On Thu, Aug 12, 2004 at 08:14:37AM +0200, Sven Luther wrote: > On Thu, Aug 12, 2004 at 01:30:06AM +0200, Michel D�nzer wrote: > > On Wed, 2004-08-11 at 23:40 +0200, Sven Luther wrote: > > > > > > [...] gnome-volume-manager seems to be broken on powerpc, i had a > > > quick look again earlier today, but nothing happened, and i couldn't go > > > into > > > more details. > > > > Works fine here... > > When at linuxtag and on my ibook, trying it out resulted in a kernel OOPS and > no USB stick or cdrom showing up. What kernel are you using ? > > But indeed it is working now, at least for CD roms, don't know for usb sticks, > but as the uhci driver seems to have some troubles on usb, ...
Indeed, it doesn't work for USB sticks, since we don't have a /etc/fstab entry for usb sticks, which appear as random /dev/sd## entries, depending on the usb stick model used and if you have other scsi or sata devices in your system. Here is what i get : Aug 12 08:52:05 localhost kernel: usb 2-2: new full speed USB device using address 2 Aug 12 08:52:06 localhost kernel: SCSI subsystem initialized Aug 12 08:52:06 localhost kernel: Initializing USB Mass Storage driver... Aug 12 08:52:06 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Aug 12 08:52:06 localhost kernel: Vendor: Trek Model: ThumbDrive G3 Rev: 1.12 Aug 12 08:52:06 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Aug 12 08:52:06 localhost kernel: USB Mass Storage device found at 2 Aug 12 08:52:06 localhost kernel: usbcore: registered new driver usb-storage Aug 12 08:52:06 localhost kernel: USB Mass Storage support registered. Aug 12 08:52:06 localhost usb.agent[12806]: usb-storage: loaded successfully Aug 12 08:52:06 localhost scsi.agent[12865]: disk at /devices/pci0000:00/0000:00:0c.3/usb2/2-2/2-2:1.0/host0/0:0:0:0 Aug 12 08:52:06 localhost kernel: SCSI device sda: 129024 512-byte hdwr sectors (66 MB) Aug 12 08:52:06 localhost kernel: sda: assuming Write Enabled Aug 12 08:52:06 localhost kernel: sda: assuming drive cache: write through Aug 12 08:52:06 localhost kernel: /dev/scsi/host0/bus0/target0/lun0: p1 Aug 12 08:52:06 localhost kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Aug 12 08:52:06 localhost udev[12905]: creating device node '/dev/sda' Aug 12 08:52:06 localhost udev[12906]: creating device node '/dev/sda1' so i guess modifying the scsi.agent or usb.agent to add/remove the /etc/fstab entry should be a nice solution for this. Friendly, Sven Luther
