-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On Mon, 4 Sep 2000, Kozman Balint wrote: > 1. I would like to setup a Debian server for a 50 machines LAN, where > there are 6 jetdirect devices. As I know jetdirect works via SMB over > TCP/IP fine. Altough I couldn't find any documentation on JetDirect > neither in the Samba doc, nor in the Printer HOWTO. Do I need special > kernel support for it? Does ever Linux support JetDirect? AFAIK you can just print from lpd to a jetdirect card... you only need to know the ip-number for the jetdirect, and can then add a rlp (remote printer entry) in your /etc/printcap... Samba will then share your printers to the other machines on the lan... but you don't need samba to print to them from unix... thay are lpr compatible... > 2. I have an internal Iomega Zip100 IDE-drive. On boot-time at the > partition check I get a lost interrupt message, and bootprocess hangs up. > I use kernel v2.4.0-test7. Iomega gives support only for kernel v2.2.14 > Unfortunately funny win98 works with the same machine (and Zip100) fine. - > Thatswhy I don't think it's a hardware problem. Can't help you there... I have the internal scsi... works like a charm... Mark Janssen Unix Consultant Unix Support Nederland / PSInet Netherlands E-mail: [EMAIL PROTECTED] GnuPG Key Id: 357D2178 http: markjanssen.homeip.net www.markjanssen.nl www.maniac.nl Fax/VoiceMail: +31 20 8757555 Finger for GPG and GeekCode -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org Filter: gpg4pine 4.0 (http://azzie.robotics.net) iD8DBQE5s22Vb6urvDV9IXgRAvrnAJ4t4Qthi3QqBO7g87KijoKYLZBdxwCgto4v vLodZE5sk2w1jbyFws9QBd4= =Brsa -----END PGP SIGNATURE-----