Good questions... answered individually below:
----- Original Message ----- From: "Tech Support" <[EMAIL PROTECTED]> To: <debian-isp@lists.debian.org> Sent: Monday, April 16, 2001 5:03 AM Subject: Re: Auto 10/100Mb card fallback from 100 to 10 on 100Mb network > > Please... ANY suggestions and help would be greatly appreciated. > > I'm sure you've already tried these but: > > Are you sure it is not a noisy cable problem? > - Try a different cable Tried 3 different cables. > - Try a crossover cable directly from card to card to eliminate the > possibility of a card to switch problem. Haven't tried that one. But then again... i've tried a few different network cards, so it shouldn't be that. > - You are running a *switch* and not a *hub* right? (I had to ask!) Yes yes... switch ;-) > - Did you look at the 8139too.txt in the 2.4.x Documentation? Not running 2.4.x... running the old n trusty 2.2.17 kernel > I'm running SMC cards with the 8139 chip in 100Mbs mode on 2.4.2, > 2.4.3 and 2.2.18 without trouble. I compiled the driver into the kernel > instead of as a module but that shouldn't matter. Yeap... i also compiled the code into the kernel, not as a module. > I'm sure that this was of no help! :-) Well, its all a process of elimination, isn't it :-) Unfortunately, problem has still not been solved :-/ > http://www.elbnet.com > ELB Internet Service, Inc. > Web Design, Computer Consulting, Internet Hosting > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >