Chiedo scusa... trattandosi di un cdrom i device sono /dev/scd0 /dev/scd1 etc..
> I device SCSI non si chiamano hdX ma sdX, quindi devi montare /dev/sdb Il gio, 2002-03-07 alle 19:05, Leonardo Canducci ha scritto: > sono un newbie che cerca di masterizzare in linux. ho un liteon 24x > (gran mast e costa zero) ide, naturalmente. > ho installato mkisofs, cdrecord e il frontend gcombust. > poi è venuto il problema dell'emulazione scsi (è l'unico sistema per > usare i mast ide a quanto ho visto). > ho caricato il modulo ide-scsi con modconf e aggiunto in lilo > append="hdb=ide-scsi" > già che c'ero l'ho fatto anche per il DVD (hdc(. > al riavvio le due unità sono riconosciute come scsi: > da dmesg: > > VP_IDE: IDE controller on PCI bus 00 dev 39 > VP_IDE: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > hda: IBM-DTLA-307030, ATA DISK drive > hdb: LITE-ON LTR-24102B, ATAPI CDROM drive > hdc: _NEC DV-5700B, ATAPI CDROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: IBM-DTLA-307030, 29314MB w/1916kB Cache, CHS=3737/255/63 > > più avanti: > > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > scsi : 1 host. > Vendor: LITE-ON Model: LTR-24102B Rev: 5S54 > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > Vendor: _NEC Model: DV-5700B Rev: 1.91 > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 > sr0: scsi3-mmc drive: 92x/40x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.11 > sr1: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray > > Il problema è, ancora prima di masterizzare, che non mi funzionano più i > montadischi(applet) e non riesco a montare i cd con > mount -o ro -t iso9660 /dev/hdb > > insomma non riesco a usare il cd! > ho provato cambiando fstab ma niente. > > sicuramente è una cretinata... cosa devo fare per montare i cd? è > cambiato qualcosa ora che sono in emulazione scsi? > devo montare il dev sr0? > > aiuto!!! > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >