Il 31/05/21 12:24, Piviul ha scritto:
> Il 31/05/21 10:18, pinguino ha scritto:
>> Buongiorno Lista,
>>
>> Questo è il risultato:
>> ethtool enp1s0
>> Settings for enp1s0:
>>     Supported ports: [ TP ]
>>     Supported link modes:   10baseT/Half 10baseT/Full
>>                             100baseT/Half 100baseT/Full
>>                             1000baseT/Full
>>     Supported pause frame use: Symmetric Receive-only
>>     Supports auto-negotiation: Yes
>>     Supported FEC modes: Not reported
>>     Advertised link modes:  10baseT/Half 10baseT/Full
>>                             100baseT/Half 100baseT/Full
>>                             1000baseT/Full
>>     Advertised pause frame use: Symmetric
>>     Advertised auto-negotiation: Yes
>>     Advertised FEC modes: Not reported
>>     Speed: Unknown!
>>     Duplex: Unknown! (255)
>>     Port: Twisted Pair
>>     PHYAD: 0
>>     Transceiver: internal
>>     Auto-negotiation: on
>>     MDI-X: Unknown
>>     Current message level: 0x000060e4 (24804)
>>                    link ifup rx_err tx_err hw wol
>>     Link detected: no
>>
>> In teoria mi sembra di capire che può supportare sia 10MB, 100Mb ed
>> anche i 1000Mb.
> 
> Sembra che il cavo sia scollegato. Per il resto mi sembra funzioni.
> 
> Piviul
> 

Buongiorno Lista,

Pardon avevo il cavo di rete collegato sull'altra scheda D_link.
Ora vede la velocità.
ethtool enp1s0 | grep -i speed
        Speed: 100Mb/s
Da 100Mb/s.

ethtool enp1s0
Settings for enp1s0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Current message level: 0x000060e4 (24804)
                               link ifup rx_err tx_err hw wol
        Link detected: yes


Ho visto però che ci sono due led uno da luce gialla lampeggiante e
l'altro ha una luce rossa accesa fissa.

Sulla scheda D_link invece c'è la luce verde lampeggiante ed una verde
fissa.

Grazie
Saluti.



Reply via email to