Ciao, Ho un problema molto strano sul mio portatile Dell inpsiron 5100 con Linux (Debian). Alcune volte il mio cd su hda viene trovato dal kernel e alcune volte no. (Ovviamente quando lo devo usare scopro che si e' verificata la seconda che ho detto). I due pezzi di listato di dmesg nei due casi sono riportati sotto (come vedete nel primo manca la riga >>>>hda: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive)
Qualcuno ha qualche idea su come andar dietro a una bega simile? Grazie Roberto --caso NON TROVATO il CD ------------------------------------------------------------------------------------------------------------ Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio hdc: FUJITSU MHT2030AT, ATA DISK drive blk: queue c043f4b4, I/O limit 4095Mb (mask 0xffffffff) ide1 at 0x170-0x177,0x376 on irq 15 hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(33) Partition check: hdc: [PTBL] [3648/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 > SCSI subsystem driver Revision: 1.00 ------------------------------------------------------------------------------------------------------------ ----caso TROVATO il CD ------------------------------------------------------------------------------------------------------------ Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: HL-DT-STCD-RW/DVD-ROM GCC-4241N, ATAPI CD/DVD-ROM drive hdc: FUJITSU MHT2030AT, ATA DISK drive blk: queue c043f4b4, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100) hda: attached ide-scsi driver. Partition check: hdc: [PTBL] [3648/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 > SCSI subsystem driver Revision: 1.00 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
