Your message dated Sun, 17 Oct 2021 04:18:30 +0000
with message-id <e1mbxd0-000bx3...@fasolo.debian.org>
and subject line Bug#990428: fixed in ifenslave 2.13
has caused the Debian Bug report #990428,
regarding ifenslave: Bonding not working on bullseye (using bond-slaves config)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
990428: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990428
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: ifenslave
Version: 2.12
Severity: important
Dear Maintainer,
Bonding on Debian 11 Bullseye is not working, when using "bond-slaves int1
int2" syntax on the bonding interface.
However it seems to work, when defining bonding the other way around using
"bond-master bond1" on the interfaces which make up the bonding interface.
I came across bug #968368 and modified the ifenslave pre-up.d script, hence the
changes below.
The same config (using bond-slaves) was working fine in Debian Buster. In
Bullseye the bond interface stays DOWN and /proc/net/bonding/bond* also shows
mii-status down.
-- System Information:
Debian Release: 11.0
APT prefers testing-security
APT policy: (500, 'testing-security'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-7-amd64 (SMP w/24 CPU threads)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages ifenslave depends on:
ii ifupdown 0.8.36
ii iproute2 5.10.0-4
Versions of packages ifenslave recommends:
ii net-tools 1.60+git20181103.0eebece-1
ifenslave suggests no packages.
-- Configuration Files:
/etc/network/if-pre-up.d/ifenslave changed:
[ "$VERBOSITY" = 1 ] && set -x
[ "$ADDRFAM" = meta ] && exit 0
add_master()
{
# Return if $IFACE is already a bonding interface.
[ -f "/sys/class/net/$IFACE/bonding/slaves" ] && return
ip link add dev "$IFACE" type bond
}
sysfs_change_down()
{
# Called with :
# $1 = basename of the file in bonding/ to write to.
# $2 = value to write. Won't write if $2 is empty.
if [ -n "$2" ] ; then
# If the value we plan to write is different from the current
one...
if ! grep -sq "\\<$2\\>"
"/sys/class/net/$BOND_MASTER/bonding/$1" ; then
# ...and the master is up...
if ip link show "$BOND_MASTER" | grep -sq '[<,]UP[,>]'
; then
# ...bring the master down.
ip link set dev "$BOND_MASTER" down
fi
fi
sysfs "$1" "$2"
fi
}
sysfs()
{
# Called with :
# $1 = basename of the file in bonding/ to write to.
# $2 = value to write. Won't write if $2 is empty.
if [ -n "$2" ] ; then
echo "$2" > "/sys/class/net/$BOND_MASTER/bonding/$1"
return $?
fi
return 0
}
sysfs_add()
{
#??Called with :
# $1 = target filename.
# $2 = values to write.
for value in $2; do
# Do not add $2 to $1 if already present.
if ! grep -sq "\\<$value\\>"
"/sys/class/net/$BOND_MASTER/bonding/$1"
then
sysfs "$1" "+$value"
fi
done
}
early_setup_master()
{
# Warning: the order in which we write into the sysfs files is
important.
# Double check in drivers/net/bonding/bond_sysfs.c in the Linux kernel
source tree
# before changing anything here.
# fail_over_mac must be set before enslavement of any slaves.
sysfs fail_over_mac "$IF_BOND_FAIL_OVER_MAC"
}
enslave_slaves()
{
case "$BOND_SLAVES" in
none)
BOND_SLAVES=""
;;
all)
BOND_SLAVES=$(sed -ne 's/ *\(eth[^:]*\):.*/\1/p'
/proc/net/dev)
;;
esac
[ "$VERBOSITY" = 1 ] && v=-v
for slave in $BOND_SLAVES ; do
export IFENSLAVE_ENV_NAME="IFUPDOWN_$slave"
IFUPDOWN_IFACE="$(printenv "$IFENSLAVE_ENV_NAME")"
unset IFENSLAVE_ENV_NAME
#if ifquery --state "$slave" 2>/dev/null || [ -n
"$IFUPDOWN_IFACE" ] ; then
if ifquery --state "$slave" 2>/dev/null ; then
# Skipping interface that's already up or being
configured
continue
else
# Ensure $slave is down.
ip link set "$slave" down 2>/dev/null
if ! sysfs_add slaves "$slave" 2>/dev/null ; then
echo "Failed to enslave $slave to $BOND_MASTER.
Is $BOND_MASTER ready and a bonding interface ?" >&2
else
# Bring up slave if it is the target of an
allow-bondX stanza.
# This is useful to bring up slaves that need
extra setup.
ifup $v --allow "$BOND_MASTER" "$slave"
fi
fi
done
}
setup_master()
{
# Warning: the order in which we write into the sysfs files is
important.
# Double check in drivers/net/bonding/bond_sysfs.c in the Linux kernel
source tree
# before changing anything here.
# use_carrier can be set anytime.
sysfs use_carrier "$IF_BOND_USE_CARRIER"
# num_grat_arp can be set anytime.
sysfs num_grat_arp "$IF_BOND_NUM_GRAT_ARP"
# num_unsol_na can be set anytime.
sysfs num_unsol_na "$IF_BOND_NUM_UNSOL_NA"
# arp_ip_target must be set before arp_interval.
sysfs_add arp_ip_target "$IF_BOND_ARP_IP_TARGET"
sysfs arp_interval "$IF_BOND_ARP_INTERVAL"
# miimon must be set before updelay and downdelay.
sysfs miimon "$IF_BOND_MIIMON"
sysfs downdelay "$IF_BOND_DOWNDELAY"
sysfs updelay "$IF_BOND_UPDELAY"
# Changing ad_select requires $BOND_MASTER to be down.
sysfs_change_down ad_select "$IF_BOND_AD_SELECT"
# Changing mode requires $BOND_MASTER to be down.
# Mode should be set after miimon or arp_interval, to avoid a warning
in syslog.
sysfs_change_down mode "$IF_BOND_MODE"
# Requires $BOND_MASTER to be down and mode to be configured
sysfs_change_down xmit_hash_policy "$IF_BOND_XMIT_HASH_POLICY"
sysfs_change_down tlb_dynamic_lb "$IF_BOND_TLB_DYNAMIC_LB"
# packets_per_slave allowed for mode balance-rr only.
sysfs packets_per_slave "$IF_BOND_PACKETS_PER_SLAVE"
# arp_validate must be after mode (because mode must be active-backup).
sysfs arp_validate "$IF_BOND_ARP_VALIDATE"
# lacp_rate must be set after mode (because mode must be 802.3ad).
# Changing lacp_rate requires $BOND_MASTER to be down.
sysfs_change_down lacp_rate "$IF_BOND_LACP_RATE"
# queue_id must be set after enslavement.
for iface_queue_id in $IF_BOND_QUEUE_ID ; do
sysfs iface_queue_id "$iface_queue_id"
done
# active_slave must be set after mode and after enslavement.
# The slave must be up and the underlying link must be up too.
# FIXME: We should have a way to write an empty string to active_slave,
to set the active_slave to none.
if [ -n "$IF_BOND_ACTIVE_SLAVE" ] ; then
if [ "$IF_BOND_ACTIVE_SLAVE" = "none" ] ; then
sysfs active_slave ""
else
# Need to force interface up before. Bonding will
refuse to activate a down interface.
if ifquery -l "$IF_BOND_ACTIVE_SLAVE" 2>/dev/null ; then
ifup "$IF_BOND_ACTIVE_SLAVE"
else
ip link set "$IF_BOND_ACTIVE_SLAVE" up
fi
sysfs active_slave "$IF_BOND_ACTIVE_SLAVE"
fi
fi
}
setup_primary() {
# primary must be set after mode (because only supported in some modes)
and after enslavement.
# The first slave in bond-primary found in current slaves becomes the
primary.
# If no slave in bond-primary is found, then the primary does not
change.
for slave in $IF_BOND_PRIMARY ; do
slaves="/sys/class/net/$BOND_MASTER/bonding/slaves"
if grep -sq "\\<$slave\\>" "$slaves" ; then
sysfs primary "$slave"
break
fi
done
# primary_reselect should be set after mode (it is only supported in
some modes), after enslavement
# and after primary. This is currently (2.6.35-rc1) not enforced by the
bonding driver, but it is
# probably safer to do it in that order.
sysfs primary_reselect "$IF_BOND_PRIMARY_RESELECT"
}
setup_master_device() {
add_master
early_setup_master
setup_master
enslave_slaves
setup_primary
}
setup_slave_device() {
# Require the bond master to have an iface stanza
#if ! ifstate -l "$IF_BOND_MASTER" 2>/dev/null ; then
if ! ifquery -l "$IF_BOND_MASTER" 2>&1 >/dev/null ; then
echo "No iface stanza found for master $IF_BOND_MASTER" >&2
exit 1
fi
# Ensure the master is up or being configured
export IFENSLAVE_ENV_NAME="IFUPDOWN_$IF_BOND_MASTER"
IFUPDOWN_IF_BOND_MASTER="$(printenv "$IFENSLAVE_ENV_NAME")"
unset IFENSLAVE_ENV_NAME
if [ -z "$IFUPDOWN_IF_BOND_MASTER" ] ; then
#ifquery --state "$IF_BOND_MASTER" 2>/dev/null || ifup
"$IF_BOND_MASTER"
ifquery --state "$IF_BOND_MASTER" 2>&1 >/dev/null || ifup
"$IF_BOND_MASTER"
fi
# Enslave it to the master
#ip link set "$slave" down 2>/dev/null
#if ! sysfs_add slaves "$slave" 2>/dev/null ; then
# echo "Failed to enslave $slave to $BOND_MASTER." >&2
ip link set "$1" down 2>/dev/null
if ! sysfs_add slaves "$1" 2>/dev/null ; then
echo "Failed to enslave $1 to $BOND_MASTER." >&2
fi
setup_primary
}
IF_BOND_SLAVES=${IF_BOND_SLAVES:-$IF_SLAVES}
if [ -n "$IF_BOND_MASTER" ] ; then
# FIXME: use function arguments instead of this variable
BOND_MASTER="$IF_BOND_MASTER"
setup_slave_device "$IFACE"
elif [ -n "$IF_BOND_SLAVES" ] || [ -n "$IF_BOND_MODE" ] ; then
# FIXME: use function arguments instead of these variables
BOND_MASTER="$IFACE"
BOND_SLAVES="$IF_BOND_SLAVES"
setup_master_device "$IFACE"
fi
exit 0
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: ifenslave
Source-Version: 2.13
Done: Guillem Jover <guil...@debian.org>
We believe that the bug you reported is fixed in the latest version of
ifenslave, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 990...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Guillem Jover <guil...@debian.org> (supplier of updated ifenslave package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 17 Oct 2021 06:02:55 +0200
Source: ifenslave
Architecture: source
Version: 2.13
Distribution: unstable
Urgency: medium
Maintainer: Debian QA Group <packa...@qa.debian.org>
Changed-By: Guillem Jover <guil...@debian.org>
Closes: 949062 968368 990428 991930 992102
Changes:
ifenslave (2.13) unstable; urgency=medium
.
* QA upload.
.
[ Guillem Jover ]
* Fix MAC address setting messed up by udev for bond interfaces.
(Closes: #949062)
* Use ifquery instead of example contrib script ifstate. (Closes: #991930)
* Fix ifquery redirections.
* Bump Standards-Version to 4.6.0 (no changed needed).
* Remove long supported Linux version requirements from Description.
.
[ Sami Haahtinen ]
* Use correct argument in setup_slave_device(). (Closes: #968368)
.
[ Oleander Reis ]
* Handle slave definitions of interfaces with no bond settings.
(Closes: #990428)
* Delete bond interfaces on ifdown -a. (Closes: #992102)
Checksums-Sha1:
25a002fbc7432ccb690a4ecb28b461ca6428ad63 1517 ifenslave_2.13.dsc
262d1ff46632e17af69eb518a0caf4085ca42422 12684 ifenslave_2.13.tar.xz
9dc3228e5f4dfe2effa1243835f07f7434c0c8bc 5547 ifenslave_2.13_amd64.buildinfo
Checksums-Sha256:
46e254ed6ef81ef043bb6cb928c165c5390d8de5f06497d4b84bdb318efef995 1517
ifenslave_2.13.dsc
bcbb4d2b723c31d659cff02be4d3f4d57e2b9d63dbea697532fba6b029c19ed0 12684
ifenslave_2.13.tar.xz
e401a181ebfb31370e0630d0a96e013129913c0235f404f957c61a9be9642dbc 5547
ifenslave_2.13_amd64.buildinfo
Files:
f590933712e2acf282b81116fbddf0fa 1517 net optional ifenslave_2.13.dsc
2572335f3b680178cba0bedf3c844f1a 12684 net optional ifenslave_2.13.tar.xz
283b76562b276f788c9ee8c4fc2ea95e 5547 net optional
ifenslave_2.13_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----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=ywOu
-----END PGP SIGNATURE-----
--- End Message ---