Un "preoccupato" saluto a tutta la lista :-) Il giorno ven, 04/09/2009 alle 19.41 +0200, roberto ha scritto: [...] > facciamo che lo mando a te personalmente perche' non vorrei ingolfare > il thread; magari se trovi parti rilevanti copiamo solo quelle qui
Beh! Grazie per la grande fiducia ma due occhi, sono _due occhi_ :-) [...] > si', eccola qui, la parte che riguarda eth0 c'e' regolarmente > > # This file was automatically generated by the /lib/udev/write_net_rules > # program, probably run by the persistent-net-generator.rules rules file. > # > # You can modify it, as long as you keep each rule on a single line. > # MAC addresses must be written in lowercase. > > SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:11:43:44:11:da", > NAME="eth0" > > # PCI device 0x8086:0x4220 (ipw2200) > SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:0e:35:af:7a:3c", > NAME="eth1" Ok! :-) [...] > nessuna traccia di irqpoll ... Si! si, ho visto :-( Ho visto pure, pero', che il sistema da qualche errore per esempio: [ 10.000591] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 10.000700] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 10.054891] Error: Driver 'pcspkr' is already registered, aborting... [ 10.084618] ieee80211_crypt: registered algorithm 'NULL' [ 10.089893] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 10.089934] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com> [ 10.117759] Error: Driver 'pcspkr' is already registered, aborting... Io incollo qui sotto il tuo "dmesg" cosi sentiamo altri pareri di persone autorevoli qui in lista :-) Da parte mia penso ancora che l'assegnazione degli "irq" dia alito a "gomitate" (passatemi il termine :) per il funzionamento corretto dei device. E' vero il kernel non da segnali negativi ma ci sono alcuni "irq" un po' affollati e pure l'errore che ti ho riportato sopra. _Per prova_ ti consiglierei di aprire un terminale root e aggiungere al file /boot/grub/menu.list l'opzione che ti stavo dicendo nella lettera anteriore "irqpoll", tanto non fa disastri :-) Dove? questo e' un'estratto del mio: [...] title Debian GNU/Linux, kernel 2.6.26-2-686 root (hd0,2) kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sda3 ro irqpoll initrd /boot/initrd.img-2.6.26-2-686 [...] Buona fortuna Ciao Genki ):o)) Ehi! non scappate qui sotto c'e' qualcosa da leggere ;-) -------------------------------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny1) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jul 26 21:25:33 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffae000 (usable) [ 0.000000] BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262062) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262062 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262062 [ 0.000000] On node 0 totalpages: 262062 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 256 pages used for memmap [ 0.000000] HighMem zone: 32430 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FDF00, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 DELL CPi R 27D5061D ASL 61) [ 0.000000] ACPI: FACP 3FFF0400, 0074 (r1 DELL CPi R 27D5061D ASL 61) [ 0.000000] ACPI: DSDT 3FFF0C00, 2E1A (r1 INT430 SYSFexxx 1001 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFFF800, 0040 [ 0.000000] ACPI: ASF! 3FFF0800, 005B (r16 DELL CPi R 27D5061D ASL 61) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260014 [ 0.000000] Kernel command line: root=/dev/hda4 ro [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1993.596 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1029220k/1048248k available (1769k kernel code, 18352k reserved, 751k data, 244k init, 130744k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba66b - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba66b (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084023] Calibrating delay using timer specific routine.. 3990.24 BogoMIPS (lpj=7980494) [ 0.084124] Security Framework initialized [ 0.084163] SELinux: Disabled at boot. [ 0.084198] Capability LSM initialized [ 0.084244] Mount-cache hash table entries: 512 [ 0.084411] Initializing cgroup subsys ns [ 0.084448] Initializing cgroup subsys cpuacct [ 0.084483] Initializing cgroup subsys devices [ 0.084534] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084591] CPU: L2 cache: 2048K [ 0.084626] Intel machine check architecture supported. [ 0.084663] Intel machine check reporting enabled on CPU#0. [ 0.084709] Checking 'hlt' instruction... OK. [ 0.100334] SMP alternatives: switching to UP code [ 0.104957] Freeing SMP alternatives: 16k freed [ 0.104993] ACPI: Core revision 20080321 [ 0.110646] ACPI: setting ELCR to 0200 (from 0800) [ 0.113095] weird, boot CPU (#0) not listedby the BIOS. [ 0.113130] SMP motherboard not detected. [ 0.113165] Local APIC not detected. Using dummy APIC emulation. [ 0.113200] SMP disabled [ 0.113275] Brought up 1 CPUs [ 0.113308] Total of 1 processors activated (3990.24 BogoMIPS). [ 0.113349] CPU0 attaching sched-domain: [ 0.113351] domain 0: span 0 [ 0.113354] groups: 0 [ 0.113542] net_namespace: 660 bytes [ 0.113586] Booting paravirtualized kernel on bare hardware [ 0.113815] NET: Registered protocol family 16 [ 0.114036] ACPI: bus type pci registered [ 0.147853] PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2 [ 0.147890] PCI: Using configuration type 1 for base access [ 0.147946] Setting up standard PCI resources [ 0.149405] ACPI: EC: Look up EC in DSDT [ 0.158369] ACPI: Interpreter enabled [ 0.158406] ACPI: (supports S0 S1 S3 S4 S5) [ 0.158553] ACPI: Using PIC for interrupt routing [ 0.175465] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.175879] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.175927] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.176425] PCI: Transparent bridge - 0000:00:1e.0 [ 0.176503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.176788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.176861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.190148] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.190393] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 0.190636] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.190876] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.191143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.191600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.192076] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.192136] pnp: PnP ACPI init [ 0.192173] ACPI: bus type pnp registered [ 0.219229] pnp: PnP ACPI: found 13 devices [ 0.219264] ACPI: ACPI bus type pnp unregistered [ 0.219301] PnPBIOS: Disabled by ACPI PNP [ 0.219541] PCI: Using ACPI for IRQ routing [ 0.219738] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.219776] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.219814] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.219852] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.219889] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.219935] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.219982] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved [ 0.220034] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.220084] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.220121] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.220158] system 00:02: ioport range 0x808-0x80f has been reserved [ 0.220198] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.220235] system 00:03: ioport range 0x806-0x807 has been reserved [ 0.220272] system 00:03: ioport range 0x810-0x85f has been reserved [ 0.220309] system 00:03: ioport range 0x860-0x87f has been reserved [ 0.220346] system 00:03: ioport range 0x880-0x8bf has been reserved [ 0.220382] system 00:03: ioport range 0x8c0-0x8df has been reserved [ 0.220419] system 00:03: ioport range 0x8e0-0x8ff has been reserved [ 0.220461] system 00:08: ioport range 0x900-0x97f has been reserved [ 0.250812] PCI: region 0000:02:01.0/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.250859] PCI: region 0000:02:01.1/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.250911] PCI: Bridge: 0000:00:01.0 [ 0.250945] IO window: c000-cfff [ 0.250980] MEM window: 0xfc000000-0xfdffffff [ 0.251015] PREFETCH window: 0x00000000e8000000-0x00000000efffffff [ 0.251060] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 0.251095] IO window: 0x0000d000-0x0000d0ff [ 0.251131] IO window: 0x0000d400-0x0000d4ff [ 0.251167] MEM window: 0x54000000-0x57ffffff [ 0.251203] PCI: Bus 7, cardbus bridge: 0000:02:01.1 [ 0.251238] IO window: 0x0000d800-0x0000d8ff [ 0.251274] IO window: 0x0000dc00-0x0000dcff [ 0.251310] MEM window: 0x58000000-0x5bffffff [ 0.251346] PCI: Bridge: 0000:00:1e.0 [ 0.251380] IO window: d000-efff [ 0.251416] MEM window: 0xf6000000-0xfbffffff [ 0.251452] PREFETCH window: disabled. [ 0.251498] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.251511] pci 0000:02:01.0: enabling device (0000 -> 0003) [ 0.251695] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.251731] PCI: setting IRQ 11 as level-triggered [ 0.251735] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.251836] pci 0000:02:01.1: enabling device (0000 -> 0003) [ 0.251873] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.251997] NET: Registered protocol family 2 [ 0.252110] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.252395] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.253783] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.254803] TCP: Hash tables configured (established 131072 bind 65536) [ 0.254844] TCP reno registered [ 0.255048] NET: Registered protocol family 1 [ 0.255225] checking if image is initramfs... it is [ 0.752057] Switched to high resolution mode on CPU 0 [ 0.757615] Freeing initrd memory: 6050k freed [ 0.758324] audit: initializing netlink socket (disabled) [ 0.758386] type=2000 audit(1252090853.756:1): initialized [ 0.758597] highmem bounce pool size: 64 pages [ 0.758638] Total HugeTLB memory allocated, 0 [ 0.758767] VFS: Disk quotas dquot_6.5.1 [ 0.758832] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.758914] msgmni has been set to 1767 [ 0.759078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.759125] io scheduler noop registered [ 0.759159] io scheduler anticipatory registered [ 0.759193] io scheduler deadline registered [ 0.759240] io scheduler cfq registered (default) [ 0.760127] pci 0000:01:00.0: Boot video device [ 0.760468] isapnp: Scanning for PnP cards... [ 1.113356] isapnp: No Plug & Play device found [ 1.115657] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.115815] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.116262] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.116642] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 1.116679] PCI: setting IRQ 5 as level-triggered [ 1.116683] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 1.116776] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 1.118023] brd: module loaded [ 1.118145] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.123245] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.123284] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.123434] mice: PS/2 mouse device common for all mice [ 1.123578] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.123627] rtc0: alarms up to one day [ 1.123687] cpuidle: using governor ladder [ 1.123721] cpuidle: using governor menu [ 1.123758] No iBFT detected. [ 1.124453] TCP cubic registered [ 1.124489] NET: Registered protocol family 17 [ 1.124528] Using IPI No-Shortcut mode [ 1.124662] registered taskstats version 1 [ 1.124829] rtc_cmos 00:06: setting system clock to 2009-09-04 19:00:54 UTC (1252090854) [ 1.125066] Freeing unused kernel memory: 244k freed [ 1.128811] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.202145] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 1.202332] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.202369] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.204825] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.206083] ACPI: Thermal Zone [THM] (62 C) [ 1.596401] ACPI: ACPI Dock Station Driver [ 1.643843] usbcore: registered new interface driver usbfs [ 1.643912] usbcore: registered new interface driver hub [ 1.643973] usbcore: registered new device driver usb [ 1.645053] USB Universal Host Controller Interface driver v3.0 [ 1.645347] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.645385] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.645483] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.645487] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.645677] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.645744] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 1.645865] usb usb1: configuration #1 chosen from 1 choice [ 1.645922] hub 1-0:1.0: USB hub found [ 1.645960] hub 1-0:1.0: 2 ports detected [ 1.718271] Uniform Multi-Platform E-IDE driver [ 1.718317] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.748139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.748183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.748228] usb usb1: Product: UHCI Host Controller [ 1.748263] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 1.748299] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.748410] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.748509] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.748513] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.748572] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 1.748638] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 [ 1.748745] usb usb2: configuration #1 chosen from 1 choice [ 1.748804] hub 2-0:1.0: USB hub found [ 1.748843] hub 2-0:1.0: 2 ports detected [ 1.852121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.852165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.852210] usb usb2: Product: UHCI Host Controller [ 1.852245] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 1.852281] usb usb2: SerialNumber: 0000:00:1d.1 [ 1.852571] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.852609] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.852705] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.852709] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.852765] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1.852832] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 [ 1.852937] usb usb3: configuration #1 chosen from 1 choice [ 1.852994] hub 3-0:1.0: USB hub found [ 1.853032] hub 3-0:1.0: 2 ports detected [ 1.856009] Marking TSC unstable due to: TSC halts in idle. [ 1.958257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.958295] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.958341] usb usb3: Product: UHCI Host Controller [ 1.958375] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 1.958411] usb usb3: SerialNumber: 0000:00:1d.2 [ 1.958673] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 1.958709] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 1.958810] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.958813] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.958866] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 1.962802] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.962840] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.962845] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 [ 1.990107] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 2.001930] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.002019] usb usb4: configuration #1 chosen from 1 choice [ 2.002075] hub 4-0:1.0: USB hub found [ 2.002112] hub 4-0:1.0: 6 ports detected [ 2.057794] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.105718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.105756] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.105801] usb usb4: Product: EHCI Host Controller [ 2.105836] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 2.105872] usb usb4: SerialNumber: 0000:00:1d.7 [ 2.108014] tg3.c:v3.92.1 (June 9, 2008) [ 2.108014] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 2.152871] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:43:44:11:da [ 2.152927] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 2.152973] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 2.153030] ICH4: IDE controller (0x8086:0x24ca rev 0x01) at PCI slot 0000:00:1f.1 [ 2.153080] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.153121] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.153217] ICH4: not 100% native mode: will probe irqs later [ 2.153263] ide0: BM-DMA at 0xbfa0-0xbfa7 [ 2.153302] ide1: BM-DMA at 0xbfa8-0xbfaf [ 2.153338] Probing IDE interface ide0... [ 2.440193] hda: HTS548080M9AT00, ATA DISK drive [ 2.888034] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 3.109150] usb 1-2: configuration #1 chosen from 1 choice [ 3.112053] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.112281] hda: UDMA/100 mode selected [ 3.112534] Probing IDE interface ide1... [ 3.121680] usb 1-2: New USB device found, idVendor=413c, idProduct=8000 [ 3.121717] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.360033] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.535074] usb 2-1: configuration #1 chosen from 1 choice [ 3.538502] usb 2-1: New USB device found, idVendor=046d, idProduct=c016 [ 3.538540] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.538578] usb 2-1: Product: Optical USB Mouse [ 3.538612] usb 2-1: Manufacturer: Logitech [ 3.559124] usbcore: registered new interface driver hiddev [ 3.571768] input: Logitech Optical USB Mouse as /class/input/input1 [ 3.571939] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 [ 3.572112] usbcore: registered new interface driver usbhid [ 3.572148] usbhid: v2.6:USB HID core driver [ 3.848194] hdc: HL-DT-ST DVD+/-RW GSA-T21N, ATAPI CD/DVD-ROM drive [ 4.184074] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.184859] hdc: UDMA/33 mode selected [ 4.185294] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.203398] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.215879] SCSI subsystem initialized [ 4.224559] libata version 3.00 loaded. [ 4.246790] hda: max request size: 512KiB [ 4.247493] hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63 [ 4.251547] hda: cache flushes supported [ 4.251621] hda: hda1 hda2 hda3 hda4 [ 4.284441] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 4.284441] Uniform CD-ROM driver Revision: 3.20 [ 4.776492] PM: Starting manual resume from disk [ 4.829476] kjournald starting. Commit interval 5 seconds [ 4.829523] EXT3-fs: mounted filesystem with ordered data mode. [ 7.184399] udevd version 125 started [ 7.637854] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.993739] Linux agpgart interface v0.103 [ 8.057909] agpgart: Detected an Intel 855PM Chipset. [ 8.065052] agpgart: AGP aperture is 128M @ 0xe0000000 [ 8.111388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.113821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.473981] ACPI: AC Adapter [AC] (on-line) [ 8.807913] ACPI: Battery Slot [BAT0] (battery present) [ 8.808086] ACPI: Battery Slot [BAT1] (battery absent) [ 8.808233] input: Lid Switch as /class/input/input2 [ 8.820536] ACPI: Lid Switch [LID] [ 8.820631] input: Power Button (CM) as /class/input/input3 [ 8.844070] ACPI: Power Button (CM) [PBTN] [ 8.844240] input: Sleep Button (CM) as /class/input/input4 [ 8.876068] ACPI: Sleep Button (CM) [SBTN] [ 9.197422] input: Video Bus as /class/input/input5 [ 9.224074] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.479506] Bluetooth: Core ver 2.11 [ 9.479649] NET: Registered protocol family 31 [ 9.479684] Bluetooth: HCI device and connection manager initialized [ 9.479720] Bluetooth: HCI socket layer initialized [ 9.502705] Bluetooth: HCI USB driver ver 2.9 [ 9.507656] usbcore: registered new interface driver hci_usb [ 9.613482] intel_rng: FWH not detected [ 9.836820] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 9.836933] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860) [ 9.836995] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.897238] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 9.897347] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 9.960855] input: PC Speaker as /class/input/input6 [ 10.000076] MC'97 1 converters and GPIO not ready (0xff00) [ 10.000591] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 10.000700] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 10.054891] Error: Driver 'pcspkr' is already registered, aborting... [ 10.084618] ieee80211_crypt: registered algorithm 'NULL' [ 10.089893] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 10.089934] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com> [ 10.117759] Error: Driver 'pcspkr' is already registered, aborting... [ 10.155539] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 10.155591] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 10.531268] input: DualPoint Stick as /class/input/input7 [ 10.575911] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input8 [ 10.601805] parport_pc 00:0c: reported by Plug and Play ACPI [ 10.601893] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 10.613295] Error: Driver 'pcspkr' is already registered, aborting... [ 10.828042] intel8x0_measure_ac97_clock: measured 55460 usecs [ 10.828085] intel8x0: clocking to 48000 [ 10.829088] Yenta: CardBus bridge found at 0000:02:01.0 [1028:011d] [ 10.829143] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 10.829178] IO window: 0x0000d000-0x0000d0ff [ 10.829214] IO window: 0x0000d400-0x0000d4ff [ 10.829250] PREFETCH window: 0xf6400000-0xf67fffff [ 10.829287] MEM window: 0x54000000-0x57ffffff [ 10.829326] Yenta O2: res at 0x94/0xD4: 00/ea [ 10.829360] Yenta O2: enabling read prefetch/write burst [ 10.956597] Yenta: ISA IRQ mask 0x0418, PCI irq 11 [ 10.956640] Socket status: 30000006 [ 10.956687] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 10.956737] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff [ 10.956774] cs: IO port probe 0xd000-0xefff: clean. [ 10.957231] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff [ 10.957859] Yenta: CardBus bridge found at 0000:02:01.1 [1028:011d] [ 10.957911] PCI: Bus 7, cardbus bridge: 0000:02:01.1 [ 10.957946] IO window: 0x0000d800-0x0000d8ff [ 10.957982] IO window: 0x0000dc00-0x0000dcff [ 10.958018] PREFETCH window: 0xf6800000-0xf6bfffff [ 10.958055] MEM window: 0x58000000-0x5bffffff [ 11.084619] Yenta: ISA IRQ mask 0x0418, PCI irq 11 [ 11.084662] Socket status: 30000410 [ 11.084696] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 11.084746] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff [ 11.084783] cs: IO port probe 0xd000-0xefff: clean. [ 11.085240] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff [ 11.085830] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 11.104071] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 11.104154] firmware: requesting ipw2200-bss.fw [ 11.318344] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 11.820031] pccard: PCMCIA card inserted into slot 1 [ 11.820080] cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xf71fffff 0xf7e00000-0xf83fffff 0xf9c00000-0xfa1fffff 0xfae00000-0xfb3fffff [ 11.832306] pcmcia: registering new device pcmcia1.0 [ 11.959096] cs: IO port probe 0x100-0x4ff: clean. [ 11.960648] cs: IO port probe 0x800-0x8ff: clean. [ 11.960731] cs: IO port probe 0xc00-0xcff: clean. [ 11.961207] cs: IO port probe 0xa00-0xaff: clean. [ 11.961986] cs: IO port probe 0x100-0x4ff: clean. [ 11.963396] cs: IO port probe 0x800-0x8ff: clean. [ 11.963478] cs: IO port probe 0xc00-0xcff: clean. [ 11.963956] cs: IO port probe 0xa00-0xaff: clean. [ 12.800179] Adding 1951888k swap on /dev/hda3. Priority:-1 extents:1 across:1951888k [ 13.098001] EXT3 FS on hda4, internal journal [ 13.409158] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 13.409158] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 13.409158] ide_generic: I/O resource 0x170-0x177 not free. [ 13.513503] device-mapper: uevent: version 1.0.3 [ 13.514670] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 13.712962] fuse init (API version 7.9) [ 14.331601] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. [ 14.331601] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. [ 14.331601] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. [ 19.344255] NET: Registered protocol family 10 [ 19.344727] lo: Disabled Privacy Extensions [ 24.998601] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.246108] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 32.088635] [drm] Initialized drm 1.1.0 20060810 [ 32.093340] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 32.093946] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 34.385937] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 34.385937] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 34.385937] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 35.744043] [drm] Setting GART location based on new memory map [ 35.744056] [drm] Loading R200 Microcode [ 35.744110] [drm] writeback test succeeded in 2 usecs [ 240.192873] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 240.595132] ieee80211_crypt: registered algorithm 'TKIP' [ 250.260015] eth1: no IPv6 routers present [ 290.652875] ADDRCONF(NETDEV_UP): eth1: link is not ready -- roberto -- Per REVOCARE l'iscrizione alla lista, inviare un email a debian-italian-requ...@lists.debian.org con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a listmas...@lists.debian.org To UNSUBSCRIBE, email to debian-italian-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org