Ho acquistato un disco ethernet lacie, purtroppo pur ospitando un sistema
Linux non fornisce un accesso NFS, a questo punto volevo tentare di
installarci Debian, prima di addentrarmi volevo sapere se c'era qualcheduno
che può confortarmi con qualche storia di successo :-|

al momento ho solo installato un exploit per poter eseguire comandi via web
con cui ho potuto estrarre le info che riporto di seguito, qualsiasi
suggerimento
a riguardo è accetto specialmente per architettura arm ,-)

ciao,
Alessandro

Linux version 2.6.12.6-arm1-lacie5a ([EMAIL PROTECTED]) (gcc version 3.4.4 
(release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET 2006

Processor       : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS        : 266.24
Features        : swp half thumb fastmult 
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 0
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 1
I line length   : 32
I sets          : 1024
D size          : 32768
D assoc         : 1
D line length   : 32
D sets          : 1024

Hardware        : MV-88fxx81
Revision        : 0000
Serial          : 0000000000000000

              total         used         free       shared      buffers
  Mem:        61632        60568         1064            0          232
 Swap:       128448            0       128448
Total:       190080        60568       129512

Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda2            487248896 115765268 371483628  24% /home
/dev/sda9               719420     86324    596552  13% /oldroot/snapshots

# Swap partition entry
/dev/sda5       swap    swap    defaults        0 0

# Mount the ROOT filesystem from the hard drive
/dev/sda7       /       ext3    defaults,ro     1 1     

# Mount the virtual proc filesystem
none    /proc   proc    defaults        0 0

#UserData
/dev/sda2       /home   xfs     defaults,rw     1 2




-- 
Per REVOCARE l'iscrizione alla lista, inviare un email a 
[EMAIL PROTECTED] con oggetto "unsubscribe". Per
problemi inviare un email in INGLESE a [EMAIL PROTECTED]

To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Rispondere a