Un saluto a tutti.
Non riesco a masterizzare on the fly.
Come hardware ho un Waitec Shuttle ed un normale lettore da 40X.
La configurazione è questa:
master primo canale: hard disk
slave primo canale: lettore cdrom
master secondo canale: masterizzatore
slave secondo canale: hard disk.
Ecco l'output di cdrecord in dummy mode:
[EMAIL PROTECTED]:~$ cdrecord -v -dummy dev=0,1,0 speed=8 -isosize /dev/scd0
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'WAITEC '
Identifikation : 'SHUTTLE '
Revision : ' 2,0'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1572864 = 1536 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 586 MB
Total size: 673 MB (66:45.58) = 300419 sectors
Lout start: 674 MB (66:47/44) = 300419 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -12525 (97:15/00)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 26
Manufacturer: TDK Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 59430
Starting to write CD/DVD at speed 8 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 14 of 586 MB written (fifo 1%).cdrecord: Input/output error. write_
g1: scsi sendcmd: no error
CDB: 2A 00 00 00 1C 56 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 6A 02 D1 04 13 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0
x0
Sense flags: Blk 1778569476 (not valid)
cmd finished after 2.982s timeout 40s
write track data: error after 14856192 bytes
Sense Bytes: 70 00 06 6A 02 D1 04 13 00 00 00 00 29 00 00 00 00 00
Writing time: 34.900s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
cdrecord: fifo had 298 puts and 235 gets.
cdrecord: fifo was 22 times empty and 3 times full, min fill was 0%.
Che succede? Perchè non funziona?
Ciao
Angelo
--
La mente e' come l'ombrello: per funzionare deve essere aperta.
-- Paolo Poli
