ifconfig eth0:1 192.168.1.254 netmask 255.255.255.0 route add -host 192.168.1.254 dev eth0:1
-- Kevin - mailto:[EMAIL PROTECTED] -- > Hi! > I just joined this list a few hours ago so, please don't scream if this > question was asked yesterday. So far, I have a nice little box set up with > total connectivity to the outside world via my cable modem on Mac LC475 > w/68040 running kernel 2.2.10 but I want to share this connection with my > other computer. So, I ran ipchains -A forward -b -s 0.0.... and whatever > and it returned without error. So, then I went on to try and add the > 'virtual' port for connectivity to the LAN on the same ethernet card > because my cable modem and all computers are all plugged into one hub. > But, for whatever reason, I can not, no matter how hard I try, how much I > read or how many people I ask can I setup the ifconfig for the second > 'virtual' interface. Could someone please give me an example line to add > 192.168.1.254 as device eth0.0. And my other question, how do yo do port > forwarding in ipchains, could I have an example for mapping ports 5545-5505 > to address 192.168.1.1. > Thanks in advance > Marc > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
