Your message dated Mon, 13 Feb 2017 15:18:52 +0000
with message-id <e1cdioy-0001de...@fasolo.debian.org>
and subject line Bug#854616: fixed in gnupg2 2.1.18-5
has caused the Debian Bug report #854616,
regarding scdaemon cannot access yubikey using ccid driver without pcscd
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
854616: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854616
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: scdaemon
Version: 2.1.18-3
Severity: grave

In Bug#854005, I have described a distinct issue I have experience
with my Yubikey since the upgrade of the GnuPG suite from 2.1.17 to
2.1.18, and in the case of pcscd, from 1.8.19-1 to 1.8.20-1.

I am not sure what exactly is going on here. What I know is that I was
able to configure my Yubikey to work in Jessie with GnuPG using a
procedure I have documented here:

https://anarc.at/blog/2015-12-14-yubikey-howto/

After installing a new workstation with Debian stretch, things were
still working until the 2.1.18 release.

The symptom is this:

[996]anarcat@curie:~$ LANG=C gpg --card-status
gpg: selecting openpgp failed: No such device
gpg: OpenPGP card not available: No such device

At first, adding "disable-ccid" to scdaemon.conf fixes the issue. But
after a while, the behavior returns.

I have noticed that pcscd is gone when that happens. After advice
received in 854005, I have tried to uninstall pcscd to try and let
scdaemon handle the device. This also fails. Here's a trace of me
purging pcscd, restarting gpg-agent and trying to connect to the card.

[1001]anarcat@curie:~$ sudo apt purge pcscd
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
  libccid
Veuillez utiliser « sudo apt autoremove » pour le supprimer.
Les paquets suivants seront ENLEVÉS :
  pcscd*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 23 non mis à jour.
Après cette opération, 205 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] 
(Lecture de la base de données... 291154 fichiers et répertoires déjà 
installés.)
Suppression de pcscd (1.8.20-1) ...
Warning: Stopping pcscd.service, but it can still be activated by:
  pcscd.socket
Traitement des actions différées (« triggers ») pour man-db (2.7.6.1-2) ...
(Lecture de la base de données... 291142 fichiers et répertoires déjà 
installés.)
Purge des fichiers de configuration de pcscd (1.8.20-1) ...
Traitement des actions différées (« triggers ») pour systemd (232-15) ...
[master ab8bc2d] committing changes in /etc after apt run
 Author: Antoine Beaupré <anar...@debian.org>
 10 files changed, 155 deletions(-)
 delete mode 100755 init.d/pcscd
 delete mode 120000 rc0.d/K01pcscd
 delete mode 120000 rc1.d/K01pcscd
 delete mode 120000 rc2.d/S01pcscd
 delete mode 120000 rc3.d/S01pcscd
 delete mode 120000 rc4.d/S01pcscd
 delete mode 120000 rc5.d/S01pcscd
 delete mode 120000 rc6.d/K01pcscd
 delete mode 120000 systemd/system/sockets.target.wants/pcscd.socket
[1002]anarcat@curie:~$ systemctl --user stop gpg-agent
Warning: Stopping gpg-agent.service, but it can still be activated by:
  gpg-agent.socket
  gpg-agent-ssh.socket
  gpg-agent-extra.socket
  gpg-agent-browser.socket
[1003]anarcat@curie:~$ ps axf | grep gpg
27310 pts/4    S+     0:00                      \_ grep gpg
[1004]anarcat@curie:~$ LANG=C gpg --card-status
gpg: selecting openpgp failed: No such device
gpg: OpenPGP card not available: No such device

Here's the output proving gpg is stopped:

fév 08 12:22:09 curie systemd[1199]: Stopping GnuPG cryptographic agent and 
passphrase cache... 
fév 08 12:22:09 curie systemd[1199]: Stopped GnuPG cryptographic agent and 
passphrase cache. 
fév 08 12:22:09 curie gpg-agent[21736]: scdaemon[21738] SIGTERM received - 
shutting down ... 
fév 08 12:22:09 curie gpg-agent[21736]: SIGTERM received - shutting down ... 
fév 08 12:22:09 curie gpg-agent[21736]: gpg-agent (GnuPG) 2.1.18scdaemon[21738] 
scdaemon (GnuPG) 2.1.18 stopped 
fév 08 12:22:09 curie gpg-agent[21736]:  stopped

Here's the error when i try to access the card then:

fév 08 12:24:20 curie systemd[1199]: Started GnuPG cryptographic agent and 
passphrase cache. 
fév 08 12:24:20 curie gpg-agent[27960]: gpg-agent (GnuPG) 2.1.18 starting in 
supervised mode. 
fév 08 12:24:20 curie gpg-agent[27960]: using fd 3 for std socket 
(/run/user/1000/gnupg/S.gpg-agent) 
fév 08 12:24:20 curie gpg-agent[27960]: using fd 4 for ssh socket 
(/run/user/1000/gnupg/S.gpg-agent.ssh) 
fév 08 12:24:20 curie gpg-agent[27960]: using fd 5 for extra socket 
(/run/user/1000/gnupg/S.gpg-agent.extra) 
fév 08 12:24:20 curie gpg-agent[27960]: using fd 6 for browser socket 
(/run/user/1000/gnupg/S.gpg-agent.browser) 
fév 08 12:24:20 curie gpg-agent[27960]: listening on: std=3 extra=5 browser=6 
ssh=4 
fév 08 12:24:20 curie gpg-agent[27960]: scdaemon[27962] ccid open error: skip 

the scdaemon debug logs show this:

2017-02-08 12:24:58 scdaemon[27971] listening on socket 
'/run/user/1000/gnupg/S.scdaemon'
2017-02-08 12:24:58 scdaemon[27971] handler for fd -1 started
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> OK GNU Privacy Guard's 
Smartcard server ready
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 <- GETINFO socket_name
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> D 
/run/user/1000/gnupg/S.scdaemon
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> OK
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 <- OPTION event-signal=12
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> OK
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 <- GETINFO version
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> D 2.1.18
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> OK
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 <- SERIALNO openpgp
2017-02-08 12:24:58 scdaemon[27971] DBG: apdu_open_reader: BAI=11201
2017-02-08 12:24:58 scdaemon[27971] DBG: apdu_open_reader: new device=11201
2017-02-08 12:24:58 scdaemon[27971] ccid open error: skip
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> ERR 100696144 Aucun 
périphérique de ce type <SCD>
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 <- RESTART
2017-02-08 12:24:58 scdaemon[27971] DBG: chan_5 -> OK

Those were enabled with:

printf 'debug-all\nlog-file /run/user/%d/scdaemon.log\n' "$(id -u)" >> 
~/.gnupg/scdaemon.conf

If I reinstall pcscd and disable-ccid in scdaemon.conf, things work
again, for a while, until pcscd crashes again.

Here's a working run output:
[1017]anarcat@curie:~$ LANG=C gpg --card-status

Reader ...........: Yubico Yubikey NEO OTP CCID 00 00
Application ID ...: XXXXXXXXXXXXXXXXXXXXXxx
Version ..........: 2.0
Manufacturer .....: Yubico
Serial number ....: XXXXXXXXX
Name of cardholder: [not set]
Language prefs ...: [not set]
Sex ..............: unspecified
URL of public key : [not set]
Login data .......: [not set]
Signature PIN ....: forced
Key attributes ...: rsa2048 rsa2048 rsa2048
Max. PIN lengths .: 127 127 127
PIN retry counter : 3 3 3
Signature counter : 0
Signature key ....: [none]
Encryption key....: [none]
Authentication key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
      created ....: 2012-07-20 00:17:35
General key info..: sub  rsa2048/[...]

and here's what i get in syslog:

fév 08 12:27:06 curie systemd[1199]: Started GnuPG cryptographic agent and 
passphrase cache. 
fév 08 12:27:06 curie gpg-agent[28488]: gpg-agent (GnuPG) 2.1.18 starting in 
supervised mode. 
fév 08 12:27:06 curie gpg-agent[28488]: using fd 3 for std socket 
(/run/user/1000/gnupg/S.gpg-agent) 
fév 08 12:27:06 curie gpg-agent[28488]: using fd 4 for ssh socket 
(/run/user/1000/gnupg/S.gpg-agent.ssh) 
fév 08 12:27:06 curie gpg-agent[28488]: using fd 5 for extra socket 
(/run/user/1000/gnupg/S.gpg-agent.extra) 
fév 08 12:27:06 curie gpg-agent[28488]: using fd 6 for browser socket 
(/run/user/1000/gnupg/S.gpg-agent.browser) 
fév 08 12:27:06 curie gpg-agent[28488]: listening on: std=3 extra=5 browser=6 
ssh=4 
fév 08 12:27:06 curie gpg-agent[28488]: scdaemon[28490] enabled debug flags: 
mpi crypto memory cache memstat hashing ipc cardio reader 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie pcscd[28182]: 25900973 winscard.c:283:SCardConnect() 
Error Reader Exclusive 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 
ep 4 with no TDs queued? 
fév 08 12:27:06 curie gpg-agent[28488]: card has S/N: 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 

I haven't figured out what happens when pcscd crashes - i couldn't
find anything in the syslog or anywhere.

I get this error from scdaemon:

fév 06 19:45:29 curie gpg-agent[1643]: scdaemon[1645] pcsc_establish_context 
failed: no service (0x8010001d) 

... which is the same error as when pcscd is uninstalled - ie. it's
not running.

the reason why reinstalling pcscd fixes the issue for me is probably
that it resets the systemd configuration for the daemon and
reinstalling restarts it properly.

now it is running - but who knows for how long?

● pcscd.service - PC/SC Smart Card Daemon
   Loaded: loaded (/lib/systemd/system/pcscd.service; indirect; vendor preset: 
enabled)
   Active: active (running) since Wed 2017-02-08 10:12:36 EST; 4min 1s ago
 Main PID: 14439 (pcscd)
   CGroup: /system.slice/pcscd.service
           └─14439 /usr/sbin/pcscd --foreground --auto-exit

It seems that I need to do this reset thing every morning now, so I
guess it's crashing at least every 24 hours. i have tried unplugging
and replugging the yubikey, it doesn't trigger the problem.

i have tried to figure out what may have happened by looking at the
journald logs, but i can't figure it out. it doesn't clearly mention a
crash.

notice, in the log below, that i reinstalled the package at around Feb
08 10:12:36, which is when things went back to normal. yet before that,
it's unclear what problem there was. you can certainly see a few
instances where systemd started pcscd without  it being stopped
first... so there's definitely something going on there.

anything i can do to improve debugging here? note that I don't *need*
pcscd at all. i don't actually know what it is or what it's for. just
want this yubikey to work reliably. :)

[1021]anarcat@curie:~$ sudo LANG=C journalctl -u pcscd.service| cat
-- Logs begin at Sat 2017-02-04 11:17:15 EST, end at Wed 2017-02-08 12:32:43 
EST. --
Feb 04 12:33:58 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 04 12:33:58 curie pcscd[8947]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 04 12:33:58 curie pcscd[8947]: 00000012 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/007)
Feb 04 12:33:58 curie pcscd[8947]: 00000002 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 04 12:33:58 curie pcscd[8947]: 00341712 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 04 12:44:42 curie pcscd[8947]: 99999999 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 04 12:44:45 curie pcscd[8947]: 03512295 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 04 13:26:51 curie pcscd[8947]: 99999999 ccid_usb.c:797:WriteUSB() write 
failed (1/7): -4 LIBUSB_ERROR_NO_DEVICE
Feb 04 17:28:58 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 04 17:29:16 curie pcscd[31517]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 04 17:29:16 curie pcscd[31517]: 00000014 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/008)
Feb 04 17:29:16 curie pcscd[31517]: 00000003 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 04 17:53:08 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 04 17:53:08 curie pcscd[1915]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 04 17:53:08 curie pcscd[1915]: 00000018 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/008)
Feb 04 17:53:08 curie pcscd[1915]: 00000002 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 04 17:53:09 curie pcscd[1915]: 00860385 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 04 18:10:35 curie pcscd[1915]: 99999999 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 04 18:27:49 curie pcscd[1915]: 99999999 ccid_usb.c:1337:InterruptStop() 
libusb_cancel_transfer failed: -4
Feb 04 18:27:49 curie pcscd[1915]: 00400400 ccid_usb.c:797:WriteUSB() write 
failed (1/8): -4 LIBUSB_ERROR_NO_DEVICE
Feb 06 10:55:09 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 06 10:55:09 curie pcscd[20263]: 00000000 utils.c:82:GetDaemonPid() Can't 
open /var/run/pcscd/pcscd.pid: No such file or directory
Feb 06 10:55:09 curie pcscd[20263]: 00007301 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 06 10:55:09 curie pcscd[20263]: 00000009 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/010)
Feb 06 10:55:09 curie pcscd[20263]: 00000003 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 06 11:07:17 curie pcscd[20263]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 06 12:13:37 curie pcscd[20263]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 06 12:13:52 curie pcscd[20263]: 15281542 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 06 18:27:32 curie pcscd[20263]: 99999999 ccid_usb.c:797:WriteUSB() write 
failed (1/10): -4 LIBUSB_ERROR_NO_DEVICE
Feb 06 19:48:27 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 06 19:48:27 curie pcscd[3100]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 06 19:48:27 curie pcscd[3100]: 00000014 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/013)
Feb 06 19:48:27 curie pcscd[3100]: 00000003 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 06 19:48:49 curie pcscd[3100]: 22045135 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 19:49:15 curie pcscd[3100]: 26297901 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 19:49:56 curie pcscd[3100]: 41260039 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 19:50:06 curie pcscd[3100]: 09673127 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 19:51:25 curie pcscd[3100]: 78500770 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 20:22:55 curie pcscd[3100]: 99999999 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 20:23:00 curie pcscd[3100]: 04869977 winscard.c:283:SCardConnect() Error 
Reader Exclusive
Feb 06 20:30:37 curie pcscd[3100]: 99999999 ccid_usb.c:797:WriteUSB() write 
failed (1/13): -4 LIBUSB_ERROR_NO_DEVICE
Feb 07 20:55:56 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 07 20:55:56 curie pcscd[21376]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 07 20:55:56 curie pcscd[21376]: 00000012 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/015)
Feb 07 20:55:56 curie pcscd[21376]: 00000004 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 07 20:56:02 curie pcscd[21376]: 05648900 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 20:56:12 curie pcscd[21376]: 09655699 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 20:56:36 curie pcscd[21376]: 24217358 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 21:06:59 curie pcscd[21376]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 21:08:03 curie pcscd[21376]: 63425592 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 22:01:33 curie pcscd[21376]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 07 22:27:31 curie pcscd[21376]: 99999999 ccid_usb.c:797:WriteUSB() write 
failed (1/15): -4 LIBUSB_ERROR_NO_DEVICE
Feb 08 10:12:36 curie systemd[1]: Started PC/SC Smart Card Daemon.
Feb 08 10:12:36 curie pcscd[14439]: 00000000 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 08 10:12:36 curie pcscd[14439]: 00000014 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/016)
Feb 08 10:12:36 curie pcscd[14439]: 00000003 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 08 10:13:10 curie pcscd[14439]: 33826818 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 08 10:17:53 curie pcscd[14439]: 99999999 ccid_usb.c:797:WriteUSB() write 
failed (1/16): -4 LIBUSB_ERROR_NO_DEVICE
Feb 08 10:17:58 curie pcscd[14439]: 04993454 
ifdhandler.c:151:CreateChannelByNameOrChannel() failed
Feb 08 10:17:58 curie pcscd[14439]: 00000012 
readerfactory.c:1110:RFInitializeReader() Open Port 0x200000 Failed 
(usb:1050/0111:libudev:0:/dev/bus/usb/001/017)
Feb 08 10:17:58 curie pcscd[14439]: 00000004 readerfactory.c:375:RFAddReader() 
Yubico Yubikey NEO OTP+CCID init failed.
Feb 08 10:18:11 curie pcscd[14439]: 12507788 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 08 10:47:48 curie pcscd[14439]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive
Feb 08 11:00:00 curie pcscd[14439]: 99999999 winscard.c:283:SCardConnect() 
Error Reader Exclusive

-- System Information:
Debian Release: 9.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages scdaemon depends on:
ii  gnupg-agent    2.1.18-3
ii  libassuan0     2.4.3-2
ii  libc6          2.24-9
ii  libgcrypt20    1.7.6-1
ii  libgpg-error0  1.26-2
ii  libksba8       1.3.5-2
ii  libnpth0       1.3-1
ii  libusb-1.0-0   2:1.0.21-1

scdaemon recommends no packages.

scdaemon suggests no packages.

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: gnupg2
Source-Version: 2.1.18-5

We believe that the bug you reported is fixed in the latest version of
gnupg2, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 854...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Daniel Kahn Gillmor <d...@fifthhorseman.net> (supplier of updated gnupg2 
package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Mon, 13 Feb 2017 09:15:07 -0500
Source: gnupg2
Binary: gnupg-agent scdaemon gpgsm gnupg gnupg2 gpgv gpgv2 dirmngr gpgv-udeb 
gpgv-static gpgv-win32 gnupg-l10n
Architecture: source
Version: 2.1.18-5
Distribution: unstable
Urgency: medium
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-ma...@lists.alioth.debian.org>
Changed-By: Daniel Kahn Gillmor <d...@fifthhorseman.net>
Description:
 dirmngr    - GNU privacy guard - network certificate management service
 gnupg      - GNU privacy guard - a free PGP replacement
 gnupg-agent - GNU privacy guard - cryptographic agent
 gnupg-l10n - GNU privacy guard - localization files
 gnupg2     - GNU privacy guard - a free PGP replacement (dummy transitional pa
 gpgsm      - GNU privacy guard - S/MIME version
 gpgv       - GNU privacy guard - signature verification tool
 gpgv-static - minimal signature verification tool (static build)
 gpgv-udeb  - minimal signature verification tool (udeb)
 gpgv-win32 - GNU privacy guard - signature verification tool (win32 build)
 gpgv2      - GNU privacy guard - signature verification tool (dummy transition
 scdaemon   - GNU privacy guard - smart card support
Closes: 648331 734889 852702 854005 854595 854616
Changes:
 gnupg2 (2.1.18-5) unstable; urgency=medium
 .
   [ Daniel Kahn Gillmor ]
   * Xsession.d/90gpg-agent: use simpler and more direct gpgconf
     invocations for socket names.
 .
   [ NIIBE Yutaka ]
   * scdaemon.udev: Add Yubikey and Nitrokey (Closes: #648331, 734889).
   * scdaemon fix for PC/SC (Closes: #852702, #854005, #854595, #854616).
Checksums-Sha1:
 7107ae53a9a7b92c96abd2189b34a0d9cd1fba99 3148 gnupg2_2.1.18-5.dsc
 b31b7f97466e99c49c4eb9320b6df12d32d87e78 67321 gnupg2_2.1.18-5.debian.tar.bz2
 a1c521fc8bf43272c59490065eef86cecf06821d 9975 gnupg2_2.1.18-5_source.buildinfo
Checksums-Sha256:
 8eb4d1d8bb97ac770e8f50e558046981fd6f1fea169ae5e74ac959a6d033a35d 3148 
gnupg2_2.1.18-5.dsc
 e6dbc03c9a163baff078a47b0f7c023d8b830f80bf6ae486e6a580fbdb71d9c2 67321 
gnupg2_2.1.18-5.debian.tar.bz2
 e24155aeaccd93a834ace33df252d57538679afff471235bb770af4140365ec8 9975 
gnupg2_2.1.18-5_source.buildinfo
Files:
 cffe62364ca47384f8347317a5d1a673 3148 utils optional gnupg2_2.1.18-5.dsc
 950b349fb8ed2ee14a00155da3ae2650 67321 utils optional 
gnupg2_2.1.18-5.debian.tar.bz2
 f39a698baf6d532deab22cb867f3a4b3 9975 utils optional 
gnupg2_2.1.18-5_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=fpGR
-----END PGP SIGNATURE-----

--- End Message ---

Reply via email to