On Mon, Mar 16, 2009 at 11:25:51AM -0700, Marc Rodriguez wrote: > Package: linux-image > Version: 2.6.26-parisc64 > Severity: Critical > > > Attempting to boot a 2.6.26 kernel on an HP N4000 machine (64 bit PA-RISC) > yields the following results (beginning at system startup): > <<Beginning of error>> > > > > GSP Host Name: uninitialized > > GSP> co > > > CO > > You are now leaving the Guardian Service Processor Command Interface > and returning to the console mode. Type Ctrl B to reactivate it. > > > > Configuration Menu: Enter command > ma > ---- Main > Menu --------------------------------------------------------------- > > Command Description > ------- ----------- > BOot [PRI|ALT|<path>] Boot from specified path > PAth [PRI|ALT] [<path>] Display or modify a path > SEArch [DIsplay|IPL] [<path>] Search for boot devices > > COnfiguration menu Displays or sets boot values > INformation menu Displays hardware information > SERvice menu Displays service commands > > DIsplay Redisplay the current menu > HElp [<menu>|<command>] Display help for menu or command > RESET Restart the system > ---- > Main Menu: Enter command or menu > bo > > Interact with IPL (Y, N, or Cancel)?> y > Booting... > Boot IO Dependent Code (IODC) revision 1 > > > HARD Booted. > palo ipl 1.14 r...@duet Sat Apr 8 16:08:16 EDT 2006 > > Skipping extended partition 6 - beyond reach of IPL > > Partition Start(MB) End(MB) Id Type > > > 1 1 31 f0 Palo > > > 2 32 156 83 ext2 > > > 5 157 67413 83 ext2 > > PALO(F0) partition contains: > > 0/vmlinux64 6300839 bytes @ 0x48000 > > > Information: No console specified on kernel command line. This is normal. > > PALO will choose the console currently used by firmware (serial).Current > command line: > > 2/vmlinux root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102 > > 0: 2/vmlinux > > 1: root=/dev/sda5 > > 2: initrd=2/initrd.img > > 3: HOME=/ > > 4: console=ttyS0 > > 5: TERM=vt102 > > > <#> edit the numbered field > > 'b' boot with this command line > > 'r' restore command line > > 'l' list dir > > ? 0 b > > > Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 > palo_kernel=2/vmlinux' > > Selected kernel: /vmlinux from partition 2 > > Selected ramdisk: /initrd.img from partition 2 > > ELF64 executable > > Entry 00100000 first 00100000 n 3 > > Segment 0 load 00100000 size 4648960 mediaptr 0x1000 > > Segment 1 load 005c4000 size 395160 mediaptr 0x470000 > > Segment 2 load 00628000 size 304384 mediaptr 0x4d1000 > > Loading ramdisk 6339147 bytes @ 3f9e3000... > > Branching to kernel entry point 0x00100000. If this is the last > > message you see, you may need to switch your console. This is > > a common symptom -- search the FAQ and mailing list at parisc-linux.org > > > Linux version 2.6.26 (2.6.26) (r...@sys0t-debian) (gcc version 4.3.2 (GCC) ) > #1 SMP Mon Mar 16 07:17:55 MDT 2009 > FP[0] enabled: Rev 1 Model 16 > The 64-bit Kernel has started... > console [ttyB0] enabled > Initialized PDC Console for debugging. > Determining PDC firmware type: 64 bit PAT. > model 00005cc0 00000491 00000000 00000002 28f7f76d 100000f0 00000008 > 000000b2 000000b2 > vers 00000203 > CPUID vers 17 rev 8 (0x00000228) > capabilities 0x1 > model 9000/800/N4000-44 > Memory Ranges: > 0) Start 0x0000000000000000 End 0x000000007fffffff Size 2048 MB > 1) Start 0x0000000180000000 End 0x00000001ffffffff Size 2048 MB > Total Memory: 4096 MB > initrd: 7f9e3000-7ffeea4b > initrd: reserving 3f9e3000-3ffeea4b (mem_max 100000000) > SMP: bootstrap CPU ID is 0 > Built 2 zonelists in Zone order, mobility grouping on. Total pages: 1034240 > Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 > palo_kernel=2/vmlinux > PID hash table entries: 4096 (order: 12, 32768 bytes) > Console: colour dummy device 160x64 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Memory: 4109824k/4194304k available (3121k kernel code, 83764k reserved, > 1370k data, 300k init) > virtual kernel memory layout: > vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) > memory : 0x0000000040000000 - 0x0000000240000000 (8192 MB) > .init : 0x0000000040628000 - 0x0000000040673000 ( 300 kB) > .data : 0x000000004040c518 - 0x0000000040563000 (1370 kB) > .text : 0x0000000040100000 - 0x000000004040c518 (3121 kB) > Security Framework initialized > SELinux: Disabled at boot. > Capability LSM initialized > Mount-cache hash table entries: 256 > Brought up 1 CPUs > net_namespace: 1168 bytes > NET: Registered protocol family 16 > EISA bus registered > Searching for devices... > Found devices: > 1. Prelude W 440 at 0xfffffffffed25000 [37] { 0, 0x0, 0x5cc, 0x00004 } > 2. Prelude W 440 at 0xfffffffffed2d000 [45] { 0, 0x0, 0x5cc, 0x00004 } > 3. Prelude W 440 at 0xfffffffffed65000 [101] { 0, 0x0, 0x5cc, 0x00004 } > 4. Prelude W 440 at 0xfffffffffed6d000 [109] { 0, 0x0, 0x5cc, 0x00004 } > 5. DEW BC Runway Port at 0xfffffffffed24000 [36] { 7, 0x0, 0x584, 0x0000c } > 6. DEW BC Runway Port at 0xfffffffffed2c000 [44] { 7, 0x0, 0x584, 0x0000c } > 7. DEW BC Runway Port at 0xfffffffffed64000 [100] { 7, 0x0, 0x584, 0x0000c } > 8. DEW BC Runway Port at 0xfffffffffed6c000 [108] { 7, 0x0, 0x584, 0x0000c } > 9. Memory at 0xfffffffffedc0000 [192] { 1, 0x0, 0x090, 0x00009 } > 10. IKE I/O BC Merced Port at 0xfffffffffed00000 [0] { 7, 0x0, 0x803, > 0x0000c } > 11. Elroy PCI Bridge at 0xffffffffbffe0000 [0/0] { 13, 0x0, 0x782, 0x0000a } > 12. Elroy PCI Bridge at 0xffffffffbffe2000 [0/1] { 13, 0x0, 0x782, 0x0000a } > 13. Elroy PCI Bridge at 0xffffffffbffe4000 [0/2] { 13, 0x0, 0x782, 0x0000a } > 14. Elroy PCI Bridge at 0xffffffffbffe8000 [0/4] { 13, 0x0, 0x782, 0x0000a } > 15. Elroy PCI Bridge at 0xffffffffbffea000 [0/5] { 13, 0x0, 0x782, 0x0000a } > 16. Elroy PCI Bridge at 0xffffffffbfff0000 [0/8] { 13, 0x0, 0x782, 0x0000a } > 17. Elroy PCI Bridge at 0xffffffffbfff4000 [0/10] { 13, 0x0, 0x782, > 0x0000a } > 18. Elroy PCI Bridge at 0xffffffffbfff8000 [0/12] { 13, 0x0, 0x782, > 0x0000a } > 19. IKE I/O BC Merced Port at 0xfffffffffed40000 [1] { 7, 0x0, 0x803, > 0x0000c } > 20. Elroy PCI Bridge at 0xfffffffffece0000 [1/0] { 13, 0x0, 0x782, 0x0000a } > 21. Elroy PCI Bridge at 0xfffffffffece4000 [1/2] { 13, 0x0, 0x782, 0x0000a } > 22. Elroy PCI Bridge at 0xfffffffffece8000 [1/4] { 13, 0x0, 0x782, 0x0000a } > 23. Elroy PCI Bridge at 0xfffffffffecf0000 [1/8] { 13, 0x0, 0x782, 0x0000a } > 24. Elroy PCI Bridge at 0xfffffffffecf4000 [1/10] { 13, 0x0, 0x782, > 0x0000a } > 25. Elroy PCI Bridge at 0xfffffffffecf8000 [1/12] { 13, 0x0, 0x782, > 0x0000a } > Enabling PDC_PAT chassis codes support v0.05 > > ********** VIRTUAL FRONT PANEL ********** > System Boot detected > ***************************************** > processor system initialization 1C00 > > ***************************************** > > ************ EARLY BOOT VFP ************* > End of early boot detected > ***************************************** > Releasing cpu 3 now, hpa=fffffffffed6d000 > FP[3] enabled: Rev 1 Model 16 > CPU(s): 4 x PA8500 (PCX-W) at 440.000000 MHz > Setting cache flush threshold to 100000 (4 CPUs online) > SBA found Ike rev 2 at 0xfffffffffed00000 > SBA found Ike rev 2 at 0xfffffffffed40000 > proc_dir_entry 'sba_iommu' already registered > Backtrace: > [<000000004011bc58>] parisc_show_stack+0x48/0xe8 > [<000000004011bd0c>] show_stack+0x14/0x20 > [<00000000402c7818>] memcpy+0x28/0x40 > [<00000000402243dc>] __proc_create+0xf4/0x188 > [<000000004032cdf0>] driver_probe_device+0x148/0x278 > [<000000004010347c>] ret_from_kernel_thread+0x24/0x40 > > proc_dir_entry 'sba_iommu-bitmap' already registered > Backtrace: > [<000000004011bc58>] parisc_show_stack+0x48/0xe8 > [<000000004011bd0c>] show_stack+0x14/0x20 > [<00000000402c7818>] memcpy+0x28/0x40 > [<00000000402243dc>] __proc_create+0xf4/0x188 > [<000000004032cdf0>] driver_probe_device+0x148/0x278 > [<000000004010347c>] ret_from_kernel_thread+0x24/0x40 > > Elroy version TR2.2 (0x3) found at 0xffffffffbffe0000 > Elroy version TR2.2 (0x3) found at 0xffffffffbffe2000 > Elroy version TR3.0 (0x4) found at 0xffffffffbffe4000 > Elroy version TR3.0 (0x4) found at 0xffffffffbffe8000 > Elroy version TR3.0 (0x4) found at 0xffffffffbffea000 > Elroy version TR3.0 (0x4) found at 0xffffffffbfff0000 > Elroy version TR3.0 (0x4) found at 0xffffffffbfff4000 > Elroy version TR3.0 (0x4) found at 0xffffffffbfff8000 > Elroy version TR3.0 (0x4) found at 0xfffffffffece0000 > Elroy version TR3.0 (0x4) found at 0xfffffffffece4000 > Elroy version TR3.0 (0x4) found at 0xfffffffffece8000 > Elroy version TR3.0 (0x4) found at 0xfffffffffecf0000 > Elroy version TR3.0 (0x4) found at 0xfffffffffecf4000 > PCI: Address space collision on region 0 of device 0000:d0:00.0 > [70e0800:70e08ff] > Elroy version TR3.0 (0x4) found at 0xfffffffffecf8000 > powersw: Soft power switch support not available. > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 6190k freed > Chassis warnings not supported. > unwind_init: start = 0x404a7224, end = 0x404d19c4, entries = 10874 > Performance monitoring counters enabled for Prelude W 440 > audit: initializing netlink socket (disabled) > type=2000 audit(1237216652.238:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 8040 > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PDC Stable Storage facility v0.30 > STI GSC/PCI core graphics driver Version 0.9a > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial 0000:00:04.0: enabling device (0146 -> 0147) > 0000:00:04.0: ttyS0 at MMIO 0xffffffff80000000 (irq = 70) is a 16550A > console handover: boot [ttyB0] -> real [ttyS0] > 0000:00:04.0: ttyS1 at MMIO 0xffffffff80000008 (irq = 70) is a 16550A > 0000:00:04.0: ttyS2 at MMIO 0xffffffff80000010 (irq = 70) is a 16550A > serial 0000:00:05.0: enabling device (0000 -> 0003) > serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143) > 0000:00:05.0: ttyS3 at MMIO 0xffffffff80003000 (irq = 71) is a 16550A > Couldn't register serial port 0000:00:05.0: -28 > brd: module loaded > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 17 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > Freeing unused kernel memory: <0>------------[ cut here ]------------ > Badness at arch/parisc/kernel/smp.c:323 > > YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > PSW: 00001000000001001111111100001110 Not tainted > r00-03 000000ff0804ff0e 00000000406242a0 0000000040126378 00000000405f8740 > r04-07 0000000040612aa0 0000000000000000 0000000000000001 00000000bfc60220 > r08-11 000000004066d668 0000000040613aa0 0000000000000000 00000000bfc60110 > r12-15 00000000406142a0 0000000000000001 00000000406202a0 0000000040622aa0 > r16-19 00000000406132a0 0406152a0 00000000406152a0 0000000000000004 > r20-23 0000000000000000 0000000040673000 00000000405f31a0 0000000000000001 > r24-27 0000000000000001 0000000000000000 0000000000000002 0000000040612aa0 > r28-31 000000000800000e 00000000bfc605a0 00000000bfc605d0 0000000000000004 > sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040126388 > 00000000401263IR: 03ffe01f ISR: 0000000000000000 IOR: 0000000000000000 > CPU: 0 CR30: 00000000bfc60000 CR31: 0000000010578000 > ORIG_R28: 00000000bf801be0 > IAOQ[0]: smp_call_function+0x70/0x3a0 > IAOQ[1]: smp_call_function+0x74/0x3a0 > RP(r2): smp_call_function+0x60/0x3a0 > Backtrace: > [<00000000401556d8>] on_each_cpu+0x28/0x68 > [<000000004011ad08>] flush_data_cache+0x28/0x38 > [<000000004011a17c>] free_initmem+0x94/0x340 > [<0000000040119324>] 0x228 > [<0000000040628638>] kernel_init+0x4b8/0x508 > > 300k freed > > ********** VIRTUAL FRONT PANEL ********** > System Boot detected > ***************************************** > processor system initialization 1C00 > > ***************************************** > > ************ EARLY BOOT VFP ************* > End of early boot detected > ***************************************** > Begin: Loading essential drivers ... SCSI subsystem initialized > done. > Begin: Running /scripts/init-premount ... Linux Tulip driver version > 1.1.15-NAPI (Feb 27, 2007) > tulip 0000:00:00.0: enabling device (0140 -> 0143) > tulip0: no phy info, aborting mtable build > tulip0: MII transceiver #1 config 1000 status 7809 advertising 0061. > eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xffffffff80004000, > 00:10:83:96:71:d4, IRQ 66. > sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003) > sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143) > sym0: <895> rev 0x1 at pci 0000:00:01.0 irq 67 > sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking > sym0: SCSI BUS has been reset. > sym0: SCSI BUS mode change from SE to SE. > sym0: SCSI BUS has been reset. > scsi0 : sym-2.2.3 > scsi 0:0:2:0: CD-ROM HP DVD-ROM 304 2.01 PQ: 0 ANSI: 2 > target0:0:2: Beginning Domain Validation > target0:0:2: asynchronous > target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) > target0:0:2: Domain Validation skipping write tests > target0:0:2: Ending Domain Validation > sym53c8xx 0000:00:02.0: enabling device (0146 -> 0147) > sym1: <875> rev 0x14 at pci 0000:00:02.0 irq 68 > sym1: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking > sym1: SCSI BUS has been reset. > scsi1 : sym-2.2.3 > scsi 1:0:6:0: Direct-Access SEAGATE ST373405LC 0003 PQ: 0 ANSI: 3 > target1:0:6: tagged command queuing enabled, command queue depth 16. > target1:0:6: Beginning Domain Validation > target1:0:6: asynchronous > target1:0:6: wide asynchronous > target1:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) > target1:0:6: Domain Validation skipping write tests > target1:0:6: Ending Domain Validation > sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003) > sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143) > sym2: <875> rev 0x14 at pci 0000:00:02.1 irq 69 > sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking > sym2: SCSI BUS has been reset. > scsi2 : sym-2.2.3 > scsi 2:0:6:0: Direct-Access SEAGATE ST373405LC 0003 PQ: 0 ANSI: 3 > target2:0:6: tagged command queuing enabled, command queue depth 16. > target2:0:6: Beginning Domain Validation > target2:0:6: asynchronous > target2:0:6: wide asynchronous > target2:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) > target2:0:6: Domain Validation skipping write tests > target2:0:6: Ending Domain Validation > sym53c8xx 0000:20:00.0: enabling device (0000 -> 0003) > sym53c8xx 0000:20:00.0: enabling SERR and PARITY (0003 -> 0143) > sym3: <896> rev 0x7 at pci 0000:20:00.0 irq 72 > sym3: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking > sym3: SCSI BUS has been reset. > scsi3 : sym-2.2.3 > scsi 3:0:0:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:0: tagged command queuing enabled, command queue depth 16. > target3:0:0: Beginning Domain Validation > target3:0:0: asynchronous > target3:0:0: wide asynchronous > target3:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:0: Domain Validation skipping write tests > target3:0:0: Ending Domain Validation > scsi 3:0:1:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:1: tagged command queuing enabled, command queue depth 16. > target3:0:1: Beginning Domain Validation > target3:0:1: asynchronous > target3:0:1: wide asynchronous > target3:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:1: Domain Validation skipping write tests > target3:0:1: Ending Domain Validation > scsi 3:0:2:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:2: tagged command queuing enabled, command queue depth 16. > target3:0:2: Beginning Domain Validation > target3:0:2: asynchronous > target3:0:2: wide asynchronous > target3:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:2: Domain Validation skipping write tests > target3:0:2: Ending Domain Validation > scsi 3:0:3:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:3: tagged command queuing enabled, command queue depth 16. > target3:0:3: Beginning Domain Validation > target3:0:3: asynchronous > target3:0:3: wide asynchronous > target3:0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:3: Domain Validation skipping write tests > target3:0:3: Ending Domain Validation > scsi 3:0:4:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:4: tagged command queuing enabled, command queue depth 16. > target3:0:4: Beginning Domain Validation > target3:0:4: asynchronous > target3:0:4: wide asynchronous > target3:0:4: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:4: Domain Validation skipping write tests > target3:0:4: Ending Domain Validation > scsi 3:0:5:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target3:0:5: tagged command queuing enabled, command queue depth 16. > target3:0:5: Beginning Domain Validation > target3:0:5: asynchronous > target3:0:5: wide asynchronous > target3:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:5: Domain Validation skipping write tests > target3:0:5: Ending Domain Validation > scsi 3:0:8:0: Direct-Access COMPAQ BF07289BC4 HPB1 PQ: 0 ANSI: 3 > target3:0:8: tagged command queuing enabled, command queue depth 16. > target3:0:8: Beginning Domain Validation > target3:0:8: asynchronous > target3:0:8: wide asynchronous > target3:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target3:0:8: Domain Validation skipping write tests > target3:0:8: Ending Domain Validation > scsi 3:0:15:0: Processor COMPAQ PROLIANT 4L7E*DB 2.30 PQ: 0 ANSI: > 2 > target3:0:15: Beginning Domain Validation > scsi 3:0:15:0: phase change 6-7 6...@0025ffa0 resid=4. > target3:0:15: asynchronous > target3:0:15: Ending Domain Validation > sym53c8xx 0000:20:00.1: enabling device (0000 -> 0003) > sym53c8xx 0000:20:00.1: enabling SERR and PARITY (0003 -> 0143) > sym4: <896> rev 0x7 at pci 0000:20:00.1 irq 73 > sym4: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking > sym4: SCSI BUS has been reset. > scsi4 : sym-2.2.3 > scsi 4:0:0:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:0: tagged command queuing enabled, command queue depth 16. > target4:0:0: Beginning Domain Validation > target4:0:0: asynchronous > target4:0:0: wide asynchronous > target4:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:0: Domain Validation skipping write tests > target4:0:0: Ending Domain Validation > scsi 4:0:1:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:1: tagged command queuing enabled, command queue depth 16. > target4:0:1: Beginning Domain Validation > target4:0:1: asynchronous > target4:0:1: wide asynchronous > target4:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:1: Domain Validation skipping write tests > target4:0:1: Ending Domain Validation > scsi 4:0:2:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:2: tagged command queuing enabled, command queue depth 16. > target4:0:2: Beginning Domain Validation > target4:0:2: asynchronous > target4:0:2: wide asynchronous > target4:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:2: Domain Validation skipping write tests > target4:0:2: Ending Domain Validation > scsi 4:0:3:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:3: tagged command queuing enabled, command queue depth 16. > target4:0:3: Beginning Domain Validation > target4:0:3: asynchronous > target4:0:3: wide asynchronous > target4:0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:3: Domain Validation skipping write tests > target4:0:3: Ending Domain Validation > scsi 4:0:4:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:4: tagged command queuing enabled, command queue depth 16. > target4:0:4: Beginning Domain Validation > target4:0:4: asynchronous > target4:0:4: wide asynchronous > target4:0:4: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:4: Domain Validation skipping write tests > target4:0:4: Ending Domain Validation > scsi 4:0:5:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:5: tagged command queuing enabled, command queue depth 16. > target4:0:5: Beginning Domain Validation > target4:0:5: asynchronous > target4:0:5: wide asynchronous > target4:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:5: Domain Validation skipping write tests > target4:0:5: Ending Domain Validation > scsi 4:0:8:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 > target4:0:8: tagged command queuing enabled, command queue depth 16. > target4:0:8: Beginning Domain Validation > target4:0:8: asynchronous > target4:0:8: wide asynchronous > target4:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > target4:0:8: Domain Validation skipping write tests > target4:0:8: Ending Domain Validation > sym53c8xx 0000:d0:00.0: enabling device (0000 -> 0003) > sym53c8xx 0000:d0:00.0: enabling SERR and PARITY (0003 -> 0143) > > ************* SYSTEM ALERT ************** > SYSTEM NAME: uninitialized > DATE: 03/16/2009 TIME: 15:18:15 > ALERT LEVEL: 7 = reserved > > REASON FOR ALERT > SOURCE: 0 = unknown, no source stated > SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF > PROBLEM DETAIL: 0 = no problem detail > > LEDs: RUN ATTENTION FAULT REMOTE POWER > ON FLASH OFF ON ON > > 0x0000187000FF6292 00000000 00000000 - type 0 = Data Field Unused > 0x5800187000FF6292 00006D02 100F120F - type 11 = Timestamp 03/16/2009 > 15:18:15 > A: ack read of this entry - X: Disable all future alert messages > Anything else skip redisplay the log entry > ->Choice:a > ***************************************** > <<End of error message>> > > We found a similiar error at http://lkml.org/lkml/2008/7/16/327 that > explains the inability to boot a 2.6.26 kernel that has the > CONFIG_PRINTK_TIME flag set to y. We recompiled a version of that kernel > with the flag set to n (it was already set to that value) and we get a > little farther in the boot sequence but end up with the same error message. > What/how can we get this version of the kernel to boot? We are attempting > to run Debian 5.0 but end up with a non-working df if we use kernel > 2.6.18-6-parisc64 (which is the version of the kernel that is installed with > 4.0). 2.6.18-6 is the only other linux kernel that we have successfully > booted with. > Thanks, > Marc
[Adding debian-hppa to CC and quoting in full] Is this a known issue, has it been fixed in current kernels from unstable? Cheers, Moritz -- To UNSUBSCRIBE, email to debian-hppa-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org