On Mon, Jul 29, 2002 at 01:15:17PM +0200, InSa wrote: > Salve a tutti, > > ho comprato un controller "ACARD Ultra ATA-133 AEC-6280 PCI-to-IDE Ultra > ATA-133", e vorrei utilizzarlo anche col pinguino. Ho scaricato i driver > dall'indirizzo " > http://161.58.88.33/download/linux/driver/ide/aec6280_ver10.tar " , > scompattati ed ho capito che devo inserirli in > /usr/src/linux/drivers/ide , abilitare le opzioni relative al controller > e ricompilare il kernel. Ora ho fatto tutto questo, ma quando eseguo " > make dep && make clean && make bzImage && make modules && make > modules_install " ottengo questo errore: > > make[2]: Entering directory `/usr/src/linux/drivers/ide' > make all_targets > make[3]: Entering directory `/usr/src/linux/drivers/ide' > gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes > -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common > -pipe -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4 > -DEXPORT_SYMTAB -c ide.c gcc -D__KERNEL__ -I/usr/src/linux/include -Wall > -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer > -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 > -march=i686 -malign-functions=4 -DEXPORT_SYMTAB -c ide-features.c > gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes > -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common > -pipe -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4 > -c -o aec62xx.o aec62xx.c aec62xx.c: In function `aec62xx_get_info': > aec62xx.c:72: `PCI_DEVICE_ID_ARTOP_ATP865' undeclared (first use in this > function) aec62xx.c:72: (Each undeclared identifier is reported only > once aec62xx.c:72: for each function it appears in.) > make[3]: *** [aec62xx.o] Error 1 > make[3]: Leaving directory `/usr/src/linux/drivers/ide' > make[2]: *** [first_rule] Error 2 > make[2]: Leaving directory `/usr/src/linux/drivers/ide' > make[1]: *** [_subdir_ide] Error 2 > make[1]: Leaving directory `/usr/src/linux/drivers' > make: *** [_dir_drivers] Error 2 > > e si pianta. > Suggerimenti?!? > > Utilizzo debian 3.0 con kernel 2.4.17 > >
Si, due: passa a 2.4.18 e poi accertati di usare un diff file piuttosto: non e' detto che quello che hai trovato sia codice per la tua release di kernel. Usare patch --dry-run e' un simapatico modo per accertartene. -- Francesco P. Lovergine -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]