Ok, If the modems are Rockwell based ones, you can generally use:
AT+MS=11,1 Failing that, you can try AT+MS=11 or even AT+MS=11,1,300,33600 (which is what I usually use). I have a text file here we use to slow down our customers modems with (we're an ISP). It has rockwell info, as well as info for Lucent internal and externals, US-Robotics and Cirrus Logic/Ambient chips. Cya. On Tue, Feb 13, 2001 at 06:05:08PM -0000, Chris Evans wrote: > Sorry, I don't know where else to ask this. I run a small Debian > server and handle it with dialup from a M$ W2K machine and pretty > good V90 modems. (Sorry, no choice of OS for other reasons!) > I'm running into major problems suddenly with two different modems: > dial up links to the network then tends to lock up with no good flow in > either direction. My hunch is that it's as bandwidth problem either at > the local exchange or my employer's internal wiring/switchboard but > employer's helpful person says line is fine. > > Can anyone point me to any documents that would help with the > troubleshooting of speed/reliability tradeoffs and how to set them for > (M$) V90 and downwards? I feel sure there must be some good > documents on the WWW about this. > > TIA, > > > Chris > > > Chris Evans <[EMAIL PROTECTED] or [EMAIL PROTECTED]> > Consultant Psychiatrist in Psychotherapy, > Rampton Hospital; Associate R&D Director, > Tavistock & Portman NHS Trust; > Hon. SL Institute of Psychiatry > *** My views are my own and not representative > of those institutions *** > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >