Package: src:linux Version: 4.8.11-1 Severity: grave Justification: causes non-serious data loss
Dear Maintainer, The recent kernel update causes segfaults and system hanging when using graphical mode. Segfaults randomly occur to graphical apps, always occur to apps using hardware acceleration (e.g. chromium), occur under various DE (tried KDE, Fluxbox). Segfaults never occur in text terminal mode. However, when I boot into 4.8.0-1 or earlier versions, the system works flawlessly, including hardware acceleration. I'll be glad to provide any additional information. Thanks. -- Package-specific info: ** Version: Linux version 4.8.0-2-amd64 (debian-ker...@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1 (2016-12-02) ** Command line: BOOT_IMAGE=/vmlinuz-4.8.0-2-amd64 root=UUID=7d081ac6-a56b-49a4-8afc-658cb48fc974 ro single resume=/dev/mapper/wd-swap ** Tainted: OE (12288) * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: [ 6.865521] it87: Beeping is supported [ 6.871580] Loading iSCSI transport class v2.0-870. [ 6.880628] iscsi: registered transport (tcp) [ 6.912687] iscsi: registered transport (iser) [ 7.010766] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 7.012362] ACPI: Power Button [PWRB] [ 7.014189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.016262] ACPI: Power Button [PWRF] [ 7.020242] acpi_cpufreq: overriding BIOS provided _PSD data [ 7.027987] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.039831] wmi: Mapper loaded [ 7.063462] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.065638] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.067853] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 7.070203] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 7.072827] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 7.075388] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 7.080628] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 7.083422] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 7.085055] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42 [ 7.085488] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 7.085571] sd 7:0:0:1: Attached scsi generic sg8 type 0 [ 7.085696] sd 7:0:0:2: Attached scsi generic sg9 type 0 [ 7.085946] sd 7:0:0:3: Attached scsi generic sg10 type 0 [ 7.094338] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 7.095738] sp5100_tco: Last reboot was not triggered by watchdog. [ 7.098515] sp5100_tco: initialized (0xffffa90f80e6cb00). heartbeat=60 sec (nowayout=0) [ 7.124534] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input6 [ 7.128612] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 7.130123] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.131644] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.133145] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 7.134637] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 7.136125] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 7.141568] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 7.143094] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 7.144545] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 7.158656] random: crng init done [ 7.168801] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 7.170315] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 7.171784] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 7.173249] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 7.174874] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 7.176365] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 7.177856] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 7.179407] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 7.199100] kvm: Nested Virtualization enabled [ 7.200849] kvm: Nested Paging enabled [ 7.340670] media: Linux media interface: v0.10 [ 7.349591] Linux video capture interface: v2.00 [ 7.364772] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a) [ 7.384328] uvcvideo 3-1:1.0: Entity type for entity Extension 4 was not initialized! [ 7.386372] uvcvideo 3-1:1.0: Entity type for entity Extension 6 was not initialized! [ 7.388353] uvcvideo 3-1:1.0: Entity type for entity Extension 7 was not initialized! [ 7.390327] uvcvideo 3-1:1.0: Entity type for entity Processing 2 was not initialized! [ 7.391761] uvcvideo 3-1:1.0: Entity type for entity Extension 3 was not initialized! [ 7.393191] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized! [ 7.394721] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0/input/input15 [ 7.396277] usbcore: registered new interface driver uvcvideo [ 7.397742] USB Video Class driver (1.1.1) [ 7.639363] ath: EEPROM regdomain: 0x809c [ 7.639375] ath: EEPROM indicates we should expect a country code [ 7.639378] ath: doing EEPROM country->regdmn map search [ 7.639380] ath: country maps to regdmn code: 0x52 [ 7.639382] ath: Country alpha2 being used: CN [ 7.639392] ath: Regpair used: 0x52 [ 7.657264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.657580] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffa90f81000000, irq=20 [ 7.742237] Adding 8388604k swap on /dev/mapper/wd-swap. Priority:-1 extents:1 across:8388604k FS [ 7.774859] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 8.136273] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 8.145468] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: acl [ 8.188901] systemd-journald[321]: Received request to flush runtime journal from PID 1 [ 8.303661] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 8.559437] usb 3-1: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. [ 8.565469] usb 3-1: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 [ 8.572190] usbcore: registered new interface driver snd-usb-audio [ 14.482629] vboxdrv: loading out-of-tree module taints kernel. [ 14.484803] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 14.490737] vboxdrv: Found 4 processor cores [ 14.510936] vboxdrv: TSC mode is Invariant, tentative frequency 2611552861 Hz [ 14.512756] vboxdrv: Successfully loaded version 5.1.12_Debian (interface 0x00280000) [ 14.520044] VBoxNetFlt: Successfully started. [ 14.531622] VBoxNetAdp: Successfully started. [ 14.541558] VBoxPciLinuxInit [ 14.547048] vboxpci: IOMMU not found (not registered) [ 15.152607] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.272925] r8169 0000:04:00.0 eth0: link down [ 15.272953] r8169 0000:04:00.0 eth0: link down [ 15.272999] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.278443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.888442] r8169 0000:04:00.0 eth0: link up [ 17.888486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.967788] systemd[1]: apt-daily.timer: Adding 10h 6.118413s random time. [ 21.619454] usb 3-1: reset high-speed USB device number 2 using ehci-pci [ 43.612113] kactivitymanage[1640]: segfault at 7f66492d1cb0 ip 00007f663802f701 sp 00007ffc15ec7e88 error 4 in libQt5Sql.so.5.7.1[7f6638019000+45000] [ 43.876541] akonadi_migrati[1819]: segfault at 8 ip 00007efcf2b729a1 sp 00007fff302dc880 error 4 in libQt5XcbQpa.so.5.7.1[7efcf2b38000+fa000] [ 43.927485] akonadi_newmail[1822]: segfault at 8 ip 00007f912ad9e9a1 sp 00007ffd8d64fec0 error 4 in libQt5XcbQpa.so.5.7.1[7f912ad64000+fa000] [ 43.946432] akonadi_maildir[1814]: segfault at 8 ip 00007fac6cc319a1 sp 00007ffd45f88100 error 4 in libQt5XcbQpa.so.5.7.1[7fac6cbf7000+fa000] [ 44.019610] akonadi_maildis[1815]: segfault at 8 ip 00007fdbf80219a1 sp 00007fff2f0177f0 error 4 in libQt5XcbQpa.so.5.7.1[7fdbf7fe7000+fa000] ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-880GMA-USB3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F4c board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-880GMA-USB3 board_version: ** Loaded modules: pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) binfmt_misc vboxdrv(OE) arc4 snd_usb_audio snd_usbmidi_lib uvcvideo snd_rawmidi snd_seq_device videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media joydev evdev ath9k ath9k_common ath9k_hw kvm_amd ath mac80211 kvm cfg80211 irqbypass snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic rfkill serio_raw k10temp snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep sp5100_tco snd_pcm_oss snd_mixer_oss snd_pcm snd_timer sg snd soundcore wmi shpchp acpi_cpufreq tpm_tis tpm_tis_core button tpm ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi it87 hwmon_vid parport_pc ppdev lp parport loop dm_crypt ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic uas usb_storage fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache hid_microsoft hid_generic usbhid hid dm_mod sr_mod cdrom sd_mod ohci_pci radeon i2c_piix4 ahci libahci r8169 mii libata xhci_pci scsi_mod xhci_hcd i2c_algo_bit drm_kms_helper ohci_hcd ehci_pci ttm ehci_hcd drm usbcore usb_common floppy fjes ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601] Subsystem: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 NUMA node: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 NUMA node: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd300000-fd4fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 24 NUMA node: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 25 NUMA node: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 26 NUMA node: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 NUMA node: 0 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Kernel modules: i2c_piix4, sp5100_tco 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA) [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 NUMA node: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 NUMA node: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 NUMA node: 0 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 17 NUMA node: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 17 NUMA node: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 Capabilities: <access denied> Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- NUMA node: 0 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4250] [1002:9715] (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd RS880 [Radeon HD 4250] [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at be00 [size=256] Region 2: Memory at fd4e0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fd300000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon Kernel modules: radeon 01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f] Subsystem: Gigabyte Technology Co., Ltd RS880 HDMI Audio [Radeon HD 4200 Series] [1458:960f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 19 NUMA node: 0 Region 0: Memory at fd4fc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 02:00.0 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at fd2ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci-pci Kernel modules: ohci_pci 02:00.1 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at fd2fe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 02:00.2 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at fd2fd000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci-pci Kernel modules: ohci_pci 02:00.3 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 NUMA node: 0 Region 0: Memory at fd2fc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 02:00.4 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 NUMA node: 0 Region 0: Memory at fd2fb000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci-pci Kernel modules: ohci_pci 02:00.5 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 NUMA node: 0 Region 0: Memory at fd2fa000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 02:00.6 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin D routed to IRQ 19 NUMA node: 0 Region 0: Memory at fd2f9000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci-pci Kernel modules: ohci_pci 02:00.7 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) Subsystem: Device [a000:4000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin D routed to IRQ 19 NUMA node: 0 Region 0: Memory at fd2f8000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 03:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 27 NUMA node: 0 Region 0: Memory at fdef8000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 28 NUMA node: 0 Region 0: I/O ports at ce00 [size=256] Region 2: Memory at fd9ff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fd9f8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:06.0 Network controller [0280]: Qualcomm Atheros AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] [168c:0023] (rev 01) Subsystem: Qualcomm Atheros AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] [168c:3071] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 20 NUMA node: 0 Region 0: Memory at fdbf0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub Bus 003 Device 003: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 046d:081a Logitech, Inc. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 003: ID 047d:1020 Kensington Expert Mouse Trackball Bus 010 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0 Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 017 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 016 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 015 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 014 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.8.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.8.0-2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.126 ii kmod 23-1 ii linux-base 4.5 Versions of packages linux-image-4.8.0-2-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.8.0-2-amd64 suggests: ii debian-kernel-handbook 1.0.17 ii extlinux 3:6.03+dfsg-14 ii grub-pc 2.02~beta3-3 pn linux-doc-4.8 <none> Versions of packages linux-image-4.8.0-2-amd64 is related to: ii firmware-amd-graphics 20161130-2 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20161130-2 ii firmware-misc-nonfree 20161130-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20161130-2 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information