Mahdi Rahimi wrote:
Dear Bart-jan Thanks for attention.
I have correct my network configurations:
1) remove all interfaces on Debian except 1 interface
2) connect it to switch 2950 configured as Trunk
3)
#modprobe 8021q
#vconfig add eth0 2
#vconfig add eth0 4
4) vi /etc/network/interfaces
auto eth0
auto eth0.2
iface eth0.2 inet static
address x.x.x.x
...
auto eth0.4
iface eth0.4 inet static
address x.x.x.x
....
5) vi /etc/default/dhcp3-server
interface "eth0.4"
problems:
1)but my DHCP server don't Work!!! 0n eth0.4 interface.
Mmm, weird. What does syslog say?
2) Is the Vlan ID on 2950 same as on the vconfig?
You don't need (or should?) do the vconfigs yourself. They are done by
the interfaces file automagically.
If ifup doesn't recognize the vlan, then please add the correct
vlan_raw_device statement.
3) My server require any patch?
Dunno. You could run into problems if your network card can't handle
larger than normal frames (a tagged vlan increases the frame size by 4
bytes). This is usually a hardware limitation...
--
Tot ziens,
Bart-Jan
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]