Hi, No, I need public address...
-----Original Message----- From: Joan Cirer [mailto:[EMAIL PROTECTED] Sent: Monday, July 09, 2001 10:38 AM To: 'NDSoftware' Cc: 'Mailing-List Debian (IPv6)' Subject: RE: IPv6 Hi! Why don't you use EUI addresses? It will be easier to administer and the configuration can be done atomatically with the radvd daemon or with zebra Your adresses will be constructed from the Ethenet MAC address with ffef in the middle and always with a mask /64 as you can see: 3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:a0:c9:dd:66:dc brd ff:ff:ff:ff:ff:ff inet6 fe80::2a0:c9ff:fedd:66dc/10 scope link inet6 3ffe:29a1:22:1:2a0:c9ff:fedd:66dc/64 scope global Best regards -----Original Message----- From: NDSoftware [mailto:[EMAIL PROTECTED] Sent: Monday, July 09, 2001 10:23 AM To: 'Saku Ytti' Cc: Mailing-List Debian (IPv6) Subject: RE: IPv6 My network is like this: HULK eth1 10.0.1.1/255.255.255.0 3ffe:304:126:ffff:a0:a1::1/127 -> BLUD eth0 10.0.1.2 3ffe:304:126:ffff:a0:a1::2/127 HULK have a access to Internet my sit1... The problem can be the mask of IP IPv6 ? If yes what's mask do I use ? I want: - ping hulk from blud - ping blud from hulk - access to internet on blud by hulk (the default gateway of blud must hulk) My problem: - I can't ping hulk from blud & blud from hulk (when I trace the 1st hope is ::1 for blud and for blud and for hulk 3ffe:304:126:ffff::1) - I can't set the default route on blud (all traffic is forward to ::1) - Blud must access to Internet by hulk ifconfig of hulk: eth0 Link encap:Ethernet HWaddr 00:10:4B:44:56:CC inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: 3ffe:304:126:ffff:a0:a0:0:1/127 Scope:Global inet6 addr: fe80::10:4b44:56cc/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:141317 errors:0 dropped:0 overruns:0 frame:0 TX packets:155460 errors:0 dropped:0 overruns:0 carrier:0 collisions:13 txqueuelen:100 Interrupt:5 Base address:0x220 eth1 Link encap:Ethernet HWaddr 00:60:97:95:CC:55 inet addr:10.0.1.1 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: 3ffe:304:126:ffff:a0:a1:0:1/127 Scope:Global inet6 addr: fe80::60:9795:cc55/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:84057 errors:0 dropped:0 overruns:0 frame:0 TX packets:86645 errors:0 dropped:0 overruns:0 carrier:0 collisions:2 txqueuelen:100 Interrupt:10 Base address:0x300 eth2 Link encap:Ethernet HWaddr 00:A0:24:34:1D:91 inet addr:10.0.2.1 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: 3ffe:304:126:ffff:a0:a2:0:1/127 Scope:Global inet6 addr: fe80::a0:2434:1d91/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:6 collisions:0 txqueuelen:100 Interrupt:11 Base address:0x210 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:62.4.18.114 P-t-P:194.206.78.3 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:65880 errors:0 dropped:0 overruns:0 frame:0 TX packets:61222 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 sit0 Link encap:IPv6-in-IPv4 inet6 addr: 3ffe:304:126:ffff::2/0 Scope:Global inet6 addr: ::10.0.2.1/96 Scope:Compat inet6 addr: ::127.0.0.1/96 Scope:Unknown inet6 addr: ::10.0.1.1/96 Scope:Compat inet6 addr: ::10.0.0.1/96 Scope:Compat inet6 addr: ::62.4.18.114/96 Scope:Compat UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 sit1 Link encap:IPv6-in-IPv4 inet6 addr: fe80::a00:201/10 Scope:Link inet6 addr: fe80::a00:101/10 Scope:Link inet6 addr: fe80::a00:1/10 Scope:Link inet6 addr: fe80::3e04:1272/10 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:607 errors:0 dropped:0 overruns:0 frame:0 TX packets:607 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ifconfig of blud: eth0 Link encap:Ethernet HWaddr 00:20:AF:B8:E3:EB inet addr:10.0.1.2 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: 3ffe:304:126:ffff:a0:a1:0:2/127 Scope:Global inet6 addr: fe80::20:afb8:e3eb/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:89842 errors:0 dropped:0 overruns:0 frame:0 TX packets:86595 errors:0 dropped:0 overruns:0 carrier:6 collisions:2 txqueuelen:100 Interrupt:5 Base address:0x210 eth1 Link encap:Ethernet HWaddr 00:20:AF:B9:3C:D7 inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0 inet6 addr: 3ffe:304:126:ffff:a0:a3:0:1/127 Scope:Global inet6 addr: fe80::20:afb9:3cd7/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48020 errors:0 dropped:0 overruns:0 frame:0 TX packets:47505 errors:0 dropped:0 overruns:0 carrier:0 collisions:3 txqueuelen:100 Interrupt:11 Base address:0x220 eth2 Link encap:Ethernet HWaddr 00:60:97:0C:98:03 inet addr:10.0.4.1 Bcast:10.0.4.255 Mask:255.255.255.0 inet6 addr: fe80::60:970c:9803/10 Scope:Link inet6 addr: 3ffe:304:126:ffff:a0:a4:0:1/127 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:45469 errors:0 dropped:0 overruns:0 frame:0 TX packets:43966 errors:0 dropped:0 overruns:0 carrier:0 collisions:2 txqueuelen:100 Interrupt:10 Base address:0x300 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 Thanks -----Original Message----- From: Saku Ytti [mailto:[EMAIL PROTECTED] Sent: Monday, July 09, 2001 10:04 AM To: 'Mailing-List Debian (IPv6)' Subject: Re: IPv6 On Mon, Jul 09, 2001 at 09:56:03AM +0200, NDSoftware wrote: Depends what you want to do. Do you actually want them on different networks or same? If you want them on same network make larger network. Or use 3ffe:304:126:ffff:a0:a1:0::/127 and 3ffe:304:126:ffff:a0:a1:0:1/127. If you want them on different networks add static route. If you can't, this is not ipv6-related and you should read some generic IP books. > OK but how I can fix it ? > > -----Original Message----- > From: Saku Ytti [mailto:[EMAIL PROTECTED] > Sent: Monday, July 09, 2001 6:42 AM > To: NDSoftware > Cc: [EMAIL PROTECTED]; Mailing-List Debian (IPv6) > Subject: Re: IPv6 > > > On Sun, Jul 08, 2001 at 11:21:37PM +0200, NDSoftware wrote: > > blud and hulk are on different LANs and they don't have routes to > one and another. > > > Hello, > > > > I have 2 routers. > > Hulk can ping Internet v6, it's ok but he can't ping Blud. > > Blud can't ping Hulk and can't access to Internet v6. > > > > For ping i use from blud: 3ffe:304:126:ffff:a0:a1:0:1/127 and from > hulk: > > 3ffe:304:126:ffff:a0:a1:0:2/127. > > > > Who can help me ? > > I think its a route problem but how i can fix.... > > > > 1- hulk > > eth1 10.0.1.1 > > 3ffe:304:126:ffff:a0:a1:0:1/127 > > > > route: > > Kernel IPv6 routing table > > Destination Next Hop > > Flags Metric Ref Use Iface > > ::1/128 :: > > U 0 0 0 lo > > ::10.0.0.1/128 :: > > U 0 0 0 lo > > ::10.0.1.1/128 :: > > U 0 0 0 lo > > ::10.0.2.1/128 :: > > U 0 0 0 lo > > ::62.4.18.114/128 :: > > U 0 0 0 lo > > ::127.0.0.1/128 :: > > U 0 0 0 lo > > ::/96 :: > > U 256 0 0 sit0 > > 2000::/16 fe80::d5ba:2246 > > UG 1 0 0 sit1 > > 2001::/16 fe80::d5ba:2246 > > UG 1 0 0 sit1 > > 2002::/16 fe80::d5ba:2246 > > UG 1 0 0 sit1 > > 3ffe:304:126:ffff::2/128 :: > > U 0 90 0 lo > > 3ffe:304:126:ffff:a0:a0:0:1/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a0::/127 :: > > UA 256 0 0 eth0 > > 3ffe:304:126:ffff:a0:a1:0:1/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a1::/127 :: > > UA 256 0 0 eth1 > > 3ffe:304:126:ffff:a0:a2:0:1/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a2::/127 :: > > UA 256 0 0 eth2 > > 3ffe::/16 fe80::d5ba:2246 > > UG 1 90 1 sit1 > > fe80::a00:1/128 :: > > U 0 0 0 lo > > fe80::a00:101/128 :: > > U 0 0 0 lo > > fe80::a00:201/128 :: > > U 0 0 0 lo > > fe80::3e04:1272/128 :: > > U 0 0 0 lo > > fe80::10:4b44:56cc/128 :: > > U 0 6 0 lo > > fe80::60:9795:cc55/128 :: > > U 0 0 0 lo > > fe80::a0:2434:1d91/128 :: > > U 0 0 0 lo > > fe80::/10 :: > > UA 256 0 0 eth0 > > fe80::/10 :: > > UA 256 0 0 eth1 > > fe80::/10 :: > > UA 256 0 0 eth2 > > fe80::/10 :: > > UA 256 0 0 sit0 > > fe80::/10 :: > > UA 256 0 0 sit1 > > ff00::/8 :: > > UA 256 0 0 eth0 > > ff00::/8 :: > > UA 256 0 0 eth1 > > ff00::/8 :: > > UA 256 0 0 eth2 > > ff00::/8 :: > > UA 256 0 0 sit0 > > ff00::/8 :: > > UA 256 0 0 sit1 > > ::/0 :: > > UDA 256 0 0 eth0 > > ::/0 :: > > UDA 256 0 0 eth1 > > ::/0 :: > > UDA 256 0 0 eth2 > > ::/0 :: > > UA 256 0 0 sit0 > > > > 2- blud (connected to hulk by eth1 for hulk) > > eth0 10.0.1.2 > > 3ffe:304:126:ffff:a0:a1:0:2/127 > > > > route: > > Kernel IPv6 routing table > > Destination Next Hop > > Flags Metric Ref Use Iface > > ::1/128 :: > > U 0 4 0 lo > > 3ffe:304:126:ffff:a0:a1:0:2/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a1:0:2/127 :: > > UA 256 0 0 eth0 > > 3ffe:304:126:ffff:a0:a3:0:1/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a3::/127 :: > > UA 256 0 0 eth1 > > 3ffe:304:126:ffff:a0:a4:0:1/128 :: > > U 0 0 0 lo > > 3ffe:304:126:ffff:a0:a4::/127 :: > > UA 256 0 0 eth2 > > fe80::20:afb8:e3eb/128 :: > > U 0 18 1 lo > > fe80::20:afb9:3cd7/128 :: > > U 0 6 0 lo > > fe80::60:970c:9803/128 :: > > U 0 0 0 lo > > fe80::/10 :: > > UA 256 0 0 eth0 > > fe80::/10 :: > > UA 256 0 0 eth1 > > fe80::/10 :: > > UA 256 0 0 eth2 > > ff00::/8 :: > > UA 256 0 0 eth0 > > ff00::/8 :: > > UA 256 0 0 eth1 > > ff00::/8 :: > > UA 256 0 0 eth2 > > ::/0 :: > > UDA 256 0 0 eth0 > > ::/0 :: > > UDA 256 0 0 eth1 > > ::/0 :: > > UDA 256 0 0 eth2 > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > > -- > ytti > -- ytti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]