Debian Installer sarge-i386-bussinescard.iso, httP://freedesktop.or/
~daniel/d-i from 22.11.2003
MB Asus P4B266-E,
Installed on /dev/hdb3 without any problems.
$ dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.1-RELEASE-p11 #0: Thu Nov 27 15:07:08 CET 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/NEW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06f9000.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc06f9244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06f92f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06f939c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1715283708 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1715.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536854528 (511 MB)
avail memory = 513904640 (490 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4B266-E> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f1e00
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xefffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 9 at device 3.0 on pci2
ohci0: <NEC uPD 9210 USB controller> mem 0xdc000000-0xdc000fff irq 9 at
device 4.0 on pci2
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdb800000-0xdb800fff irq 9 at
device 4.1 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 4.2 (no driver attached)
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xd400-0xd43f
mem 0xda800000-0xda800fff irq 5 at device 8.0 on pci2
fxp0: Ethernet address 00:e0:18:73:ce:24
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise PDC20269 UDMA133 controller> port
0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xd000-0xd007
mem 0xda000000-0xda003fff irq 9 at device 9.0 on pci2
ata2: at 0xd000 on atapci0
ata3: at 0xb400 on atapci0
sym0: <810a> port 0xa400-0xa4ff mem 0xd9800000-0xd98000ff irq 9 at
device 13.0 on pci2
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH2 UDMA100 controller> port 0x9800-0x980f at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0x9400-0x941f irq 10 at device 31.2 on pci0
usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0x9000-0x901f irq 9 at device 31.4 on pci0
usb3: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xc87ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
ad0: 16446MB <ST317221A> [33416/16/63] at ata0-master UDMA66
ad1: 76319MB <ST380011A> [155061/16/63] at ata0-slave UDMA100
ad4: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata2-master UDMA133
ad6: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata3-master UDMA133
acd0: DVD-ROM <JLMS XJ-HD166S> at ata1-master UDMA33
acd1: CD-RW <ASUS CRW-4012A> at ata1-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
pass0 at sym0 bus 0 target 5 lun 0
pass0: <UMAX Astra 2200 V2.2> Fixed Scanner SCSI-2 device
pass0: 3.300MB/s transfers
Mounting root from ufs:/dev/ad6s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <JLMS XJ-HD166S DS18> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <ASUS CRW-4012A 1.0> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
$ $ dmesg
$: not found
$ Copyright (c) 1992-2003 The FreeBSD Project.
Syntax error: word unexpected (expecting ")")
$ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
Syntax error: word unexpected (expecting ")")
$ The Regents of the University of California. All rights
reserved.
The: not found
$ FreeBSD 5.1-RELEASE-p11 #0: Thu Nov 27 15:07:08 CET 2003
FreeBSD: not found
$ [EMAIL PROTECTED]:/usr/src/sys/i386/compile/NEW
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/NEW: not found
$ Preloaded elf kernel "/boot/kernel/kernel" at 0xc06f9000.
Preloaded: not found
$ Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc06f9244.
Preloaded: not found
$ Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06f92f0.
Preloaded: not found
$ Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06f939c.
Preloaded: not found
$ Timecounter "i8254" frequency 1193182 Hz
Timecounter: not found
$ Timecounter "TSC" frequency 1715283708 Hz
Timecounter: not found
$ CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1715.28-MHz 686-class CPU)
Syntax error: "(" unexpected
$ Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Origin: not found
$
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Syntax error: newline unexpected
$ real memory = 536854528 (511 MB)
Syntax error: "(" unexpected
$ avail memory = 513904640 (490 MB)
Syntax error: "(" unexpected
$ Pentium Pro MTRR support enabled
Pentium: not found
$ npx0: <math processor> on motherboard
npx0:: not found
$ npx0: INT 16 interface
npx0:: not found
$ acpi0: <ASUS P4B266-E> on motherboard
acpi0:: not found
$ pcibios: BIOS version 2.10
pcibios:: not found
$ Using $PIR table, 12 entries at 0xc00f1e00
Using: not found
$ acpi0: power button is handled as a fixed feature programming model.
acpi0:: not found
$ Timecounter "ACPI-fast" frequency 3579545 Hz
Timecounter: not found
$ acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_timer0:: not found
$ acpi_cpu0: <CPU> on acpi0
acpi_cpu0:: not found
$ acpi_button0: <Power Button> on acpi0
acpi_button0:: not found
$ pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0:: not found
$ pci0: <ACPI PCI bus> on pcib0
pci0:: not found
$ agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xefffffff at
device 0.0 on pci0
agp0:: not found
$ pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:: not found
$ pci1: <ACPI PCI bus> on pcib1
pci1:: not found
$ pci1: <display, VGA> at device 0.0 (no driver attached)
Syntax error: "(" unexpected
$ pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:: not found
$ pci2: <ACPI PCI bus> on pcib2
pci2:: not found
$ pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 9 at device 3.0 on pci2
pcm0:: not found
$ ohci0: <NEC uPD 9210 USB controller> mem 0xdc000000-0xdc000fff irq 9
at device 4.0 on pci2
ohci0:: not found
$ usb0: OHCI version 1.0
usb0:: not found
$ usb0: <NEC uPD 9210 USB controller> on ohci0
usb0:: not found
$ usb0: USB revision 1.0
usb0:: not found
$ uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0:: not found
$ uhub0: 3 ports with 3 removable, self powered
uhub0:: not found
$ ohci1: <NEC uPD 9210 USB controller> mem 0xdb800000-0xdb800fff irq 9
at device 4.1 on pci2
ohci1:: not found
$ usb1: OHCI version 1.0
usb1:: not found
$ usb1: <NEC uPD 9210 USB controller> on ohci1
usb1:: not found
$ usb1: USB revision 1.0
usb1:: not found
$ uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1:: not found
$ uhub1: 2 ports with 2 removable, self powered
uhub1:: not found
$ pci2: <serial bus, USB> at device 4.2 (no driver attached)
Syntax error: "(" unexpected
$ fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xd400-0xd43f
mem 0xda800000-0xda800fff irq 5 at device 8.0 on pci2
Syntax error: "(" unexpected
$ fxp0: Ethernet address 00:e0:18:73:ce:24
fxp0:: not found
$ miibus0: <MII bus> on fxp0
miibus0:: not found
$ inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:: not found
$ inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
inphy0:: not found
$ atapci0: <Promise PDC20269 UDMA133 controller> port
0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xd000-0xd007
mem 0xda000000-0xda003fff irq 9 at device 9.0 on pci2
atapci0:: not found
$ ata2: at 0xd000 on atapci0
ata2:: not found
$ ata3: at 0xb400 on atapci0
ata3:: not found
$ sym0: <810a> port 0xa400-0xa4ff mem 0xd9800000-0xd98000ff irq 9 at
device 13.0 on pci2
sym0:: not found
$ sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0:: not found
$ isab0: <PCI-ISA bridge> at device 31.0 on pci0
isab0:: not found
$ isa0: <ISA bus> on isab0
isa0:: not found
$ atapci1: <Intel ICH2 UDMA100 controller> port 0x9800-0x980f at device
31.1 on pci0
atapci1:: not found
$ ata0: at 0x1f0 irq 14 on atapci1
ata0:: not found
$ ata1: at 0x170 irq 15 on atapci1
ata1:: not found
$ uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0x9400-0x941f irq 10 at device 31.2 on pci0
Syntax error: "(" unexpected
$ usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
Syntax error: "(" unexpected
$ usb2: USB revision 1.0
usb2:: not found
$ uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2:: not found
$ uhub2: 2 ports with 2 removable, self powered
uhub2:: not found
$ uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0x9000-0x901f irq 9 at device 31.4 on pci0
Syntax error: "(" unexpected
$ usb3: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
Syntax error: "(" unexpected
$ usb3: USB revision 1.0
usb3:: not found
$ uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3:: not found
$ uhub3: 2 ports with 2 removable, self powered
uhub3:: not found
$ fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Syntax error: "(" unexpected
$ fdc0: FIFO enabled, 8 bytes threshold
fdc0:: not found
$ fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xc87ff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> Timecounters tick every 10.000 msec
> ad0: 16446MB <ST317221A> [33416/16/63] at ata0-master UDMA66
> ad1: 76319MB <ST380011A> [155061/16/63] at ata0-slave UDMA100
> ad4: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata2-master UDMA133
> ad6: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata3-master UDMA133
> acd0: DVD-ROM <JLMS XJ-HD166S> at ata1-master UDMA33
> acd1: CD-RW <ASUS CRW-4012A> at ata1-slave UDMA33
> Waiting 15 seconds for SCSI devices to settle
> pass0 at sym0 bus 0 target 5 lun 0
> pass0: <UMAX Astra 2200 V2.2> Fixed Scanner SCSI-2 device
> pass0: 3.300MB/s transfers
> Mounting root from ufs:/dev/ad6s2a
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <JLMS XJ-HD166S DS18> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not
present
> cd1 at ata1 bus 0 target 1 lun 0
> cd1: <ASUS CRW-4012A 1.0> Removable CD-ROM SCSI-0 device
> cd1: 33.000MB/s transfers
> cd1: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
> $
--
Werner Wobrowsky
Esslinggasse 15/6a
A - 1010 Wien
[EMAIL PROTECTED] +43 1 9131941
