Source: scalapack Version: 2.1.0-4 Severity: serious Justification: FTBFS on amd64 Tags: bullseye sid ftbfs Usertags: ftbfs-20201226 ftbfs-bullseye
Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part (hopefully): > make[2]: Entering directory '/<<PKGBUILDDIR>>/build-openmpi' > Running tests... > /usr/bin/ctest --force-new-ctest-process -j4 > Test project /<<PKGBUILDDIR>>/build-openmpi > Start 1: xCbtest > Start 2: xFbtest > Start 3: spb1tst > Start 4: dpb1tst > 1/96 Test #4: dpb1tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01450] [[25943,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 5: cpb1tst > 2/96 Test #2: xFbtest ..........................***Failed 0.04 sec > Running BLACS TESTS > -- /usr/bin/mpiexec -n 4 --allow-run-as-root --oversubscribe ./xFbtest > -- Output out_xFbtest.txt > -- Error in error_xFbtest.txt > [ip-172-31-9-140:01451] [[25942,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > CMake Error at /<<PKGBUILDDIR>>/BLACS/TESTING/runtest.cmake:22 (message): > Test failed - Test did not reach DONE BLACS_GRIDEXIT > > > > Start 6: zpb1tst > 3/96 Test #1: xCbtest ..........................***Failed 0.04 sec > Running BLACS TESTS > -- /usr/bin/mpiexec -n 4 --allow-run-as-root --oversubscribe ./xCbtest > -- Output out_xCbtest.txt > -- Error in error_xCbtest.txt > [ip-172-31-9-140:01452] [[25937,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > CMake Error at /<<PKGBUILDDIR>>/BLACS/TESTING/runtest.cmake:22 (message): > Test failed - Test did not reach DONE BLACS_GRIDEXIT > > > > Start 7: spb2tst > 4/96 Test #3: spb1tst ..........................***Failed 0.05 sec > [ip-172-31-9-140:01449] [[25940,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 8: dpb2tst > 5/96 Test #6: zpb1tst ..........................***Failed 0.02 sec > [ip-172-31-9-140:01456] [[25933,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 9: cpb2tst > 6/96 Test #5: cpb1tst ..........................***Failed 0.04 sec > [ip-172-31-9-140:01453] [[25936,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 10: zpb2tst > 7/96 Test #7: spb2tst ..........................***Failed 0.04 sec > [ip-172-31-9-140:01457] [[25932,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 11: spb3tst > 8/96 Test #8: dpb2tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01458] [[25935,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 12: dpb3tst > 9/96 Test #10: zpb2tst ..........................***Failed 0.02 sec > [ip-172-31-9-140:01460] [[25929,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 13: cpb3tst > 10/96 Test #9: cpb2tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01459] [[25934,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 14: zpb3tst > 11/96 Test #12: dpb3tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01462] [[25931,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 15: spb1tim > 12/96 Test #11: spb3tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01461] [[25928,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 16: dpb1tim > 13/96 Test #14: zpb3tst ..........................***Failed 0.03 sec > [ip-172-31-9-140:01464] [[25925,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 17: cpb1tim > 14/96 Test #13: cpb3tst ..........................***Failed 0.04 sec > [ip-172-31-9-140:01463] [[25930,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 18: zpb1tim > 15/96 Test #15: spb1tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01465] [[25924,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 19: spb2tim > 16/96 Test #16: dpb1tim ..........................***Failed 0.02 sec > [ip-172-31-9-140:01466] [[25927,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 20: dpb2tim > 17/96 Test #18: zpb1tim ..........................***Failed 0.02 sec > [ip-172-31-9-140:01468] [[25921,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 21: cpb2tim > 18/96 Test #17: cpb1tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01467] [[25926,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 22: zpb2tim > 19/96 Test #20: dpb2tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01470] [[25923,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 23: spb3tim > 20/96 Test #19: spb2tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01469] [[25920,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 24: dpb3tim > 21/96 Test #21: cpb2tim ..........................***Failed 0.02 sec > [ip-172-31-9-140:01471] [[25922,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 25: cpb3tim > 22/96 Test #22: zpb2tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01472] [[25917,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 26: zpb3tim > 23/96 Test #23: spb3tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01473] [[25916,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 27: xslu > 24/96 Test #25: cpb3tim ..........................***Failed 0.02 sec > [ip-172-31-9-140:01475] [[25918,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 28: xdlu > 25/96 Test #24: dpb3tim ..........................***Failed 0.03 sec > [ip-172-31-9-140:01474] [[25919,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 29: xclu > 26/96 Test #26: zpb3tim ..........................***Failed 0.02 sec > [ip-172-31-9-140:01476] [[25913,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 30: xzlu > 27/96 Test #28: xdlu .............................***Failed 0.02 sec > [ip-172-31-9-140:01478] [[25915,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 31: xsdblu > 28/96 Test #29: xclu .............................***Failed 0.02 sec > [ip-172-31-9-140:01479] [[25914,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 32: xddblu > 29/96 Test #30: xzlu .............................***Failed 0.02 sec > [ip-172-31-9-140:01480] [[25909,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 33: xcdblu > 30/96 Test #27: xslu .............................***Failed 0.04 sec > [ip-172-31-9-140:01477] [[25912,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 34: xzdblu > 31/96 Test #33: xcdblu ...........................***Failed 0.02 sec > [ip-172-31-9-140:01483] [[25910,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 35: xsdtlu > 32/96 Test #32: xddblu ...........................***Failed 0.03 sec > [ip-172-31-9-140:01482] [[25911,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 36: xddtlu > 33/96 Test #34: xzdblu ...........................***Failed 0.02 sec > [ip-172-31-9-140:01484] [[25905,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 37: xcdtlu > 34/96 Test #31: xsdblu ...........................***Failed 0.04 sec > [ip-172-31-9-140:01481] [[25908,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 38: xzdtlu > 35/96 Test #36: xddtlu ...........................***Failed 0.02 sec > [ip-172-31-9-140:01486] [[25907,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 39: xsgblu > 36/96 Test #37: xcdtlu ...........................***Failed 0.02 sec > [ip-172-31-9-140:01487] [[25906,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 40: xdgblu > 37/96 Test #35: xsdtlu ...........................***Failed 0.04 sec > [ip-172-31-9-140:01485] [[25904,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 41: xcgblu > 38/96 Test #38: xzdtlu ...........................***Failed 0.03 sec > [ip-172-31-9-140:01488] [[25901,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 42: xzgblu > 39/96 Test #40: xdgblu ...........................***Failed 0.03 sec > [ip-172-31-9-140:01490] [[25903,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 43: xsllt > 40/96 Test #41: xcgblu ...........................***Failed 0.03 sec > [ip-172-31-9-140:01491] [[25902,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 44: xdllt > 41/96 Test #42: xzgblu ...........................***Failed 0.03 sec > [ip-172-31-9-140:01492] [[25897,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 45: xcllt > 42/96 Test #39: xsgblu ...........................***Failed 0.04 sec > [ip-172-31-9-140:01489] [[25900,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 46: xzllt > 43/96 Test #43: xsllt ............................***Failed 0.03 sec > [ip-172-31-9-140:01493] [[25896,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 47: xspbllt > 44/96 Test #46: xzllt ............................***Failed 0.02 sec > [ip-172-31-9-140:01496] [[25893,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 48: xdpbllt > 45/96 Test #44: xdllt ............................***Failed 0.03 sec > [ip-172-31-9-140:01494] [[25899,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 49: xcpbllt > 46/96 Test #45: xcllt ............................***Failed 0.03 sec > [ip-172-31-9-140:01495] [[25898,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 50: xzpbllt > 47/96 Test #47: xspbllt ..........................***Failed 0.03 sec > [ip-172-31-9-140:01497] [[25892,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 51: xsptllt > 48/96 Test #49: xcpbllt ..........................***Failed 0.02 sec > [ip-172-31-9-140:01499] [[25894,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 52: xdptllt > 49/96 Test #48: xdpbllt ..........................***Failed 0.03 sec > [ip-172-31-9-140:01498] [[25895,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 53: xcptllt > 50/96 Test #50: xzpbllt ..........................***Failed 0.03 sec > [ip-172-31-9-140:01500] [[25889,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 54: xzptllt > 51/96 Test #52: xdptllt ..........................***Failed 0.02 sec > [ip-172-31-9-140:01502] [[25891,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 55: xsinv > 52/96 Test #51: xsptllt ..........................***Failed 0.03 sec > [ip-172-31-9-140:01501] [[25888,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 56: xdinv > 53/96 Test #53: xcptllt ..........................***Failed 0.03 sec > [ip-172-31-9-140:01503] [[25890,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 57: xcinv > 54/96 Test #55: xsinv ............................***Failed 0.03 sec > [ip-172-31-9-140:01505] [[25884,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 58: xzinv > 55/96 Test #54: xzptllt ..........................***Failed 0.04 sec > [ip-172-31-9-140:01504] [[25885,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 59: xsqr > 56/96 Test #56: xdinv ............................***Failed 0.03 sec > [ip-172-31-9-140:01506] [[25887,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 60: xdqr > 57/96 Test #57: xcinv ............................***Failed 0.03 sec > [ip-172-31-9-140:01507] [[25886,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 61: xcqr > 58/96 Test #60: xdqr .............................***Failed 0.02 sec > [ip-172-31-9-140:01510] [[25883,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 62: xzqr > 59/96 Test #58: xzinv ............................***Failed 0.03 sec > [ip-172-31-9-140:01508] [[25881,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 63: xsbrd > 60/96 Test #59: xsqr .............................***Failed 0.03 sec > [ip-172-31-9-140:01509] [[25880,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 64: xdbrd > 61/96 Test #63: xsbrd ............................***Failed 0.02 sec > [ip-172-31-9-140:01513] [[25876,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 65: xcbrd > 62/96 Test #61: xcqr .............................***Failed 0.03 sec > [ip-172-31-9-140:01511] [[25882,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 66: xzbrd > 63/96 Test #62: xzqr .............................***Failed 0.03 sec > [ip-172-31-9-140:01512] [[25877,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 67: xshrd > 64/96 Test #64: xdbrd ............................***Failed 0.04 sec > [ip-172-31-9-140:01514] [[25879,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 68: xdhrd > 65/96 Test #65: xcbrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01515] [[25878,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 69: xchrd > 66/96 Test #67: xshrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01517] [[25872,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 70: xzhrd > 67/96 Test #66: xzbrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01516] [[25873,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 71: xstrd > 68/96 Test #68: xdhrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01518] [[25875,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 72: xdtrd > 69/96 Test #71: xstrd ............................***Failed 0.02 sec > [ip-172-31-9-140:01521] [[25868,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 73: xctrd > 70/96 Test #70: xzhrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01520] [[25869,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 74: xztrd > 71/96 Test #69: xchrd ............................***Failed 0.04 sec > [ip-172-31-9-140:01519] [[25874,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 75: xssvd > 72/96 Test #73: xctrd ............................***Failed 0.02 sec > [ip-172-31-9-140:01523] [[25870,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 76: xdsvd > 73/96 Test #75: xssvd ............................***Failed 0.02 sec > [ip-172-31-9-140:01525] [[25864,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 77: xssep > 74/96 Test #74: xztrd ............................***Failed 0.03 sec > [ip-172-31-9-140:01524] [[25865,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 78: xdsep > 75/96 Test #72: xdtrd ............................***Failed 0.05 sec > [ip-172-31-9-140:01522] [[25871,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 79: xcsep > 76/96 Test #76: xdsvd ............................***Failed 0.03 sec > [ip-172-31-9-140:01526] [[25867,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 80: xzsep > 77/96 Test #78: xdsep ............................***Failed 0.02 sec > [ip-172-31-9-140:01528] [[25861,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 81: xsgsep > 78/96 Test #79: xcsep ............................***Failed 0.03 sec > [ip-172-31-9-140:01529] [[25860,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 82: xdgsep > 79/96 Test #77: xssep ............................***Failed 0.04 sec > [ip-172-31-9-140:01527] [[25866,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 83: xcgsep > 80/96 Test #80: xzsep ............................***Failed 0.02 sec > [ip-172-31-9-140:01530] [[25863,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 84: xzgsep > 81/96 Test #81: xsgsep ...........................***Failed 0.03 sec > [ip-172-31-9-140:01531] [[25862,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 85: xsnep > 82/96 Test #82: xdgsep ...........................***Failed 0.02 sec > [ip-172-31-9-140:01532] [[25857,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 86: xdnep > 83/96 Test #83: xcgsep ...........................***Failed 0.03 sec > [ip-172-31-9-140:01533] [[25856,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 87: xcnep > 84/96 Test #84: xzgsep ...........................***Failed 0.03 sec > [ip-172-31-9-140:01534] [[25859,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 88: xznep > 85/96 Test #85: xsnep ............................***Failed 0.02 sec > [ip-172-31-9-140:01535] [[25858,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 89: xcevc > 86/96 Test #87: xcnep ............................***Failed 0.03 sec > [ip-172-31-9-140:01537] [[26364,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 90: xzevc > 87/96 Test #86: xdnep ............................***Failed 0.04 sec > [ip-172-31-9-140:01536] [[26365,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 91: xssyevr > 88/96 Test #89: xcevc ............................***Failed 0.02 sec > [ip-172-31-9-140:01539] [[26366,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 92: xdsyevr > 89/96 Test #88: xznep ............................***Failed 0.03 sec > [ip-172-31-9-140:01538] [[26367,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 93: xcheevr > 90/96 Test #90: xzevc ............................***Failed 0.03 sec > [ip-172-31-9-140:01540] [[26361,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 94: xzheevr > 91/96 Test #92: xdsyevr ..........................***Failed 0.02 sec > [ip-172-31-9-140:01542] [[26363,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 95: xshseqr > 92/96 Test #91: xssyevr ..........................***Failed 0.03 sec > [ip-172-31-9-140:01541] [[26360,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > Start 96: xdhseqr > 93/96 Test #93: xcheevr ..........................***Failed 0.03 sec > [ip-172-31-9-140:01543] [[26362,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > 94/96 Test #95: xshseqr ..........................***Failed 0.02 sec > [ip-172-31-9-140:01545] [[26356,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > 95/96 Test #94: xzheevr ..........................***Failed 0.03 sec > [ip-172-31-9-140:01544] [[26357,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > 96/96 Test #96: xdhseqr ..........................***Failed 0.03 sec > [ip-172-31-9-140:01546] [[26359,0],0] ORTE_ERROR_LOG: Not found in file > ../../../../../../orte/mca/ess/hnp/ess_hnp_module.c at line 320 > -------------------------------------------------------------------------- > It looks like orte_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during orte_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_pmix_base_select failed > --> Returned value Not found (-13) instead of ORTE_SUCCESS > -------------------------------------------------------------------------- > > > 0% tests passed, 96 tests failed out of 96 > > Total Test time (real) = 0.71 sec > > The following tests FAILED: > 1 - xCbtest (Failed) > 2 - xFbtest (Failed) > 3 - spb1tst (Failed) > 4 - dpb1tst (Failed) > 5 - cpb1tst (Failed) > 6 - zpb1tst (Failed) > 7 - spb2tst (Failed) > 8 - dpb2tst (Failed) > 9 - cpb2tst (Failed) > 10 - zpb2tst (Failed) > 11 - spb3tst (Failed) > 12 - dpb3tst (Failed) > 13 - cpb3tst (Failed) > 14 - zpb3tst (Failed) > 15 - spb1tim (Failed) > 16 - dpb1tim (Failed) > 17 - cpb1tim (Failed) > 18 - zpb1tim (Failed) > 19 - spb2tim (Failed) > 20 - dpb2tim (Failed) > 21 - cpb2tim (Failed) > 22 - zpb2tim (Failed) > 23 - spb3tim (Failed) > 24 - dpb3tim (Failed) > 25 - cpb3tim (Failed) > 26 - zpb3tim (Failed) > 27 - xslu (Failed) > 28 - xdlu (Failed) > 29 - xclu (Failed) > 30 - xzlu (Failed) > 31 - xsdblu (Failed) > 32 - xddblu (Failed) > 33 - xcdblu (Failed) > 34 - xzdblu (Failed) > 35 - xsdtlu (Failed) > 36 - xddtlu (Failed) > 37 - xcdtlu (Failed) > 38 - xzdtlu (Failed) > 39 - xsgblu (Failed) > 40 - xdgblu (Failed) > 41 - xcgblu (Failed) > 42 - xzgblu (Failed) > 43 - xsllt (Failed) > 44 - xdllt (Failed) > 45 - xcllt (Failed) > 46 - xzllt (Failed) > 47 - xspbllt (Failed) > 48 - xdpbllt (Failed) > 49 - xcpbllt (Failed) > 50 - xzpbllt (Failed) > 51 - xsptllt (Failed) > 52 - xdptllt (Failed) > 53 - xcptllt (Failed) > 54 - xzptllt (Failed) > 55 - xsinv (Failed) > 56 - xdinv (Failed) > 57 - xcinv (Failed) > 58 - xzinv (Failed) > 59 - xsqr (Failed) > 60 - xdqr (Failed) > 61 - xcqr (Failed) > 62 - xzqr (Failed) > 63 - xsbrd (Failed) > 64 - xdbrd (Failed) > 65 - xcbrd (Failed) > 66 - xzbrd (Failed) > 67 - xshrd (Failed) > 68 - xdhrd (Failed) > 69 - xchrd (Failed) > 70 - xzhrd (Failed) > 71 - xstrd (Failed) > 72 - xdtrd (Failed) > 73 - xctrd (Failed) > 74 - xztrd (Failed) > 75 - xssvd (Failed) > 76 - xdsvd (Failed) > 77 - xssep (Failed) > 78 - xdsep (Failed) > 79 - xcsep (Failed) > 80 - xzsep (Failed) > 81 - xsgsep (Failed) > 82 - xdgsep (Failed) > 83 - xcgsep (Failed) > 84 - xzgsep (Failed) > 85 - xsnep (Failed) > 86 - xdnep (Failed) > 87 - xcnep (Failed) > 88 - xznep (Failed) > 89 - xcevc (Failed) > 90 - xzevc (Failed) > 91 - xssyevr (Failed) > 92 - xdsyevr (Failed) > 93 - xcheevr (Failed) > 94 - xzheevr (Failed) > 95 - xshseqr (Failed) > 96 - xdhseqr (Failed) > Errors while running CTest > make[2]: *** [Makefile:174: test] Error 8 > make[2]: Leaving directory '/<<PKGBUILDDIR>>/build-openmpi' > dh_auto_test: error: cd build-openmpi && make -j4 test ARGS\+=-j4 returned > exit code 2 The full build log is available from: http://qa-logs.debian.net/2020/12/26/scalapack_2.1.0-4_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! If you reassign this bug to another package, please marking it as 'affects'-ing this package. See https://www.debian.org/Bugs/server-control#affects If you fail to reproduce this, please provide a build log and diff it with me so that we can identify if something relevant changed in the meantime. About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures.