-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,
I will paste all i've done with my debian potato box with
linux-2.2.20-usagi-3.1 and GNU Zebra 0.92a, and still have problems
getting farther my other side peer, and www.6bone.net:

# Setting up tunnel:
ip tunnel add ptla mode sit remote 200.69.223.237 local 196.3.79.204
ttl 64
ip link set ptla up mtu 1420
ip addr add 3ffe:8260:ff:93::2/128 dev ptla
route -A inet6 add 3ffe:8260:ff:93::1 dev ptla
# This works fine, i can ping6 and traceroute my other peer side

# Setting up Zebra bgpd.conf
router bgp 64602
 bgp router-id 196.3.79.204
 neighbor 3ffe:8260:ff:93::1 remote-as 45328
 neighbor 3ffe:8260:ff:93::1 description Conexion pTLA
 neighbor 3ffe:8260:ff:93::1 interface ptla
 no neighbor 3ffe:8260:ff:93::1 activate
!
 address-family ipv6
 network 3ffe:8260:1301::/48
 neighbor 3ffe:8260:ff:93::1 activate
 neighbor 3ffe:8260:ff:93::1 next-hop-self
 exit-address-family

# my bgp summary
bgpd> sh ipv6 bgp summary
BGP router identifier 196.3.79.204, local AS number 64602
198 BGP AS-PATH entries
0 BGP community entries

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down
State/PfxRcd3ffe:8260:ff:93::1
                4 45328    4115      75        0    0    0 00:29:40
   261

Total number of neighbors 1

# Soon i get conection working
Proto Recv-Q Send-Q Local Address           Foreign Address
State
tcp        0      0 3ffe:8260:ff:93::2:1270 3ffe:8260:ff:93::1:179
ESTABLISHED

# My bgp neighbor
bgpd> sh ipv6 bgp neighbors
BGP neighbor is 3ffe:8260:ff:93::1, remote AS 45328, local AS 64602,
external link
 Description: Conexion pTLA
  BGP version 4, remote router ID 200.69.223.237
  BGP state = Established, up for 00:31:17
  Last read 00:00:17, hold time is 180, keepalive interval is 60
seconds
  Neighbor capabilities:
    Route refresh: advertised and received (old and new)
    Address family IPv6 Unicast: advertised and received
  Received 4118 messages, 0 notifications, 0 in queue
  Sent 74 messages, 3 notifications, 0 in queue
  Route refresh request: received 0, sent 0
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv6 Unicast
  NEXT_HOP is always this router
  Community attribute sent to this neighbor (both)
  260 accepted prefixes

  Connections established 3; dropped 2
Local host: 3ffe:8260:ff:93::2, Local port: 1270
Foreign host: 3ffe:8260:ff:93::1, Foreign port: 179
Nexthop: 196.3.79.204
Nexthop global: 3ffe:8260:ff:93::2
Nexthop local: ::
BGP connection: non shared network
Read thread: on  Write thread: off

# And I get a lot of prefixes advertisements on zebra daemon
zebra> sh ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng, O -
OSPFv3,
       B - BGP, * - FIB route.

C>* ::1/128 is directly connected, lo
B>* 2001:ff::/35 [20/0] via fe80::201:2ff:febf:1dc1, ptla, 00:20:04
B>* 2001:200::/35 [20/0] via fe80::201:2ff:febf:1dc1, ptla, 00:20:04
B>* 2001:208::/35 [20/0] via fe80::201:2ff:febf:1dc1, ptla, 00:20:04
B>* 2001:210::/35 [20/0] via fe80::201:2ff:febf:1dc1, ptla, 00:20:04
........ and a lot more..including 3ffe::/16
# I can't get out of my mind that my upstream peer has an address
3ffe:8260::201:2ff:febf:1dc1 <- fe80::201:2ff:febf:1dc1, humm, don't
know.

# on terminal a get this
ip -6 ro ls | more
2001:ff::/35 via fe80::201:2ff:febf:1dc1 dev ptla  metric 1024  mtu
1420 rtt 375ms
2001:200::/35 via fe80::201:2ff:febf:1dc1 dev ptla  metric 1024  mtu
1420 rtt 375ms.............. and 200 and something more
until..
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1500 rtt 375ms
fe80::/64 dev ptla  proto kernel  metric 256  mtu 1420 rtt 375ms
ff00::/8 dev eth0  proto kernel  metric 256  mtu 1500 rtt 375ms
ff00::/8 dev ptla  proto kernel  metric 256  mtu 1420 rtt 375ms
default dev eth0  proto kernel  metric 256  mtu 1500 rtt 375ms
unreachable default dev lo  metric -1  error -101

# using route
route -A inet6 | more
Kernel IPv6 routing table
Destination                                 Next Hop
    Flags Metric Ref    Use Iface
::1/128                                     ::
    U     0      0        0 lo
2001:ff::/35                                fe80::201:2ff:febf:1dc1
    UG    1024   0        0 ptla
2001:200::/35                               fe80::201:2ff:febf:1dc1
    UG    1024   0        0 ptla
2001:208::/35                               fe80::201:2ff:febf:1dc1
    UG    1024   0        0 ptla
and more

# on zebra.log i get this
2002/05/13 09:48:45 ZEBRA: rtadv: eth0 join to all-routers multicast
group
2002/05/13 09:48:45 ZEBRA: Invalid hoplimit -1 for router
advertisement ICMP packet

# now i can ping6 and traceroute6 www.6bone.net and my upstream peer
site, but no one else :(

# tcpdump on ping6 www.6bone.net
200.69.223.237 > 196.3.79.204: ip-proto-41 169 (ttl 13, id 43609)
196.3.79.204 > 200.69.223.237: ip-proto-41 60 (DF) (ttl 64, id
20814)
196.3.79.204 > 200.69.223.237: ip-proto-41 104 (DF) (ttl 64, id
20818)
200.69.223.237 > 196.3.79.204: ip-proto-41 840 (ttl 13, id 43620)

# tcpdump on ping6 on calvino.openprojects.net or another site
196.3.79.204 > 200.69.223.237: ip-proto-41 104 (DF) (ttl 64, id
23784)
196.3.79.204 > 200.69.223.237: ip-proto-41 104 (DF) (ttl 64, id
23820)
66.98.80.198 > 196.3.79.204: ip-proto-41 80 (DF) (ttl 59, id 12964)
196.3.79.204 > 66.98.80.198: ip-proto-41 80 (DF) (ttl 64, id 23833)


# Same for traceroute6
[EMAIL PROTECTED] ipv6]# traceroute6 www.6bone.net
traceroute6 to 6bone.net (3ffe:b00:c18:1::10) from
3ffe:8260:ff:93::2, 30 hops max, 16 byte packets
 1  3ffe:8260:ff:93::1 (3ffe:8260:ff:93::1)  324.399 ms  326.819 ms
320.399 ms
 2  3ffe:8260:fd:6::2 (3ffe:8260:fd:6::2)  721.016 ms  717.643 ms
719.831 ms
 3  rap.ipv6.viagenie.qc.ca (3ffe:b00:c18:1:290:27ff:fe17:fc0f)
1008.89 ms  1022.91 ms  999.159 ms
 4  www.6bone.net (3ffe:b00:c18:1::10)  1006.52 ms  1006.15 ms
1007.56 ms

# here for calvino.openprojects.net
[EMAIL PROTECTED] ipv6]# traceroute6 calvino.openprojects.net
traceroute6 to calvino.openprojects.net (3ffe:1001:210:16::25) from
3ffe:8260:ff:93::2, 30 hops max, 16 byte packets
 1  3ffe:8260:ff:93::1 (3ffe:8260:ff:93::1)  326.54 ms  307.315 ms
350.32 ms
 2  * * *


# Sorry for such a long email, i just wanted to give you the most
detailed information to get the right answer.

Does anybody knows what's goin' on ?

Thanks

   Ítaca - LinuxOrgDo
Grupo de Investigación y
Desarrollo de Tecnología de
Información http://linux.org.do
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (MingW32) - GPGOE Plug-in 0.2.2
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjzf3nsACgkQR7yOSV9ARGiCMQCg3qpRg2izIfcuNNUURFMtqdno
pYYAn0BQ8ij/y0W/Jt8rk1N4H0K/2lLy
=q+Ih
-----END PGP SIGNATURE-----




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]


Reply via email to