Hi Dan,
 
    Thanks for your speedy reply. I really appreciate your answers. Where did you find a cheap visualize EG/PCI? The only one I could find was at kam.com and they want $120 for it!
 
Best regards,
 
Harry
-----Original Message-----
From: Daniele Antonozzi [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 16, 2004 10:48 AM
To: [email protected]
Subject: Re: Graphics mode on my C3000

You can follow this link to get some hints for the graphics card

http://parisc-linux.org/faq/graphics-howto.html

What graphic card do you have?
 X doesn't work on FX graphics cards. I have the visualize EG/PCI and X works fine. I cheaply bought it on internet
 
The kernel of woody (2.4.17) does not support usb mouse and keyboard,  you need to install a recent kernel. .. For example I have installed the kernel-image 2.4..24 . Take a look to the parisc boot howto I use it to install debian on my c3k. It is really helpfull!!!
 
 
the ide cd rom is not supported from debian. You have to use an external scsi cd drive to use your cd set.
 


Dan

----- Original Message -----
From: "Harry Cochran" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, June 16, 2004 2:58 PM
Subject: Graphics mode on my C3000


> Hi,
>
> I have installed Debian hppa on my C3000. I had to use a serial console to
> do it. I installed X with tasksel. When I change back to graphics mode (pa
> con GRAPHICS(2)), the system boots, and at the end when it tries to go
into
> X ("Starting X display manager: xdm."), the screen flashes 3 times and the
> system dies. I've seen comments from several people that they got their
> C3000 going. I'm hoping someone can tell me how to get my console into
> graphics mode. Also, if I special instructions in palo.conf to get the usb
> keyboard and the usb mouse going, I would appreciat e a pointer on what I
> should put in. Interestingly, when you go into ipl on boot, it says
> "console=tty0" (I was expecting "console=GRAPHICS(2)" ... tried change to
> this, but it didn't help).
>
> Thanks,
>
> Harry
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
>


Yahoo! Companion - Scarica gratis la toolbar di Ricerca di Yahoo!

Reply via email to