On Wed, 13 Aug 2008 22:09:43 +0300
Damyan Ivanov <[EMAIL PROTECTED]> wrote:
> However, nocrt didn't work at the kernel command line. Searching
> revealed that this is a thermal module parameter. Either pass
> "thermal.nocrt=1" to the kernel (not tested) or add "options thermal
> nocrt=1" to /etc/modprobe.d/local.
>
> Note that initrd's have to be updated after changing modprobe.d
For me adding "options thermal nocrt=1" to /etc/modprobe.d/local
works and the system does not shut down any more.
Obviously acpi still thinks that my eeepc is burning ;)
cheyenne:~# acpi -V
Battery 0: Discharging, 100%, 01:40:00 remaining
AC Adapter 0: off-line
Thermal 0: critical, 144.0 degrees C
Cooling 0: Processor 0 of 7
--
++ Powered by Sid ++
_______________________________________________
Debian-eeepc-devel mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel
