Your message dated Fri, 27 Feb 2026 01:49:04 +0000
with message-id <[email protected]>
and subject line Bug#1129129: fixed in libapp-cache-perl 0.37-4
has caused the Debian Bug report #1129129,
regarding libapp-cache-perl: FTBFS: dh_installchangelogs: error: Could not
parse timestamp 'Wed, 24 Sept 2008 19:32:23 +0200' on line 86 of
debian/changelog. Please ensure it follows the policy requirements for a
signoff date
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1129129: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1129129
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:libapp-cache-perl
Version: 0.37-3
Severity: serious
Tags: ftbfs forky sid
Dear maintainer:
During a rebuild of all packages in unstable, this package failed to build.
Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:
https://people.debian.org/~sanvila/build-logs/202602/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:libapp-cache-perl, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
debian/rules clean
dh clean
debian/rules override_dh_clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
rm -rf /<<PKGBUILDDIR>>/debian/build
dh_clean
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2
-Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -fstack-clash-protection -Wformat
-Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2"
LD="x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration
-ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong
-fstack-clash-protection -Wformat -Werror=format-security -fcf-protection
-Wl,-z,relro"
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for App::Cache
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j2
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/App/Cache.pm blib/lib/App/Cache.pm
Manifying 1 pod document
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
debian/rules override_dh_auto_test
make[1]: Entering directory '/<<PKGBUILDDIR>>'
mkdir -p /<<PKGBUILDDIR>>/debian/build
HOME=/<<PKGBUILDDIR>>/debian/build NO_NETWORK_TESTING=1 dh_auto_test
make -j2 test TEST_VERBOSE=1
make[2]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness"
"-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')"
t/*.t
t/pod.t ...........
1..1
ok 1 - POD test for blib/lib/App/Cache.pm
ok
t/pod_coverage.t ..
1..1
ok 1 - Pod coverage on App::Cache
ok
t/simple.t ........
1..48
ok 1 - use App::Cache;
ok 2 - use App::Cache::Test;
ok 3
ok 4
ok 5
ok 6 - An object of class 'App::Cache' isa 'App::Cache'
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14 - An object of class 'App::Cache' isa 'App::Cache'
ok 15
ok 16 - tmp_dir exists ok
ok 17 - tmp_dir removed successfully
ok 18 - An object of class 'App::Cache' isa 'App::Cache'
ok 19
ok 20 - tmp_dir exists ok
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok 32
ok 33
ok 34
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41
ok 42
ok 43
ok 44 # skip Network tests skipped because of NO_NETWORK_TESTING
ok 45 # skip Network tests skipped because of NO_NETWORK_TESTING
ok 46 # skip Network tests skipped because of NO_NETWORK_TESTING
ok 47 - disabled does not cache
ok 48 - removed cache dir
ok
All tests successful.
Files=3, Tests=50, 6 wallclock secs ( 0.01 usr 0.00 sys + 0.21 cusr 0.05
csys = 0.27 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libapp-cache-perl/
make -j2 install DESTDIR=/<<PKGBUILDDIR>>/debian/libapp-cache-perl
AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 1 pod document
Installing
/<<PKGBUILDDIR>>/debian/libapp-cache-perl/usr/share/perl5/App/Cache.pm
Installing
/<<PKGBUILDDIR>>/debian/libapp-cache-perl/usr/share/man/man3/App::Cache.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs
dh_installchangelogs
dh_installchangelogs: error: Could not parse timestamp 'Wed, 24 Sept 2008
19:32:23 +0200' on line 86 of debian/changelog. Please ensure it follows the
policy requirements for a signoff date
dh_installchangelogs: error: Aborting due to earlier error
make: *** [debian/rules:6: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess failed with exit
status 2
--------------------------------------------------------------------------------
--- End Message ---
--- Begin Message ---
Source: libapp-cache-perl
Source-Version: 0.37-4
Done: gregor herrmann <[email protected]>
We believe that the bug you reported is fixed in the latest version of
libapp-cache-perl, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
gregor herrmann <[email protected]> (supplier of updated libapp-cache-perl
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Fri, 27 Feb 2026 02:28:16 +0100
Source: libapp-cache-perl
Architecture: source
Version: 0.37-4
Distribution: unstable
Urgency: medium
Maintainer: Debian Perl Group <[email protected]>
Changed-By: gregor herrmann <[email protected]>
Closes: 1129129
Changes:
libapp-cache-perl (0.37-4) unstable; urgency=medium
.
* Team upload.
* Remove libmodule-build-perl from Build-Depends.
This distribution uses ExtUtils::MakeMaker.
* Fix month in 0.35-1 changelog entry.
Thanks to Santiago Vila for the bug report. (Closes: #1129129)
* debian/rules: drop HOME handling. debhelper does this for us now.
* Declare compliance with Debian Policy 4.7.3.
* Remove «Rules-Requires-Root: no», which is the current default.
* Remove «Priority: optional», which is the current default.
Checksums-Sha1:
158ca06c65f257d0cec9a71d1d5aa957f76cf9a7 2594 libapp-cache-perl_0.37-4.dsc
1f509a569973549fdb68e2df18c124fad183b3c5 3364
libapp-cache-perl_0.37-4.debian.tar.xz
17a68f01ada2f2b83b72ddb26cbfe611c1e55af2 41628
libapp-cache-perl_0.37-4.git.tar.xz
18966bec2197244aaec28d970f301bc7cf467939 17330
libapp-cache-perl_0.37-4_source.buildinfo
Checksums-Sha256:
6250346c8189d623ab335eab75e7f63eae68156709a0b98788ec8873ed2bc499 2594
libapp-cache-perl_0.37-4.dsc
132de9ed4ae9004df6bbdbc8c7334c25fb4546dcde3e15db7712e477ea1ced79 3364
libapp-cache-perl_0.37-4.debian.tar.xz
dce6e606b43c554b0932e64ce46ded751043c29a79455c3e6e950a9878b4c87e 41628
libapp-cache-perl_0.37-4.git.tar.xz
afb5de6bf96a570403c8afd8cde353551005b9245cad577dd07f8f37275c969e 17330
libapp-cache-perl_0.37-4_source.buildinfo
Files:
8054035257ea1516ba0723fa20b7d108 2594 perl optional
libapp-cache-perl_0.37-4.dsc
3ba29da7ef4c51b7c5f1a2681323bba8 3364 perl optional
libapp-cache-perl_0.37-4.debian.tar.xz
1058599c6127cdb881ff4f67a12739dc 41628 perl None
libapp-cache-perl_0.37-4.git.tar.xz
9962d31f06f75d2b9a1a78264242720d 17330 perl optional
libapp-cache-perl_0.37-4_source.buildinfo
Git-Tag-Info: tag=307d11148b39413403c5cda832d5480a575ae329
fp=d1e1316e93a760a8104d85fabb3a68018649aa06
Git-Tag-Tagger: gregor herrmann <[email protected]>
-----BEGIN PGP SIGNATURE-----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=cP2T
-----END PGP SIGNATURE-----
pgpNBSVaoLRjs.pgp
Description: PGP signature
--- End Message ---
