Am 2004-04-05 14:46:06, schrieb Andrew Miehs: >Hi Michelle, > >You should be able to use the G.703 interface on the 3Com NETBuilder, >but you need to find out if it supports the signaling that Morocan Telecom >provide....
Yes, I know, and it works with the Maroc Telecom, but the main problem is, that teh "HSS G.703" modul has only one port. >The other modules, like Kentrox usually have X.21 on the rear, so you >would need to have a router with an X.21 Interface... >Does the 3Com stuff really work? Yes, the "HSS 4-port WAN" module has FLEXWAN adapter cable for RS-232, RS-449, V.35, X.21 and EIA-530 So I can choose the FLEXWAN-X.21 Cable if I get them ! >A Kentrox DataSMART 456 should do the trick if you need x.21 on the other >end... I was on the website, but they are realy expensive ! >The DigitalLink (now quickeagle) also work ok. > >http://www.quickeagle.com/solutions/soloe1dsu.asp This will I check out now... >As for using the G.703 card on the 3Com... You are very reliant on 3com to >provide you with BUG free software, that it doesnt keep dropping the line. >(Bad experience with intergrated cards from Cisco.) I do not know, because it is my first experience with WAN's of this dimension. The OC-3 in Paris/France is managed by <http://www.amen.fr/> and the two E3 in Kehl/Germany by UUnet, so I have no stress with it. But now it is quiet different... Fortunately I have gotten most for free... (val. around 300.000 Euro) Question: If I have curently no E1, can I connect the two DSU-Modem to each other for testing ? Or do I need the ISP's E1 between ? My "NETBuilder II" is up and running and the "NETBuilder Office Connect 221 Boundary Router" to. So I need to test it... The 3Com Service does not respond to my questions :-/ >Andrew Greetings Michelle -- Registered Linux-User #280138 with the Linux Counter, http://counter.li.org/