On Fri, Oct 07, 2005 at 11:46:39PM +0200, confrey wrote: > Mattia Dongili ha scritto: > > >On Fri, Oct 07, 2005 at 04:23:13PM +0200, Luca Bruno wrote: [...] > Scheda multifunzione 3Com 3C562D/3C563D; è una LAN 10Mb+Modem33.6; in XP > non viene riconosciuta, è però presente nel database dei driver, > installato il driver il sistema dice 'Impossibile avviare la > periferica'; funzionava su un NB IBM vecchiotto (Pentium 90)
?? cioe' non funziona?? non mi ancora e' molto chiara la cosa.... ma tant'e' > Adattatore DelkinDDCFFLS1-AD, adattatore da CF a PCMCIA, in XP funziona. allora magari prova con questo. > Poi c'è il lettore integrato di SD, che in XP ovviamente funziona, e, > sempre dalle proprietà hardware di XP, mi pare di capire che funzioni > sempre attraverso il bus della PCMCIA > > Ecco il cat di /proc/iomem : > > dariomlap:/home/dario# cat /proc/iomem [...] --> 0x1e000000 > 1e000000-1e000fff : 0000:00:09.1 > 1e000000-1e000fff : yenta_socket > 1e001000-1e001fff : 0000:00:09.0 > 1e001000-1e001fff : yenta_socket > 1e400000-1e7fffff : PCI CardBus #02 > 1e800000-1ebfffff : PCI CardBus #02 > 1ec00000-1effffff : PCI CardBus #06 > 1f000000-1f3fffff : PCI CardBus #06 --> 0x1e000000 + 0x2000000 = 0x20000000 > cfd00000-dfcfffff : PCI Bus #01 > d0000000-d7ffffff : 0000:01:00.0 > d0000000-d0ffffff : vesafb [...] > il dmesg : > dariomlap:/home/dario# dmesg > ntries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 > 00000000 00000000 > CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 > 00000000 00000000 eh... questo dmesg non e' proprio completo... facciamo che ce lo rimandi (completo e prima di fare il suspend, dopo aver fatto il boot fresco fresco, nente S3/S4) passando al kernel 'reserve=0x1e000000,2000000' e dopo aver provato ad infilare l'adattatore SD? Nota: se mai ti capitasse di usare un kernel 2.6.13, sappi che le pcmcia-cs diventano inutili, e' necessario installare pcmciautils (non ancora in Debian). [...] > Linux Kernel Card Services > options: [pci] [cardbus] [pm] > ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 > Yenta: CardBus bridge found at 0000:00:09.0 [1734:106c] > Yenta O2: res at 0x94/0xD4: 00/ea > Yenta O2: enabling read prefetch/write burst > Yenta: ISA IRQ mask 0x0000, PCI irq 17 > Socket status: 07070000 > ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 17 > Yenta: CardBus bridge found at 0000:00:09.1 [1734:106c] > Yenta: ISA IRQ mask 0x0000, PCI irq 17 > Socket status: 00000000 [...] > cs: IO port probe 0x0100-0x04ff: excluding 0x480-0x48f 0x4d0-0x4d7 > cs: IO port probe 0x0800-0x08ff: excluding 0x818-0x837 0x840-0x84f > 0x858-0x89f > cs: IO port probe 0x0c00-0x0cff: clean. > cs: IO port probe 0x0a00-0x0aff: clean. > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c0315d40(lo) > IPv6 over IPv4 tunneling driver > mtrr: 0xd0000000,0x2000000 overlaps existing 0xd0000000,0x1000000 LOL, insisto, il 'reserve=...' passato al kernel dovrebbe risolverti i problemi -- mattia :wq!