Il 28/09/2011 22:51, NN_il_Confusionario ha scritto: > On Wed, Sep 28, 2011 at 04:33:37PM +0200, pinguino wrote: >> Ma c'e' un problema. All'avvio carica bene il bootloader lilo 22.8, poi >> inizia a fare l'avvio del sistema operativo , mostrando una serie di >> messaggi a video, ma poi si blocca, e non completa l'avvio come prima, >> rimane il prompt , ma non quello delle console normale di linux. >> Non so che messaggio di errore dia di preciso. > > (1) manda in lista il contenuto di /etc/lilo.conf
# Automatically added by lilo postinst script large-memory # /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --------------- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'. # +---------------------------------------------------------------+ # | !! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt' (if you have created it), or | # | install a new kernel. The computer will most likely fail to | # | boot if a kernel-image post-install script or you don't | # | remember to run `lilo'. | # | | # +---------------------------------------------------------------+ # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/sdb # Specifies the device that should be mounted as root. (`/') # root=/dev/sdb1 # This option may be needed for some software RAID installs. # # raid-extra-boot=mbr-only # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Installs the specified file as the new boot sector # You have the choice between: text, bmp, and menu # Look in lilo.conf(5) manpage for details # #install=menu # Specifies the location of the map file # map=/boot/map # You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000 # Specifies the number of deciseconds (0.1 seconds) LILO should # wait before booting the first image. # delay=20 # You can put a customized boot message up if you like. If you use # `prompt', and this computer may need to reboot unattended, you # must specify a `timeout', or it will sit there forever waiting # for a keypress. `single-key' goes with the `alias' lines in the # `image' configurations below. eg: You can press `1' to boot # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. # # message=/boot/bootmess.txt # prompt # delay=100 # timeout=100 # Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>) # # vga=ask # vga=9 # # Kernel command line options that apply to all installed images go # here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in # the Linux kernel `Documentation' directory. # # append="" # If you used a serial console to install Debian, this option should be # enabled by default. # serial= # # Boot up Linux by default. # default=Linux image=/vmlinuz label=Linux read-only # restricted # alias=1 initrd=/initrd.img image=/vmlinuz.old label=LinuxOLD read-only optional # restricted # alias=2 initrd=/initrd.img.old # If you have another OS on this machine to boot, you can uncomment the # following lines, changing the device name on the `other' line to # where your other OS' partition is. # # other=/dev/hda4 # label=HURD # restricted # alias=3 > > (2) quando vedi messaggi di errore segnateli cosi` da poterli mandare in > lista. Sfortunatamente la descrizione che dai di cio` che succede e` > insufficiente a capire cosa succede esattamente (dove si blocca, cosa > cerca sull'altro HD, ...). Appena li vedo me li segno. C'e' qualche file di log, che viene registrato sull'hd, che posso inviare ? Credo che un problema sia che in lilo.conf, va a cercare di fare il boot da sdb , che non c'e'. Perche' dopo avere scollegato il secondo hd c'e' soltanto sda. Ciao Claudio -- Per REVOCARE l'iscrizione alla lista, inviare un email a debian-italian-requ...@lists.debian.org con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a listmas...@lists.debian.org To UNSUBSCRIBE, email to debian-italian-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4e8435a5.9030...@fastwebnet.it