--- Begin Message ---
Package: pulseaudio
Version: 5.0-4
Severity: normal
I haven't notices when exactly does this happen, but after a while,
I see a /.config directory with pulseaudio config inside. Happens
on at least two different machines with slightly different versions
and different configurations.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.12-1-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/mksh
Versions of packages pulseaudio depends on:
ii adduser 3.112+nmu1
ii libasound2 1.0.27.2-3
ii libasound2-plugins 1.0.24-2
ii libc6 2.19-13
ii libcap2 1:2.24-6
ii libdbus-1-3 1.6.18-1
ii libfftw3-single3 3.3.3-5
ii libgcc1 1:4.9.2-7
ii libice6 2:1.0.5-1
ii libltdl7 2.4.2-1
ii liborc-0.4-0 1:0.4.21-1
ii libpulse0 5.0-4
ii libsamplerate0 0.1.7-2
ii libsm6 2:1.1.0-2
ii libsndfile1 1.0.25-9
ii libspeexdsp1 1.2~rc1-1
ii libstdc++6 4.9.2-7
ii libsystemd-login0 208-6
ii libtdb1 1.2.12-1
ii libudev1 215-10
ii libwebrtc-audio-processing-0 0.1-2
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.4.1-4
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.1.0-3
ii lsb-base 4.1+Debian13
ii pulseaudio-utils 5.0-4
ii udev 215-10
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 5.0-4
pn rtkit <none>
Versions of packages pulseaudio suggests:
ii paman 0.9.4-1
pn paprefs <none>
ii pavucontrol 2.0-3
ii pavumeter 0.9.3-4
-- Configuration Files:
/etc/pulse/default.pa changed:
..nofail
..fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop
..ifexists module-udev-detect.so
..else
load-module module-detect
..endif
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
..ifexists module-x11-publish.so
load-module module-x11-publish
..endif
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
# resample-method defaults to speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
#load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
#.ifexists module-console-kit.so
#load-module module-console-kit
#.endif
#.ifexists module-systemd-login.so
#load-module module-systemd-login
#.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
..ifexists module-x11-publish.so
#.nofail
load-module module-x11-publish
#.fail
..endif
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, 92HD81B1X5 Analog
Default Audio Device
sysdefault:CARD=Intel
HDA Intel, 92HD81B1X5 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, 92HD81B1X5 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
hdmi:CARD=Intel,DEV=1
HDA Intel, HDMI 1
HDMI Audio Output
hdmi:CARD=Intel,DEV=2
HDA Intel, HDMI 2
HDMI Audio Output
default:CARD=pcsp
pcsp, pcsp
Default Audio Device
sysdefault:CARD=pcsp
pcsp, pcsp
Default Audio Device
front:CARD=pcsp,DEV=0
pcsp, pcsp
Front speakers
bug-pulseaudio-pactl_list_cards.8fI9Pl
Description: inode/empty
Sink #0
State: SUSPENDED
Name: alsa_output.dmix
Description: Built-in Audio
Driver: module-alsa-sink.c
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.dmix.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD81B1X5 Analog"
alsa.id = "92HD81B1X5 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf5460000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b57"
device.product.name = "5 Series/3400 Series Chipset High
Definition Audio"
device.form_factor = "internal"
device.string = "dmix"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "8192"
device.access_mode = "mmap+timer"
device.description = "Built-in Audio"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.dmix.monitor
Description: Monitor of Built-in Audio
Driver: module-alsa-sink.c
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.dmix
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.dsnoop
Description: Built-in Audio
Driver: module-alsa-source.c
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD81B1X5 Analog"
alsa.id = "92HD81B1X5 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf5460000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b57"
device.product.name = "5 Series/3400 Series Chipset High
Definition Audio"
device.form_factor = "internal"
device.string = "dsnoop"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "8192"
device.access_mode = "mmap+timer"
device.description = "Built-in Audio"
device.icon_name = "audio-input-microphone-pci"
Formats:
pcm
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-alsa-sink
Argument: device=dmix
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Sink"
module.version = "5.0"
Module #6
Name: module-alsa-source
Argument: device=dsnoop
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Source"
module.version = "5.0"
Module #7
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #8
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "5.0"
Module #9
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "5.0"
Module #10
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "5.0"
Module #11
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "5.0"
Module #12
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "5.0"
Module #13
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #14
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "5.0"
Module #15
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #16
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "5.0"
Module #17
Name: module-x11-publish
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "5.0"
Server String: unix:/tmp/pulse-2L9K88eMlGn7/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 29
Tile Size: 65496
User Name: andrew
Host Name: ileemo
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.dmix
Default Source: alsa_input.dsnoop
Cookie: 989d:c5a8
--- End Message ---