Hi every body, Any one can suggest me how can I make avaible the I/O ports of a multiport serial card.
when I try to make for example #setserial /dev/ttyS5 irq 9 uart 16550 LSR safety check engaged and when I made #statserial /dev/ttyS5 TIOCMGET failed: Input/output error When I read se Serial HOWTO and it points to enable the I/O addresses. the idea is when I made a lspci -vv the Control register show I/O - And when I make setpci -d 13a8:0158 command=101 the I/O don't become enable it remains with I/O - and the register actually take the value 100 that is setpci -d 13a8:0158 command 0002 I look for other devices like the sound card and the video card ... (they have the I/O enable (I/O+) and look for its controls register setpci -d vendor_id:device_id command and the answer was 0007 Then I try to put the same value setpci -d 13a8:0158 command=0007 but when I turn to look setpci -d 13a8:0158 command the answer was 0002 regards Fidel ___________________________________________________ Yahoo! Messenger - Nueva versi�n GRATIS Super Webcam, voz, caritas animadas, y m�s... http://messenger.yahoo.es
