Hi, Sorry, I don't have any experience using the qemu emulator. Helge is the expert on this and he may be able to provide guidance.
Regards, Dave On 2020-07-20 4:20 p.m., Michael Biebl wrote: > Control: tags -1 + help > Control: user -1 debian-hppa@lists.debian.org > Control: usertags -1 + hppa > > Hi Anton, > > hppa is no longer a supported architecture. > If you want to see this fixed, you'll need to provide a patch and get > that accepted upstream or have to work with someone who can help with that. > For that, I've CCed the hppa mailing list and usertagged the bug report > accordingly. > Last time we had an hppa issue, John David Anglin was very helpful. > Maybe he can chime in here as well > > Regards, > Michael > > > On Sat, 11 Jul 2020 01:01:48 +0800 > =?UTF-8?B?0JDQvdGC0L7QvSDQmtC+0YfQutC+0LI=?= <anton.koch...@gmail.com> > wrote: >> Package: systemd-sysv >> Version: 245.6-1 >> >> I attached installation and running scripts at the bottom. I ran >> Debian 10.0.0 installation cdrom with Qemu 4.2.0, installation went >> fine but the bus error appears all the time while running. >> >> Let me know if you need this VM qcow2 image. CDROM image downloaded from >> https://cdimage.debian.org/cdimage/ports/current/debian-10.0.0-hppa-NETINST-1.iso >> >> QEMU emulator version 4.2.0 (qemu-4.2.0-7.fc32) >> >> Formatting 'debian-10.0.0-hppa-hdd.qcow2', fmt=qcow2 size=4294967296 >> cluster_size=65536 lazy_refcounts=off refcount_bits=16 >> WARNING: Image format was not specified for 'json:{"fat-type": 0, >> "backing": {"driver": "vvfat_write_target"}, "dir": "share/", >> "driver": "vvfat", "floppy": false, "rw": true, "write-target": >> {"driver": "qcow", "file": {"driver": "file", "filename": >> "/var/tmp/vl.2AiM5z"}}}' and probing guessed raw. >> Automatically detecting the format is dangerous for raw >> images, write operations on block 0 will be restricted. >> Specify the 'raw' format explicitly to remove the restrictions. >> qemu-system-hppa: warning: Guest expects a stronger memory ordering >> than the host provides >> This may cause strange/hard to debug errors >> >> Firmware Version 6.1 >> >> Duplex Console IO Dependent Code (IODC) revision 1 >> >> Memory Test/Initialization Completed >> >> ------------------------------------------------------------------------------ >> (c) Copyright 2017-2018 Helge Deller <del...@gmx.de> and SeaBIOS >>developers. >> ------------------------------------------------------------------------------ >> >> Processor Speed State Coprocessor State Cache Size >> --------- -------- --------------------- ----------------- ---------- >> 0 250 MHz Active Functional 0 KB >> 1 250 MHz Idle Functional 0 KB >> 2 250 MHz Idle Functional 0 KB >> 3 250 MHz Idle Functional 0 KB >> >> >> Available memory: 512 MB >> Good memory required: 16 MB >> >> Primary boot path: FWSCSI.0.0 >> Alternate boot path: FWSCSI.1.0 >> Console path: SERIAL_1.9600.8.none >> Keyboard path: PS2 >> >> Available boot devices: >> 1. DVD/CD [lsi 00:00.0 1:0 Drive QEMU QEMU CD-ROM 2.5+] >> 2. lsi 00:00.0 0:0 Drive QEMU QEMU HARDDISK 2.5+ >> 3. lsi 00:00.0 2:0 Drive QEMU QEMU HARDDISK 2.5+ >> >> Booting from DVD/CD [lsi 00:00.0 1:0 Drive QEMU QEMU CD-ROM 2.5+] >> >> Booting... > -- John David Anglin dave.ang...@bell.net