Sul mio portatile non riesco a leggere la chiave USB che funziona pero' con un computer desktop. Sulle entrambe le macchine è installata la Debian 3.1 con kernel 2.4.18-bf2.4 Sul portatile dmesg fornisce: debian:~# dmesg Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f740000 (usable) BIOS-e820: 000000000f740000 - 000000000f750000 (ACPI data) BIOS-e820: 000000000f750000 - 000000000f800000 (ACPI NVS) On node 0 totalpages: 63296 zone(0): 4096 pages. zone(1): 59200 pages. zone(2): 0 pages. Found and enabled local APIC! Kernel command line: noinitrd root=/dev/hda7 hdc=ide-scsi max_scsi_luns=1 BOOT_IMAGE=/install ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1400.074 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2791.83 BogoMIPS Memory: 245884k/253184k available (1783k kernel code, 6912k reserved, 549k data, 280k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: a7e9fbbf 00000000 00000000, vendor = 0 CPU: L2 cache: 8192K CPU: L3 cache: 5632K CPU: After vendor init, caps: a7e9fbbf 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1400.0774 MHz. ..... host bus clock speed is 100.0054 MHz. cpu: 0, clocks: 1000054, slice: 500027 CPU0<T0:1000048,T1:500016,D:5,S:500027,C:1000054> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [8086/24cc] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using pci=biosirq. Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24ca PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: chipset revision 3 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63 ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001) 8139cp: pci dev 01:04.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.24 eth0: RealTek RTL8139 Fast Ethernet at 0xd001ac00, 00:0c:6e:e4:f2:52, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ c13e7dc0 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed Adding Swap: 530104k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xd480, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd880, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbscanner scanner.c: 0.4.6:USB Scanner Driver usb.c: registered new driver audio audio.c: v1.0.0:USB Audio Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver Intel 810 + AC97 Audio, version 0.21, 10:28:09 Apr 14 2002 ohci1394: $Revision: 1.80 $ Ben Collins <[EMAIL PROTECTED]> ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff7ef000-ff7ef800] Max Packet=[2048] eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.irda_init() IrDA: Registered device irda0 Linux PCMCIA Card Services 3.1.33 kernel build: 2.4.18-bf2.4 unknown options: [pci] [cardbus] [apm] Intel ISA/PCI/CardBus PCIC probe: PCI: No IRQ known for interrupt pin A of device 01:03.0. Please try using pci=biosirq. PCI: No IRQ known for interrupt pin B of device 01:03.1. Please try using pci=biosirq. Ricoh RL5C476 rev a9 PCI-to-CardBus at slot 01:03, mem 0xff700000 host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 32/176] [bus 2/5] host opts [1]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 6/9] ISA irqs (default) = 7,9,10,11,12 polling interval = 1000 ms irtty_net_open() irlap_change_speed(), setting speed to 9600 lsmod: debian:~# lsmod Module Size Used by Not tainted ds 6624 2 i82365 22384 2 pcmcia_core 41376 0 [ds i82365] irtty 7424 2 (autoclean) irda 138764 1 (autoclean) [irtty] ohci1394 14912 0 (unused) usbkbd 2848 0 (unused) hid 18784 0 (unused) evdev 4544 0 (unused) cpuid 1184 0 (unused) apm 9116 2 usb-storage 97120 0 (unused) audio 38432 0 (unused) soundcore 3204 0 [audio] scanner 8480 0 (unused) sg 24420 0 (unused) ide-scsi 7456 0 ieee1394 23496 0 [ohci1394] keybdev 1664 0 (unused) input 3040 0 [usbkbd hid evdev keybdev] usb-uhci 20676 0 (unused) usbcore 48000 1 [usbkbd hid usb-storage audio scanner usb-uhci] mount: debian:~# mount -t vfat /dev/sda1 /mnt/usbst mount: /dev/sda1 is not a valid block device Il portatile e' un Asus M2N con tecnologia Centrino La chiave e' SanDisk Cruzer mini 256M Chiedo: e' usb-storage che non fa il suo lavoro all'avvio oppure sto commettendo degli errori di configurazione o cos'altro? Ho consultato diverse liste e siti Internet ma questo caso specifico non sono riuscito a trovarlo. Del resto sono un newbie. Grazie in anticipo per l'aiuto. Saluti.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]