Package: hurd
Version: gnumach 20050501-4
Severity: normal

After updating to gnumach(-dbg) 20050801-1, I get a kernel panic while 
booting (the problem didn't exist with hurd_20050513-4:

GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x20100000
GNU Mach 1.3
AT386 boot: physical memory from 0x0 to 0x20100000
pcibios_init : BIOS32 Service Directory structure at 0xp
pcibios_init : BIOS32 Service Directory entry at 0xfdb10
pcibios_init : PCI BIOS revision 2.10 entry at 0xfdb31
Probing PCI hardware.
ide: SiS 5513 (dual FIFO) DMA Bus Mastering IDE 
    Controller on PCI bus 0 function 21
    ide0: BM-DMA at 0xff00-0xff07
    ide1: BM-DMA at 0xff08-0xff0f
hd0: Maxtor 2F040L0, 39205MB w/2048kB Cache, CHS=4998/255/63
hd1: WDC WD2000JB-00GVA0, 131071MB w/8192kB Cache, CHS=16709/255/63
hd2: _NEC DV-5700B, ATAPI CDROM drive
hd3: R/RW 12x8x32, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa:     SPP port present
ppa:     ECP with a i byte FIFO present
ppa:     PS/2 bidirectional port present
ppa:     Passed Intel bug check.
ppa:     EPP 1.9 with hardware direction protocol
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, [EMAIL PROTECTED]
 http://www.scyld.com/network/rtl8139.html
sis900.c: modified v1.06.11  4/30/2002
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11,  0: b:6a:5f:39:ec.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <[EMAIL PROTECTED]>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
RV¾ è( ^¿øf<-ƒ} : wavelan_probe(): invalid base address
RV¾ è( ^¿øf<-ƒ} : D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2 hd0s3
 hd1: hd1s1 hd1s2 hd1s3 hd1s4
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)

module 0: /hurd/ext2fs.static --multiboot-command-line=${kernel-command-line} 
--host-priv-port=${host-port} --device-master-port=${device-port} 
--exec-server-task=${exec-task} -T typed ${root} $(task-create) 
$(task-resume) 
module 1: /lib/ld.so.1 /hurd/exec $(exec-task=task-create)                      
                                                                                
                                                               
2 multiboot modules                                                             
                                                                                
                                                                         
task loaded: /hurd/ext2fs.static 
--multiboot-command-line=/boot/gnumach-dbg.gz root=device:hd0s1 
--host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed 
device:hd0s1
task loaded: /lib/ld.so.1 /hurd/exec

start /hurd/ext2fs.static: eth0: Media Link On 100mbps full-duplex 


My processor is an AMD Athlon-XP.
uppermem was set to 524288 in the grub.conf.

This is some information about my hardware (recieved by Linux):
SchlesisPC ~ # lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
        Subsystem: ASRock Incorporation Unknown device 0746
        Flags: bus master, medium devsel, latency 0
        Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [c0] AGP version 3.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 
[Normal decode])
        Flags: bus master, fast devsel, latency 32
        Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
        Memory behind bridge: cdd00000-cfefffff
        Prefetchable memory behind bridge: bda00000-cdbfffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] 
(rev 25)
        Flags: bus master, medium devsel, latency 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
        Flags: medium devsel
        I/O ports at 0c00 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 
[Master])
        Subsystem: ASRock Incorporation Unknown device 5513
        Flags: bus master, medium devsel, latency 128
        I/O ports at ff00 [size=16]

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound 
Controller (rev a0)
        Subsystem: ASRock Incorporation Unknown device 7012
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at dc00 [size=256]
        I/O ports at d800 [size=128]
        Capabilities: [48] Power Management version 2

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
        Subsystem: ASRock Incorporation Unknown device 7001
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
        Subsystem: ASRock Incorporation Unknown device 7001
        Flags: bus master, medium devsel, latency 32, IRQ 3
        Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 
(prog-if 20 [EHCI])
        Subsystem: ASRock Incorporation Unknown device 7001
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 2

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast 
Ethernet (rev 90)
        Subsystem: ASRock Incorporation Unknown device 8201
        Flags: bus master, medium devsel, latency 32, IRQ 19
        I/O ports at d400 [size=256]
        Memory at cfffc000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 50000000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] 
(rev a1) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8180
        Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 17
        Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (32-bit, prefetchable) [size=128M]
        [virtual] Expansion ROM at cfee0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

SchlesisPC irq # cat /proc/interrupts
           CPU0
  0:    2332497    IO-APIC-edge  timer
  1:        404    IO-APIC-edge  i8042
  7:          0    IO-APIC-edge  parport0
  8:          2    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:      10647    IO-APIC-edge  i8042
 14:      80367    IO-APIC-edge  ide0
 15:        133    IO-APIC-edge  ide1
 16:   26351698   IO-APIC-level  ehci_hcd:usb1
 17:     958388   IO-APIC-level  nvidia
 18:     378289   IO-APIC-level  SiS SI7012
 19:       1122   IO-APIC-level  eth0
NMI:          0
LOC:    2332390
ERR:          0
MIS:          0

Reply via email to