possible, migrate /etc/mtab to be a symlink to
# /proc/mounts. Note that not all systems e.g. Hurd currently
# support this.
if [ "$rootmode" != "ro" ]; then
mtab_migrate
fi
if selinux_enabled && [ -x /sbin/restorecon ] && [ -r /etc/mtab ]
then
restorecon /etc/mtab
fi
#
# Remove /run/rootdev if we created it.
#
rm -f /run/rootdev
# Update mount options for mounts created in early boot
# S01mountkernfs.sh
/etc/init.d/mountkernfs.sh reload
# S03mountdevsubfs.sh
/etc/init.d/mountdevsubfs.sh reload
}
do_status () {
# If / is read-write or swap is enabled, this script have done
# its job.
rootrw=false
swapon=false
if [ -f /etc/mtab ] ; then
if grep " / " /etc/mtab |grep -q rw ; then
rootrw=true
fi
fi
if [ -f /proc/swaps ] ; then
if [ "$(cat /proc/swaps |grep -v ^Filename)" ] ; then
swapon=true
fi
fi
if [ true = "$rootrw" ] || [ true = "$swapon" ] ; then
return 0
else
return 4
fi
}
case "$1" in
start|"")
do_start
;;
restart|reload|force-reload)
echo "Error: argument '$1' not supported" >&2
exit 3
;;
stop)
# No-op
;;
status)
do_status
exit $?
;;
*)
echo "Usage: checkroot.sh [start|stop]" >&2
exit 3
;;
esac
:
- -- no debconf information
- --
Klaus Ethgen http://www.ethgen.ch/
pub 4096R/4E20AF1C 2011-05-16 Klaus Ethgen <kl...@ethgen.ch>
Fingerprint: 85D4 CA42 952C 949B 1753 62B3 79D0 B06F 4E20 AF1C
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
Comment: Charset: ISO-8859-1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=4B94
-----END PGP SIGNATURE-----
