Avevo il sistema in "degraded array" con raid1. Ho spento il pc, aggiunto il secondo disco (perfettamente identico al primo, modello e partizioni)
Al riavvio ho dato un: # mdadm --add /dev/md0 /dev/hdg1 ed è cominciato il sync (che è durato 1 ora) Ma al reboot, il nuovo disco non lo vuole e torna in degraded mode. Ecco un estratto di dmesg: --------------------------------------------------------------------------------- hde: attached ide-disk driver. hde: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(33) hdg: attached ide-disk driver. hdg: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(33) Partition check: /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 /dev/ide/host2/bus1/target0/lun0: p1 p2 p3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: raid1 personality registered as nr 3 [events: 00000014] md: bind<ide/host2/bus0/target0/lun0/part1,1> md: ide/host2/bus0/target0/lun0/part1's event counter: 00000014 md0: former device ide/host2/bus1/target0/lun0/part1 is unavailable, removing from array! md0: max total readahead window set to 124k md0: 1 data-disks, max readahead per data-disk: 124k raid1: device ide/host2/bus0/target0/lun0/part1 operational as mirror 0 raid1: md0, not all disks are operational -- trying to recover array raid1: raid set md0 active with 1 out of 2 mirrors -------------------------------------------------------------------------------------------------------- Ma perchè? il disco hdg è perfettamente funzionante, è riconosciuto al boot, e lo posso montare e smontare tranquillamente. Perchè dice che "md0: former device ide/host2/bus1/target0/lun0/part1 is unavailable" ? Ha qualcosa a che fare col superblock? Come faccio l'update del superblock dei 2 dischi? Se lo riaggancio all'array con mdadm funziona, fa il sync, ma al riavvio lo perdo... -- PicoStreamer - the real WEB live streaming software vinz486.com